CAN I CONNECT 5.1 SPEAKERS FOR DV6-6121

i purchased creative inspire t6160 5.1 speakers for dv6 6121tx laptop, i do not know how to configure in laptop. pls help me

saham wrote:
I conclude that I cannot use any 5.1 Computer Speaker sets that go with my Macbook Pro 13 and get a real Dolby sound,right?
"Computer speakers" Basically no. They mosty are either stereo analog (for music playback) or 5.1 gaming PC speakers that are married to a 5.1 sound card for PC towers.
You would have to have a stereo reciever and 5.1 speakers that can accept:
1: Toslink optical inputs
2: Decode Dolby Surround Sound
3: The media your playing back must have a Dolby sound option.
Most 5.1 computer speaker setups are for gaming PC towers and takes a sound card that does the processing for each channel, has three analog wires
Wire 1: Left and Right front channels
Wire 2: Left and Right rear channels
Wire 3: Subwoofer and center, common ground (returns all the used electrons to complete the loop)
Your Mac has none of these, it's just a stereo analog, 2.0, a left and right channel, common ground (three sections on the plug)
So no you can't use a PC based 5.1 system on a Mac, unless you bridge the first two wires either with adapters or splicing the cables. Then it's not true surround sound, just two stereo channels that fills the room with sound.
With true surround sound, you can hear people creep up behind you, bullets whizz by your face, planes flying past overhead. It's a more immersive experinece.
So unless the "computer 5.1 speakers" has it's own Toslink optical inputs and decodes Dolby (and other) surround sound formats, has a built in amplifier to power speakers, then no. As most 5.1 comptuer speakers are designed for PC 3D gaming, thus inexpensive.
The Mac market for 3D gaming is rather small, tiny in fact. I haven't seen any "computer speaker" setup with the required stuff to playback true suround sound.
Mac's are used for music and video production, that's why they have the better optical ports.
Your just going to have to buy a home theater system to playback Dolby 5.1

Similar Messages

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

How big do you believe an ATV is? They are tiny compared to most devices.
The ATV is the only AirPlay receiver, short of an actual AV receiver with AirPlay support, but those are MUCH larger.

Can't connect to airplay speakers from iTunes

I suddenly can't connect to airplay speakers from iTunes on my new Macbook Pro - they are visible but cannot be selected. I can connect to them from other Macs and iPads. Can anyone help, pls? I have set the whole network up several times, rebooted system ie.

I had this happen to me on the odd occasion but now have it sorted. If I'm going to use my Airport Epress(s) I first make sure that my PC is connecting to the AE before I even turn on iTunes.
A problem I was having was that my PC was connecting to my wireless router by default (specifically when my laptop was turned off) and not to the AE. As a consequence when iTunes started it greyed out the remote speakers and sometimes the button was not even showing up.
Now that I ensure my PC is talking to the AE everytime I do not have a problem.
I do have one annoying thing with the AE setup though, if I'm playing music over the AE and I unplug any USB device (printer, USB Key, External drive etc) the wireless connection is broken and I have to start iTunes. I suspect it is a hardware issue relating to my particular HP PC as I have just reformatted and reinstalled Windows XP and it still happens. I can live with it.

Safari can't connect to local server for AirPlay and printer

I have several Airplay devices and one printer set up using Bonjour or AirPlay. This is all on most up to date Mavericks, iOS 7, and 2009 iMac.
In the past, I used to be able to enter an IP address (like for the printer or a powered speaker) and log in to check for firmware updates, etc. But now, while the speakers and printer ALL connect and play/print fine from my Mac and iOS and are clearly on my local network — when I try to access the sites for each — Safari says it "can’t connect to the local server because, it can’t connect to the local server"!
What is happening and, how can I regain web access to these devices?
It does not seem to be the printer, two powered speakers, or a small Wi-Fi device used with an AV stereo. They are all made by different companies and all can’t be broken. Especially, since they all work fine except for access to their internal web sites.
What do I have set, somewhere, that would block out web page access in the local network?

Well, I never could get the Bonjour menu to access device settings in Safari.
So I looked to see if Bonjour could work in Chrome or Firefox. It can!
But you need a plugin. I used Ciaociao in Firefox (I think also for Chrome). It places a small globe icon with other things you added like Pinterest, etc. in the tab bar.
It worked like a charm. I selected the devices from a Bonjour menu Ciaociao presents, accessed the settings, downloaded firmware updates, changed names, etc.
Clearly, there seems to be a Bonjour Safari issue. At least with Mavericks.
It was disappointing that hours with multiple Apple techs did not solve this. A lot of time on hold too. Nobody really knew about Bonjour or Airplay at all. Everyone wanted to pass me off to some other “device” when, it was not a device issue but the broader “internet of things” issue.
Apple is clearly unprepared for customer service in this high growth area.

Can't connect to remote speakers via AE

I just finished reconfiguring my home network. I believe the Airport Express is happily connected wirelessly to the network (though it doesn't seem to be making the signal to the iPad any stronger) since its light is green and it can be seen on both the iBook (running 10.4.11) and the iMac (running 10.6.8). I use the iBook almost exclusively to play music which is stored on an external HD on a set of external speakers directly connected. iTunes on the iBook is 9.2.1 (5). Re configuring the home wireless network freed the AE to be moved to the home theater setup and I want to play my music on those speakers using airtunes. The AE is plugged into a power strip which it doesn't share, its light is green, an audio cable connects it to the in port on the speakers which the manual indicates is the correct port. The speakers are on, that port is selected. I can see the speakers in the speaker list in iTunes and they are selected. When I select a piece of music, it says connecting to the speakers then says the network connection failed. Can anyone point me to where to look or how to find where the connection failed?

I am also experiencing this. However it is going one device at a time. I have an iMac and macmini close to (cable connected) to a timecapsule. First the iMac showed this (just not accepting connection to express/airport speaker). Then the macmini and now 1 of 2 iPhones. The MacBook air does still connect though. At one point I did see an error message briefly, -100056 I think.
Anyone got any ideas?

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

Can sign in with Apple ID, but can't connect to App Store for updates

My wife just received her new iPad on Friday. When she went to update the apps that indicated they needed to be updated, she was able to sign in with her Apple ID. However, after a few seconds of processing the message appears that her iPad was unable to connect to the App store. (She was connected to the internet through WiFi). The next day at the Apple Store, the same thing happened as well as to other users, including those at the Genius Bar so we are not alone. Any insights? We thought that by the end of the weekend the issue may have been resolved (high traffic / server overload???) but still locked out of the App store.

OK so here is what seems to be the problem -- Apps and under which account they were purchased / downloaded. My wife had downloaded a slew of apps under my Apple ID in the past, so when she attempted to sign in with her Apple ID there is now a conflict (this was not an issue before iOS 5.1 or so it seems). This simple fact totally prevents access to the App Store. This explains why my iPhone could connect to the App Store (it only has apps downloaded with my Apple ID) and hers could not.
So we sat down and made a list of all of the apps on her iPhone and iPad (the ones she wanted to keep), then went into iTunes and clicked on APPS (under Library in the left column). Once you are in there, a list of apps installed appears. Right click (option-click) on each app icon to GET INFO -- this displays which Apple ID account was used to download that particular app. (Thanks Rysz)
Thankfully all of the apps that were causing the conflict were free, so it was simply a matter of deleting these particular apps off of iTunes (on her iMac -- right click to delete) as well as her iPhone and iPad. Then all you need to do is re-download them when she is signed back into the App Store with her Apple ID.
After I deleted all of the apps, I again tried to sign in to the App Store to re-download the apps she wanted to replace. But I was still getting the dreaded error message stating "Can't Connect to App Store". So on her iPhone I went to Settings and reset the network connection, signed back in to our Airport WiFi network. Tried again, no luck. Signed out of the App store and re-signed in, and glory hallelujah -- I was now able to access the App Store and start the download process for both the iPad and iPhone (thanks Thom_D for the suggestion).
Once everything was back to normal, plugged each device in separately to her iMac and resynced in iTunes. Knock on wood, I think it is now working like before.
Hope this helps a fellow user out there.

Can I connect iPhone to iPad for direct backup and download?

I am a Windows 7/64 user. I have an iPhone 4 and am thinking of buying an iPad, cheaper than a whole new Mac. I regarded the iPad as a small computer, and thought that one might use it to make backups of the iPhone and download eg films or other stuff from it. Now a friend told me that it is not even possible to connect the two devices to one another and that any interaction between the two would have to go through a computer. So what is the use of the iPad, when it is no more than a heavy and clumsy iPhone?

I do not fully understand all of the ins and outs of iCloud either. I use iCloud in very "limited doses". The greatest feature of iCloud - IMO - is that you can download purchased content again at no charge as long as you use the same Apple ID. There are some limitations based on where you live - but in the U.S - all of this is available to you.
I also use iCloud to back up my Pages documents and currently only the Apple iWorks suite of apps, pages, Numbers and Keynote, can make use of this feature of iCloud - As far as I know. The changes that I make on the documents will sync to my iPod Touch and I can download the documents from my iCloud.com account in order to work on them on my Mac. Revise them on the Mac, upload to my account again - and they appear on the iPad and the Touch with revisions in place.
iCloud is still in its infancy, and even if it was "foolproof" or as foolproof as anything can be, I would never count on the cloud only to store my important files. I still backup to iTunes on my Mac and I backup my Mac with Time Machine. The use of iTunes is simply the vehicle through which all of your purchased content can be transferred to your computer for safe keeping. iTunes will store your media, apps and photos - and the backup process using iTunes - provides a way to save your settings, app data, camera roll photos, bookmarks, - in essence - the "stuff" that your apps produce - if that makes sense to you.
Read this to learn more about iCloud. This is covers everything from soup to nuts. The articles contain links to other articles with more information as well. You may even want to peruse the iCloud forum for more information.
http://www.apple.com/support/icloud/

Can't connect to app store for IAP.

I've been trying to buy an IAP item in Defender Chronicles II but when I try to buy it I get a message "connecting to app store" and it stays on that screen until I leave the app. I've been trying for about a week now and have left it on that screen for up to half an hour. I also tried to connect to IAP stores on different games (Tiny Tower, DC1 and Elf Defence) just to check if it would work but the same thing happenes.

Can you connect to the regulat App store on the iPod?
Have you tried on another network?
Try a reset. It cures many ill and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Can you Connect Cisco switch modules for to N2K?

I have not seen anything about connecting Cisco Switch modules for Blade Chassis to fex. Does anybody now if you can do that?
thank you.

thank you Lucien.
I think you got a right name for N2Ks, a NIC card extender. In my opion N2K should be able to support Blade switches. Not every company has just rack mount servers, most enviroment is mixed. In my case, I run out ports on N5K, but plenty available on N2K. I want add two more blade centers with gig switch modules in them. now I have to buy a N5K!!!. I'm sure Cisco can make N2K to support switches too.

ITunes Error -3256 can't connect to remote speakers

iTunes is behaving erratically. I get a -3256 error when the app tries to connect to remote speakers via an AirPort Express.
Restarting iTunes allows me to connect. iTunes then works until my computer goes to sleep. When I wake the computer it hangs with the -3256 error again. Restart iTunes and it negotiates the network connection perfectly.
I ran AirTunes with no problem for years until version 8 of iTunes was released.
I'm running iTunes 8.0.2

I'm having the same problem with my macbook pro (OS 10.5.6, iTunes 8.0.2) but NOT with my imac flatpanel 15". I get "An error occurred while connecting to the remote speaker "Stereo". An unknown error occurred (-3256)." Restarting iTunes does NOT work for me.
My airport is administered by the older imac flatpanel. My girlfriend's computer - an older macbook pro - does NOT have this problem. Has anyone gotten an answer yet on this?
Is this a known bug since so many of us seem to be seeing it?

Why does the can not connect to App Store for the iPad Air? I click on popularity after searching and something pops up saying can not connect to App Store.

I type in a app and sometimes it pops up saying can not connect to App Store, but it does go later on and when I click ratings or popularity it pops up saying can not connect to App Store. Idk why that happens anyone have same problem? Solutions?

I have the itunes and app store working now, but my FB app and FB on Safari will not work and other websites are not working very well on Safari...any ideas?

ITunes can't connect to remote speakers PLUS Airport Express p/word problem

I am running iTunes 7.4.1 and have previously been able to play iTunes through remote speakers via an Airport Express . After upgrading iTunes some time ago, I am unable to connect to the AE any more. The AE shows as an option in my iTunes window, but when I select it from the drop down option box bottom right, it just doesn't choose it.
I have read other discussions pertaining to this, and have followed all of those solutions, but to no avail.
I have done a hard reset on the AE restoring it's factory settings thinking I should just start again, and it has been renamed "Base Station Oa369f" so I know this has worked, but when I try to reconfigure it through Airport Utility, it asks for a password. I tried it's old password, and also tried the generic one "public" as stated in the AE setup guide, but it rejects both.
I am keen to figure this out as I'm about to buy a new printer and another AE so I can print wirelessly, but don't want to have the same issues if it's an AE bug that can't be fixed, I would be left with no printer!
I know this is two quite separate problems, but if anyone has any ideas for either I would be really grateful.
Thanks very much

I have exactly the same problem which has been driving me nuts for the last couple of days. However I am able to access the dropdown list of speakers. I have mine set to multiple speakers, and now it WILL play through my Airport Express again, but only when playing through the internal speakers at the same time. When I try to play solely through the Airport Express it just hangs.
Come on Apple, you need to be regression testing your upgrades far better than this, for something so basic to go wrong.

ITunes can not connect to remote speakers after upgrades

I recently downloaded the new version of iTunes and I am no longer able to connect to my remote speakers. I get a random error message when trying to connect. I've rebooted the airport station and modem. Didn't solve the problem.
Can anyone help? I'm stumped...

I have a MacBook, airport express and appletv. All three were working with airtunes on itunes 7 without issue. Since itunes 8, airport express works great, but the itunes keeps reporting that my appletv speakers are no longer available.
Problem will occur on sleep/wakeup and whenever itunes decides it is angry, even though my appletv is listed on the bar and is syncing. Sometimes it will play for about 10 seconds and then the music stops, but itunes indicates it is still playing. Pause/play will sometimes resolve the issue, but other times will report the appletv speakers have disappeared, but itunes is still listing the apple tv. Rebooting appletv makes no difference.
Workaround has been to restart itunes. For the music stopping after 10 seconds, if restarting itunes results in the same problem, reboot computer. My firewall is disabled, so my opinion .
Also - I love the remote app on my touch, but when play fails due to a speaker error there is no feedback. Instead I get no music and after a delay the icon changes from pause to play again. Of course itunes was complaining about unavailable speakers. Someone should add some intelligence to report such errors to the remote.

How can I connect 5.1 speakers to Macbook Pro 13 bought Summer 2011

Hi all
I am very new to the mac world. Basically I need to know how I can connect my Macbook Pro 13" to a 5/1 set of speakers.
Do I need something to plug to mini display port?
Thanks

saham wrote:
I conclude that I cannot use any 5.1 Computer Speaker sets that go with my Macbook Pro 13 and get a real Dolby sound,right?
"Computer speakers" Basically no. They mosty are either stereo analog (for music playback) or 5.1 gaming PC speakers that are married to a 5.1 sound card for PC towers.
You would have to have a stereo reciever and 5.1 speakers that can accept:
1: Toslink optical inputs
2: Decode Dolby Surround Sound
3: The media your playing back must have a Dolby sound option.
Most 5.1 computer speaker setups are for gaming PC towers and takes a sound card that does the processing for each channel, has three analog wires
Wire 1: Left and Right front channels
Wire 2: Left and Right rear channels
Wire 3: Subwoofer and center, common ground (returns all the used electrons to complete the loop)
Your Mac has none of these, it's just a stereo analog, 2.0, a left and right channel, common ground (three sections on the plug)
So no you can't use a PC based 5.1 system on a Mac, unless you bridge the first two wires either with adapters or splicing the cables. Then it's not true surround sound, just two stereo channels that fills the room with sound.
With true surround sound, you can hear people creep up behind you, bullets whizz by your face, planes flying past overhead. It's a more immersive experinece.
So unless the "computer 5.1 speakers" has it's own Toslink optical inputs and decodes Dolby (and other) surround sound formats, has a built in amplifier to power speakers, then no. As most 5.1 comptuer speakers are designed for PC 3D gaming, thus inexpensive.
The Mac market for 3D gaming is rather small, tiny in fact. I haven't seen any "computer speaker" setup with the required stuff to playback true suround sound.
Mac's are used for music and video production, that's why they have the better optical ports.
Your just going to have to buy a home theater system to playback Dolby 5.1

CAN I CONNECT 5.1 SPEAKERS FOR DV6-6121

Similar Messages

Maybe you are looking for