Can i connect a HD console to imac 2013

just wanted to know if it is possible to connect a PS4 or other console to my iMac 8GB ram osx uosemites 2.9GHz i5 2013 model.

You might want to read just a bit as the info is covered ad infintum but the back of the cards have 4 connectors. 3 for hooking up analoge surround speakers and one Flexi jack. If you want more connectors which means you will need eith the Platinum or FPS which come with a front panel dri've and adds a bunch or connectors including a headphone jack and a line2/mic2, in/out spdif, Optical in/out, RCA r/L, and midi in/outs.

Similar Messages

  • Can i connect intel NUC to my imac 21.5 with thunderbolt cable

    can i connect intel NUC to my imac 21.5 with thunderbolt cable

    I have an Intel NUC with Thunderbolt and an iMac Late 2013 27" and I can't get this to work.
    Has anybody got this working??

  • I can´t connect Facetime calls from my Imac or Macbook pro, i can only make it from my iphone 4. why is that? in my imac and macbook pro i have OS X 10.8.5

    I can´t connect Facetime calls from my Imac or Macbook pro, i can only make it from my iphone 4. why is that? in my imac and macbook pro i have OS X 10.8.5

    FaceTime for Mac: Troubleshooting FaceTime - Apple Support

  • Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    It depends.

  • Can't connect to volume of shared iMac but used to be able to

    I'm really hoping someone can help me with this as I've been struggling with it since my upgrade from Tiger to Leopard. I run OS X 10.5.2 (all updated,etc.) on two machines - an Intel Macbook and iMac, with an airport extreme base station (updated) as the router. Both are using the same account names, but have different computer names (B's Macbook, B's iMac, etc.). So, attached to the iMac is an external hard drive connected via FW800, split into two volumes (Time Machine, Video Library). When I first tried to share these after the upgrade to 10.5.0 I had various permission errors with that "Unknown" user account. That seems to have been all cleared up, and in fact the two aforementioned volumes (Time Machine, Video Library) are now completely new and on a new FW drive. Problem is, I can't connect to the "Video Library" from the Macbook, even though sharing is allowed and I can connect to the the "Time Machine" volume fine. It shows up in the finder sidebar, under the Macbook, but when I try to connect I get this..
    the operation cannot be completed because the original item for "Video Library" cannot be found
    When I view the iMac via the Samba share listed in the finder (since Windows Sharing is turned on via the iMac - and I tried turning this off, doesn't change anything) I see 8 volumes labeled video library, video library-1, video library-2, etc. all the way through video library-7. Now, I click on these and get the same error. But I am 99% sure that Leopard is confused and can't find the correct link to the Video Library because all of these dead links are still floating around somewhere, but I don't know how to clear it out and reset. In fact, I used to have the same problem sharing the Time Machine volume, but during one replacement of the hard drive, I changed the volume name from "Time Machine Drive" to just "Time Machine" and it of course started working fine, I can access the drive without problems, etc.
    So, after all of that explaining, it really comes down to the fact that something seems to be stuck in Leopard thinking that the link to the "Video Library" volume is broken or invalid, Smaba sees it as 8 volumes (btw all other shared volumes have only one entry in the Samba view), and everything is confused. The working solution would be to rename the Video Library volume, and connect. Problem is I have over 1,000 movies/tv shows/etc. in iTunes on that drive and if I change the volume name all those links will get screwed up. Any other ideas? I've spotlight searched for video library-# to look for a preference file somewhere that is trying to remember the link, but to no effect. I am sure it has to do with the growing pains associated with the upgrade from Tiger to Leopard and the user IDs, etc. Repair permissions won't work since it's an external drive. Any thoughts?
    Thanks so much in advance.

    Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

  • Can't connect my iPad to my iMac after upgrade!

    I upgraded my iPad Air to the iOS 8.0.2 yesterday, and after I did, I can't connect it to my iMac. When i try, with USB cable, it just jumps between being connected and not being connected.
    I didn't have this problems before the upgrade on my iPad.... Can someone help me please?

    Do you have the latest computer iTunes 11.4?
    If you don't you can download it here below
                                Download iTunes Get the latest version of iTunes for Mac or Windows. Download now                         
    If still no joy,  try troubleshoot below
    iOS: Device not recognised in iTunes
    Mac: http://support.apple.com/kb/TS1591

  • Can you connect a pc to an iMac (to move iTunes library)?

    Since nobody answered my detailed request (https://discussions.apple.com/thread/5225308?tstart=60) maybe someone will be able to answer the key question.
    Can you connect a laptop (with an external hard disc attached already) to an iMac, and iMac recognizing both as "hard discs" so that I can move my iTunes library from the external harddisc to the iMac?

    YesEtc wrote:
    ...I need find a way to have the mac see the drive while iTunes is opened with the "X" drive attached and recognized...
    Not on a Mac you don't. OS X doesn't use drive letters and doesn't require them.
    On the PC, go to the iTunes folder (I don't know where it is stored in Windows) and copy all the .itl and .itdb files to the iTunes folder on the external HDD. Connect the external to your Mac. Launch iTunes while holding down the Option key. In the dialog select "choose library" and navigate to the iTunes folder on the external. Select and click OK. This will set up iTunes on the new Mac just like it was on the PC. You'll need to have the external HDD connected and mounted before you launch iTunes so you can listen to the music.

  • Can't Connect ASDM and Console Forces User Name: & Password: Prompts

    After pulling a brand new ASA 5515 out of the box this morning, I spent countless hours scratching my head wondering why:
    1. I cannot establish an HTTPS connection to the Management port - https://192.168.1.1/admin
    2. When connecting via the console port I get prompted with a username and password sequence that I don't know
    I get an SSL Version Error message when I try to connect with any browser. although I did find a way to resolve it, it requires a console port connection which is not working either.
    This is not my typical experience with the console or ASDM port setup. What is going on? Any help from anyone would be so appreciated.
    Thank you,
    Richard

    Hmm,
    To my understanding Console connection on a fresh unit shouldnt ask for a username and it shouldnt even have an enable password (should be able to leave it blank and press enter). Or atleast that is how I remember it.
    I am not sure if the new ASA5500-X models are different.
    I think on when using ssh (or was it telnet) without username configured required you to use username pix and password cisco to log in.
    - Jouni

  • Windows XP SP3 and Outlook 2010 can't connect with Exchange 2010 or Exchange 2013

    XP+SP3+Outlook 2010 can't connect to Exchange 2010&2013 in the internal network without safe mode.

    Hi,
    Did you get any error messages?
    Do you have Outlook Anywhere and autodiscovery set up properly?
    Can you ping the Exchange server?
    Please use Test Email AutoConfiguration
    to test if the Autodiscover service is configured properly. See:
    https://hosting.intermedia.net/support/kb/default.asp?id=2150
    We can also use the remote connectivity analyzer to troubleshoot the issue:
    https://testconnectivity.microsoft.com/
    In addition, turn off your firewall and anti-virus to check the result.
    Hope this helps.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Can i install Windows XP on new iMac 2013 to use quickbooks

    I have just bought a new iMac 2013  and need to use my Windows Quickbooks programme for our small business. I understand that I can use Bootcamp to  install my Windows XP and then Quickbooks 2010/11.
    Is it true that the new iMac  Bootcamp no longer supports Windows XP?  I realistically only use the Quickbooks every 3 months. What is my best solution to be able to use Quickbooks on my new iMac

    No. Boot Camp only supports Windows 7 or Windows 8. If you want to use XP, then you will need to use virtualization software such as:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         2. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         3. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         4. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • I still can't connect to wifi on my iMac 10.9.4!

    I Honestly don't even know what to do know. I haven't been able to connect for a while. After I got the 10.9.4 update it would work for maybe a couple hours but know it just won't work and I don't know what else to do because I have tried everything that people say will "fix" this issues. I'm on an late 2011 iMac running Mavericks 10.9.4. Please someone give me an answer!

    Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
    If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
    Are any other devices on the network, and if so, are they the same?
    If you can connect to more than one network, are they all the same?
    Are all network applications affected, or only some? If only some, which ones?
    Disconnect all other devices from the network. Any change?
    Start up in safe mode and test. Any difference?
    Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
    If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

  • How can I connect 2 projector in a imac

    I have a imac whit one projector conect al ready I need conect another one I have the adaptor for mac conect already in the conputer but 1 screm is already done the other is blue screm what can I do to have the imagen?

    I haven't tried it, but another option, OWC USB 2.0 Display Adapter ...
    Features
    Works on PC and Intel Mac models
    Lossless compression
    LCD, CRT, projector displays
    Connect one extra monitor per adapter to your desktop or laptop's USB port!
    Configure connected monitors to either clone your primary screen, or extend the desktop allowing visibility of more applications at the same time!
    Display Modes:
    Can easily Mirror the main display
    Extend left, right, above, or below
    Can be rotated left, right, or upside-down
    Windows Vista & 7 Aero support
    Windows XP and Vista 32-bit support
    Standard and Widescreen ratio aspects
    High-Performance DDR memory
    Completely silent operation
    Uses very little computer resources and offers a vast array of screen resolutions and color depths ensuring little performance difference between a screen directly connected or via USB 2.0
    Supports resolutions up to 2048 x 1152 including SDTV/HDTV resolutions: 480i/p (640x480), 720p (1280x720), 1080i/p (1920x1080)
    Bus Powered Operation - no external power supply needed
    Requirements
        * Available USB 2.0 port
    Compatibility
        * Macintosh
              o Intel based Mac OS X 10.4.11 and above
              o Supports up to four monitors
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

  • Can't connect Sony DCR-TRV38 to iMac

    This is an older Mini DV camcorder that I am trying to connect by USB. iMovie doesn't recognize it at all. I don't have a firewire and don't know whether a standard one (from Best Buy eg) would work on this camera - i.e., is the connector the same? Can't find much about this specific model on the web. Any advice? I'd really like to transfer my old home movies onto iMovie for editing now that I have the time. Any and all advice is most welcome. Thank you.

    You need a firewire cable. If your iMac has Firewire 800, get a 4 pin to 9 pin firewire cable. If your iMac has Firewire 400, get a 4 pin to 6 pin firewire cable. Your camera must be plugged into a wall outlet (not on batteries.)

  • Can't connect to em console

    I installed OEM GC R2 with new database. The installation is successful. But when I try to use em console with "http:astham:4889/em", nothing shows up on browser.
    I checked the system,, the following are the output:
    1)
    The following information is available in:
    /usr/oracle/OracleHomes/oms10g/install/setupinfo.txt
    Oracle Application Server 10g 10.1.2.0.2 Usernames and Default password information: Please refer to the Oracle Application Server 10g Administrator Guide for more information.
    Install Type: J2EE and Web Cache Services
    Configured Components:
    Use the following URL to access the Oracle HTTP Server and the Welcome Page:
    http://astham:7777
    2)
    Content in portlist.ini:
    ;OracleAS Components reserve the following ports at install time.
    ;As a post-installation step, you can reconfigure a component to use a different port.
    ;Those changes will not be visible in this file.
    [System]
    Host Name = astham
    [Ports]
    Oracle HTTP Server port = 7777
    Oracle HTTP Server Listen port = 7778
    Oracle HTTP Server SSL port = 8250
    Oracle HTTP Server Listen (SSL) port = 4444
    ASG port = 7890
    Oracle Notification Server Request port = 6003
    Oracle Notification Server Local port = 6102
    Oracle Notification Server Remote port = 6201
    Application Server Control RMI port = 1850
    Oracle HTTP Server Diagnostic port = 7201
    Java Object Cache port = 7000
    Log Loader port = 44000
    DCM Discovery port = 7101
    Oracle Management Agent Port = 1157
    Application Server Control port = 1156
    Web Cache HTTP Listen port = 7777
    Web Cache HTTP Listen (SSL) port = 8250
    Web Cache Administration port = 9400
    Web Cache Invalidation port = 9401
    Web Cache Statistics port = 9402
    Enterprise Manager Central Console Port = 4889
    Enterprise Manager Central Console Secure Port = 1159
    Use the following URL to access the Oracle Enterprise Manager Application Server Control:
    http://astham:1156
    Instance Name: EnterpriseManager0.astham
    3)
    ./emctl status omsOracle Enterprise Manager 10g Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Oracle Management Server is Up.
    4)
    ./opmnctl statusProcesses in Instance: EnterpriseManager0.astham
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    DSA | DSA | N/A | Down
    HTTP_Server | HTTP_Server | 6648 | Alive
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | N/A | Down
    OC4J | home | 6653 | Alive
    OC4J | OC4J_EM | 8282 | Alive
    OC4J | OC4J_EMPROV | 6650 | Alive
    WebCache | WebCache | 16819 | Alive
    WebCache | WebCacheAdmin | 6652 | Alive
    5)
    ./emctl status agentOracle Enterprise Manager 10g Release 10.2.0.1.0.
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.1.0
    OMS Version : 10.2.0.1.0
    Protocol Version : 10.2.0.0.0
    Agent Home : /usr/oracle/OracleHomes/agent10g
    Agent binaries : /usr/oracle/OracleHomes/agent10g
    Agent Process ID : 17604
    Parent Process ID : 17595
    Agent URL : https://astham:3872/emd/main/
    Repository URL : https://astham:1159/em/upload
    Started at : 2007-05-30 15:47:08
    Started by user : oracle
    Last Reload : 2007-05-30 15:47:08
    Last successful upload : 2007-06-01 11:59:11
    Total Megabytes of XML files uploaded so far : 62.98
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 26.60%
    Last successful heartbeat to OMS : 2007-06-01 12:00:46
    Agent is Running and Ready
    It seems OMS and agent are started up. Why I can't deploy it?
    Thanks,

    I am having the above mentioned problem now after resetting my IE browser back to previous version from IE 9. It used to just say "cannot display webpage" and then in a second or two take me to the EM when I was using IE 9; but now it just doesn't connect. Any help is appreciated, I am preparing for OCA exam and therefore need all these tools to actually learn.

  • Can't connect ipad to Mountain Lion iMac via Internet sharing?

    Hello,
    I've always used Internet Sharing to create a wifi hotspot from my iMac, so that I can get an internet connection on my iPad.  After updating to Mountain Lion this does not seem to work.  Anyone know how?
    The hotspot generated by my iMac's internet sharing has never worked with my Kindle, but I would at least expect it to work with Apple's own products.  Hoepfully someone knows a solution?
    Thanks
    Bob

    Seems that the issue is something to do with connecting via WPA2. When I set Internet Sharing to use WEP (by option-clicking the security menu), I'm then able to see the network shares and the printer.

Maybe you are looking for