Can I connect a PC via LAN to my WLAN - connected time capsule?

Hi,
I haven't found any info on this in the forums yet:
The problem:
My WLAN - router is located in my living room and has loads of devices connected (iPhone, iPad, 2 Zeppelin Air, MacBook Air, some other Win - PCs etc...)
One of the PCs (Win 7) is in another room, connected via WLAN too.
I now have a time capsule near this PC and would like to connect these two via LAN and then use the WLAN connection of the time capsule for this PC too.
After connecting the Ethernet cable (which was working fine elsewhere) I see that there is a connection, but no access to the network.
Any suggestions would be highly appreciated.

You likely have the Time Capsule configured to "Join a wireless network". Is that correct?
If yes, the Time Capsule does not perform any routing functions in this type of configuration. In effect, it has become a wireless hard drive.
Therefore, the Etherent ports are not enabled, so there is no signal available at the ports.

Similar Messages

Can't connect time capsule to imac

I can't connect Time Capsule (TC) to the iMac. I get the following message: Another device on the network is using your ocmputer's IP address.

So does the Mac get an IP from the network or is it self allocated?
Does it have internet?
Can you please give me some more info.. I want the IP of the TC.. if still default then it is 10.0.1.1
What IP has your Mac got? Just get it from the network preferences. You have direct access via the airport icon.
We have seen any number of issues with Lion and latest TC firmware. Why it works on one computer and not another I don't know.
Try rebooting all the network items.. turn everything off and start in correct order with a few minutes in between.
modem---main router (TC if that is it)----wireless extenders----then clients.
Does the TC now appear?
If not from a computer that can access it, do a reset of the TC and change all the names to SMB compliant.
Short, no spaces no special characters.. ie pure alphanumeric.
Passwords can be longer.. but same rules.. nothing more than 20 characters.
Lock the wireless channels.. for 2.4ghz, 1, 6, 11, and try each in turn if you have issues.

Can't connect Time Capsule via Ethernet

I recently installed Montain Lion on a new hard drive, and want to use Migration Assistant to transfer my files and settings from a Time Machine backup on at Time Capsule. In the previous version of AirPort Utility you could change how your computer connected to a Time Capsule, and one of the options was via ethernet. In Mountain Lion this option is no longer available, and when I connect via an ethernet cable my computer doesn't seem to see the drive. Anyway to do this in Mountain Lion?

I can't get the AP TC to add on to an existing network in initial set up as , even though the option is available, the Airport Utility (6.3.2) doesn't seem to keep it selected, and wants to create a new network.
"Add" would be used for a wireless connection....and you indicate that you are using Ethernet to connect the existing modem/router and Time Capsule together....so the correct setup would be to create a new network using the exact same wireless network name and password as your existing network.
Connect an Ethernet cable from one of the LAN <--> ports on the current modem/router to the WAN "O" port on the Time Capsule.
Here, I am assuming that the TC will be located at least a room or two away from your main wireless router. If it is located any closer, there will likely be wireless interference issues between the two routers. The wired connection between the modem/router and Time Capsule must be maintained.
AirPort Utility will suggest a setup that looks somewhat like this.....except you will see a Time Capsule instead of an AirPort Express as illustrated below:
Network Name would be the name of your existing wireless networik
Base Station Name is a device name that you want to call your Time Capsule
Password is the wireless password of your existing wireless network
Verify confirms that password
Click Next and the setup utility will auto configure things for you in a minute or two
When you see the message indicating Setup Complete, click Done and you should have a green light on the TC.

Can't connect Time Capsule to wireless network...

I was able to backup my computer with Time Capsule if the computer and Time Capsule are connect with the internet cable. But then when I unhook the computer, it can't connect wirelessly. If I look in my available wireless networks, I do find the TIme Capsule network, but then I try to connect, it won't connect. I need some help connecting to that network so I can backup wirelessly!

If the computer can see the wireless network, connection issues can be poor signal or interference.
Wrong previous setup on the airport .. go into the network preferences for the airport and see if it is getting an IP address.. if it fails make sure the setting is correct.
Plug back in by ethernet and redo the wireless setup of the TC.
Use SMB type names.. Short, no spaces pure alphanumeric.
Use Fixed radio channels.. try in turn 1, 6, 11 (13 outside US) These are the only non-overlapping channels.
Use no security at all for testing.. but then WPA2 Personal is the only security rated for N wireless connections.
I recommend also giving a different name to 5ghz so you can force connection to the faster network.
If you still have issue change the mode of the wireless.. there are various manual options..
The idea is to reduce all auto settings so you can be sure it will work.
If you are on Lion or even Mountain Lion use the v5 utility. There are ways and means to install the later.

Can you control Apple TV via LAN from 3rd party control such as AMX or Crestron?

I would like to know if you can control an Apple TV via LAN with a 3rd party control AMX or Crestron - is there an API available for this? Two way communication would be ideal!

Become an Apple Developer and figure out how to do it. There may be an API on IOS to do it, but I'm going with Rudegar on this point. Almost certain that it's not possible.

I have a modem from my cable company that provides WiFi. When I try to connect time capsule to the modem via an ethernet cable I am unable to and I also lose my wifi connection

I have a modem from my cable company that provides WiFi as well as ethernet ports for internet TV and Sonos. But when I connect Time Capsule via an ethernet cable to the back of the modem I am unable to get it to work and I lose my wifi connection completely. I added Time Capsule to back up data and also to extend the reach of my wifi with an airport extreme hooked up by another computer.

Put the TC in bridge before you plug it in.. ie do the setup in isolation to the rest of the network..
I would also start a new wireless name on the TC so it is different to the cable router..
If you want to be exacting also set wireless channels so the cable router is set to say channel 1 and the TC set to 11 for 2.4ghz. Then plug it in.. you will have no trouble as the TC will get an ip address as part of the existing networking.. then extend the wireless using the extreme.

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

How to connect Time Capsule?

I am looking for a backup solution and I am consider a Time Capsule. Consider the following situation:
Mac Pro
Leopard
I have a few questions:
1. Can I connect the Time Capsule via ethernet and direct Time Machine to backup to the Time Capsule using ethernet?
2. If I do not use ethernet, can I use the USB port on the back of the Time Capsule to connect to my Mac Pro and use it with Time Capsule that way?
3. What hard drive manufacturer is used in the Time Capsule?
4. I understand the Time Capsule has built in WI-FI, but if I do not want to use WI-FI for back-up what are my other options if 1&2 do not work above to connect Time Capsule to my Mac Pro?
Thanks in advance,
Mike

Welcome to the discussions!
+"1. Can I connect the Time Capsule via ethernet and direct Time Machine to backup to the Time Capsule using ethernet?"+
Certainly.
+"2. If I do not use ethernet, can I use the USB port on the back of the Time Capsule to connect to my Mac Pro and use it with Time Capsule that way?"+
No, this is not possible. The USB port will support compatible printers and an outboard USB drive.
+"3. What hard drive manufacturer is used in the Time Capsule?"+
Difficult to say. I'm sure Apple uses different suppliers. The only way to know is to open up the Time Capsule (voiding the warranty). The "Get Info" command may possibly supply some general information.
+"4. I understand the Time Capsule has built in WI-FI, but if I do not want to use WI-FI for back-up what are my other options if 1&2 do not work above to connect Time Capsule to my Mac Pro?"+
You can connect to the Time Capsule via ethernet or wireless. If you do not intend to use the wireless capability of the Time Capsule at all, you can turn off the wireless using AirPort Utility, the setup application that is used to configure the Time Capsule.

Can I backup a powerbook operating 10.4.11 to a time capsule? If so how?

can I backup a powerbook operating 10.4.11 to a time capsule? If so how? I am already using another Powerbook with Time Machine to do automatic back ups but that operates on OS 10.5.8.

If you connect the Tiger PB via FireWire Target Disk Mode to the TM-ready computer, you may be able to archive it that way....

Connecting Time Capsule with WildBlue Satellite Service

HELP! Please...
I am trying to set up Time Capsule to work with my satellite service, WildBlue, and I can't get it working properly.
Before WildBlue was installed, I connected my iMac and my wife's iMac (it's on Mac OS 10.5.0), one at a time, with Time Capsule directly via Ethernet and back-up each iMac.
WildBlue satellite service was installed yesterday and the installer had no idea how to hook everything up. It was his first install. I was able to connect the WildBlue modem via Ethernet directly to my wife's Mac and made it work. When I try to add the Time Capsule, that's where I run into problems.
I ran the Ethernet cable from the WildBlue modem to the Internet WAN port on Time Capsule and I could not get it to work at all via AirPort. I tried using AirPort Utility and System Preferences - Network and could not get anything to work. I then ran an Ethernet cable from one of the four Ethernet plugs on the back of Time Capsule to the Ethernet plug on the back of my wife's iMac and was able to connect to the internet and get email on her Mac. I tried to run Time Machine, but it can't find Time Capsule! The only way it seems that I can get her iMac to do anything is to either connect it directly to the modem without Time Capsule or run the Ethernet cable thru Time Capsule to the iMac and not be able to connect to Time Machine. I still could not connect my iMac (it's on Mac OS 10.5.4) via Airport no matter what I did.
Can someone help me so that I can get Time Capsule connected and working the way it should?
My understanding is that I should be able to connect Time Capsule to the WildBlue modem via Ethernet and then connect my wife's iMac directly to Time Capsule via Ethernet and still be able to run Time Machine to back-up her iMac. Her iMac and the WildBlue modem sit in the same room together and my iMac is on the other side of the house where I want to use AirPort to connect to Time Capsule so that I can back-up my iMac and have access to the internet. If this isn't the way it is going to work can someone explain it to me on how it should and how I should set everything up to work correctly?
Thank you in advance for any help you can provide me.
Rod

You can, but devices connected to the D-Link switch will drop to a maximum of 100 Mbps speeds. The Time Capsule supports 1,000 Mbps or Gigabit speeds.
If you plan to transfer a lot of files using Ethernet, the numbers speak for themselves.

How can I erase (or remove) the hard drive from a dead Time Capsule?

How can I erase (or remove) the hard drive from a dead Time Capsule?

I found this having had the same problem...
http://forums.macrumors.com/showthread.php?t=553818
Having removed the hard drive I'm finding I can't reformat it. I manage to mount the HD but Disk Utility crashes when trying to format (HD attached to Mac via Newer Tech. SATA cables to USB) and causes what I think is a kernal panic on my Mac which hard crashes. I see 3 partitions when attempting to mount one of which is AFP. Anyone got any ideas about how to do this? I've dug around but the only progress I've made is to note others have had to work around ACL's when replacing the logic board of the TC. Not sure if this even relates to the problem. However the tool for doing this seems to have been removed from SL. (Forum references to this procedure all relate to 10.5).

I want to connect Time Capsule with Time Warner modem

How do you connect Time Capsule to a Time Warner modem? I am upgrading my Wi-Fi to AC and have a Motorola modem without AC, router and WiFi. I could just upgrade the Motorola modem, but I would like to use a Time Capsule. My connection to Time Warner usesd a splitter that goes to a DVR with the other end going to the Motorola modem by way of a coax connector.

Connect an Ethernet cable from one of the LAN <--> port on the Motorola modem/router to the WAN "O" port on the Time Capsule.
Power up the Time Capsule for a few minutes. At this point the amber light will be blinking slowly on the device.
On your Mac....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule
The utility will open up and take a minute to analyze the network, then display a window that looks like the screenshot below...except that you will see a Time Capsule on the screen.
Network Name......enter a simple name that you want to use as your wireless network name
Base Station Name....enter a simple name that you want to call the Time Capsule
Password.....enter a password that will be used for both the network and Time Capsule
Verify......verify the password
Cick Next
The utility will set up everything for you. When you see a green light on the Time Capsule, log on to the new wireless network that you have created and enter the password to connect.

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

It is a hard one.. laptops with small drives are a pain.
What you need is a home media server.
Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
https://www.apple.com/au/support/homesharing/
For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

I recently moved my Aperture Library file to an external hard drive. Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

I recently moved my Aperture Library file to an external hard drive. Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

One thing to bear in mind, if you are using Time Machine on your Time Capsule and have it set so the TM backup includes your external drive, you will effectively be backing up your Aperture library twice on the same drive, once with Time Machine and once with the vault. This isn't a problem unless you start to run out of space.
Another thing to note, vaults on network drives used to be flaky (i.e. not really supported) and required workarounds to be able to use them. I'm not sure if this has changed, but I just managed to create a vault on my TC ok.

Why can't I use iDisk for a back-up disk for Time Capsule?

G'Day All,
I am new to apple and mostly am loving it! Being new to this product has me asking some basic questions, like ... why can't I use iDisk for a back-up disk for Time Capsule?
Here I have something like 20 gb disk space available, but it seems I need to buy an external hard drive (or an airport) in order to use, what I believe is one of apples greatest inventions, the Time Machine...
Can anyone correct my flawed understanding or, better yet, teach me how to do it properly?
Cheers
Gabriel

Gabr1el wrote:
Thank you Pondini.
Speed makes sense, but I thought I had plenty of size available ... never mind! Looking over some of the other posts, it looks as though I'd be better off with an external Hard drive than the Apple Time Capsule (if I want more than 12-18months service).
That was true of some of the ones made a couple of years ago (many of which Apple replaced way beyond the warranty period, and even some beyond the 3-year AppleCare period). Presumably Apple has fixed the power supply problem in the newer units, so they'll last longer.
If you don't have AppleCare for your Mac, I'd strongly suggest buying it. If you do, and buy a TimeCapsule, Airport, or other accessory within 2 years, it's covered, too.
But unless you need a wireless router, yes, paying for one in a Time Capsule doesn't make sense. A good external HD is a much better buy.
thank you for the links - I am still getting used to the way Apples work ...
If you haven't found these yet, you may find some handy tips here: http://www.apple.com/support/switch101/
here: http://www.apple.com/support/mac101/
and some of the other videos listed on the Time Machine Tutorial page.

Can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

If you plan to store important "original" or "master" files and documents on the Time Capsule, then you might want to think about a way to back up those files to another hard drive.
Why? If the Time Capsule has a problem...and you have no backups....you lose everything.

Can I connect a PC via LAN to my WLAN - connected time capsule?

Similar Messages

Maybe you are looking for