Can I connect a stereo receiver to Apple TV and stream iTunes to my stereo?

I copied this question from a discussion archived from 2008, it's pretty much my question, although I hope to get a little more information on the answers... My stereo receiver (Sony STR-D511) is an older one but currently my TV (signal from Directv DVR) plays through the receiver on video 1 but I can't get the Apple TV to play through the stereo... My TV is quite new, a philips 1080, and the Apple TV is hooked in to HDMI 3, the Directv box is hooked into AV3, I believe I'm having issue with all the different sources my TV has and somehow I'm unable to cross the paths (make the connections) any ideas would be greatly appreciated as I would like the ability to play my itunes via Apple TV through my stereo receiver so that it's on the Stereo speakers rather then the TV Speakers.

Hi, and firstly thanks for the reply... I think my TV back has different labeled areas, so I took a photo and posted -- I'm bad with the electronics terms and the  translating of it all - ( I attached a pic) - I hope this helps with the photos you can also see where I have
thing plugged in - that one with svideo/rca cables is AV 3, where my DVRbox is going - the red/white cables on the right without a yellow go to my video 1 input on my receiver... the cables on the side are for my dvd player which the audio only works thru TV as well... then also below the red/white ones is HDMI3 where the apple tv is going... that's why i thought the stereo would work because its right below the cables that go to the stereo?
i hope this helps thanks again for your time
cheers
L-

Similar Messages

  • Can I use airport express to extend my network AND stream iTunes???

    I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
    My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
    Thanks!

    Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
    If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

  • Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro).  Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects?   Any ideas??

  • What is the process for connecting ethernet.  Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left.  Note Airport wireless is working.

    What is the process for connecting airport extreme ethernet?  I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player.  The system preference network indicates "ethernet not connected" with red dot to left of this message.  The airport wireless works and has green dot to left of it.  The stereo receiver and blue ray player do not respond and give message not connect to internet.  Thank you.  /  cfpirate 

    It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
    After restarting, it worked.
    Thanks!

  • Can I connect my Lacie Space II - 2 Tb to an Apple TV and stream my movies in the LaCie to my TV through the Apple TV?

    Can I connect my Lacie Space II - 2 Tb to an Apple TV and stream my movies in the LaCie to my TV through the Apple TV?
    I would really like to have an apple TV to stream from and use also as media player in replacement of mt PC. Is this possible?
    Thanks

    Only if the content on the drive is part of your iTunes library and iTunes is running to manage the content for the Apple TV. You can't replace your PC with the drive for use with Apple TV.

  • Hi,recently bought an apple tv to connect  to my macbook,which is recently been upgraded to os x mountain lion version10.8.4.But i can't connect to that with my apple tv.Anyone can help me ????

    Hi,recently bought an apple tv to connect  to my macbook,which is recently been upgraded to os x mountain lion version10.8.4.But i can't connect to that with my apple tv.Anyone can help me ????

    not all macs support airplay mirror
    http://support.apple.com/kb/ht5404
    installing mtn lion is not! enough if your video card does not support it then you need to live without mirror or take your chances with airparrot

  • Can't connect to watch abc on Apple TV

    Can't connect to watch abc on Apple TV

    I'm having a problem with getting past the "Accessing ABC" with the "loading wheel of doom" screen.  Consistently will not load, and has not since I purchased the ATV last year.  Have restarted, then reset all settings and finally restored to factory with same ATV.  I have Comcast/XFINITY and have not reached out to them yet (I'm delaying that four hour hold time as long as I can.)  I have been able to activate one of the Disney apps using the same WiFi connection I'm using for ABC, and was able to stream video effortlessly when activated.  I am really frustrated that I can't get the Watch ABC app to load, and looking at the feedback given over the past year or so, responsibility has been shunted from Apple to ABC to the internet provider so that there seems to be no solid answer.  Any thoughts?  Thanks very much in advance

  • I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

    I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

    The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
    If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

  • Can I connect an ipad to a different computer than my iTunes library

    I have a quick question.
      I have an ipad that I purchased and used for a while in my home.  I synced it with my library on my computer. 
    My sister was looking to buy one for her son who has austium.  I gave her mine and left it synced to my library because of my kids I had alot of Apps that would be useful for her.
      She wants to transfer some photos to the ipad for her son to use in certine apps but does not want to have to email them all to the device just to get them on the device.
    So my question is can she connect the iPad to her home Computer and transfer the photos to iPad without loosing the information that is already on the iPad.  such as if she were to download iTunes onto her comp and sign in using my account info that she already has for purchasing apps.
    Reason for asking is that I live in Connecticut and she lives in Georgia, so the easy trip of handing the ipad back to me to sync doesn't work well.
    Thanks for any input you can give.
    Jeffrey

    Then you need the composite cable shown in the following:
    http://support.apple.com/kb/HT1454
    That has three RCA connection, video, L audio and R audio.

  • HT1825 Can I connect post cinema displays to my G4 and how?

    Can I connect post cinema displays to my G4 and how?

    You can use newer monitors but there are different ways to connect.
    It all depends on the video card installed in your computer. Different model cards had different ports. My G4 MDD has the ATI Radeon 9000 with one ADC port (abandoned technology) and one DVI port (useful technology). So we need to either see the description of your graphics card from System Profiler >Graphics/displays, a photo of the ports on your card, or both.
    As long as you find a monitor that shares the kind of ports on your Mac, you will be fine. I have a 2008-vintage LCD monitor on that circa 2003 MDD of mine. The MDD shipped with an Apple DVI-to-VGA adaptor so I can connect any monitor with DVI or VGA ports.
    There is an inconsistency in your equipment profile: No PowerMac can run OS 10.6. Please do "About this Mac" and verify your processor type and Mac OS version. Then you can edit your profile to avoid future confusion.

  • HT201441 I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

    I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

    Hello adilx
    The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/TS4515
    If the previous owner is not present
    Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
    Sign in to their iCloud account at www.icloud.com/find.
    Click All Devices to open a list of devices linked to their account, then select the device to be removed.
    Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
    When the erase is complete, click "Remove from Account" to remove the device from the account.
    After the device is erased and removed from the account, you can proceed with the device setup process.
    Regards,
    -Norm G.

  • HT1391 Where can i report my iPhone lost to Apple? and Can Apple lock it?

    Where can i report my iPhone lost to Apple? and Can Apple lock it?

    If you set up the Find My iPhone service prior to your iPhone going missing, then there is a chance that can be tracked and locked, though it depends on a number of factors: the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored. Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to sign up when you still have the phone and have to pay for the service. 
    If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit nor lock it, though if you set a screenlock passcode, it would be locked already. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance). 
    Regards.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • TS1629 How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

    How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

    go to home-sharing on Apple TV and type in your info as ask.
    hope this help

  • Can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    Investigate the Air Display App to see if it will do the job for you.

Maybe you are looking for

  • Unable to log and capture HD from HVR-25J

    Hi Does anyone know why I am not able to capture 1080i50 material from HVR-25J to the FCP 5 running in MAC PRO 3.0GHZ. The setup i have in the HVR is: i link set to HDV (i link off). video out is 1080i50 i link is connected to fire wire in mac and i

  • WPA2 Enterprise setup question

    I have been trying to complete a WPA2 Enterprise setup, and I have hit a wall in troubleshooting. The current setup has two SSIDs, but the users only use one of these SSIDs, and that one is setup as WEP (I know...I know). I have been tasked with gett

  • Delivery document creation using vl01n

    Hi, I want to create a delivery document using VL01n.i need to create the doc for a particular selected item if there are many items for the order.i want to delete the remaining documents. how to handle this in BDC.

  • Smartforms - issue in display page

    Hai , I have to dispaly the smartform in the below mentioned way. it has to display mara records(no of records changes dependending on customer)  & the last page with terms & conditions. in the ablove scenario, depending on the no. of records in the

  • Human Task generated Forms

    Hi, Human Task form generation generated set of forms and web app folders. Can this be directly deployed on the servers or is it just the template and lot more work needs to be done here? There were two directories one for War and another for ear fil