Can I connect an additional External HDD through USB?
Hi,
I would like to know if it's possible to connect an additional external HDD to the Time Capsule and share it like on the AirPort Extreme with "Hard Drive Sharing".
I think it's called an AirPort Disk, through USB.
Thanks!
I had two drives, two printers and a powered USB hub. The best I ever got the AEBS to read was the two printers and one drive. I haven't tried it yet with the Time Capsule as the hard drive onboard made the the other two expendable.
I still do have access to the secondary drive but am in the middle of an archive of the time capsule as there's something wrong with the Time Capsule drive or directory. Once I get that straightened out I will test two drives in the hub and see if Time Capsule is any better suited to multiple externals.
Message was edited by: John Teeter
Similar Messages
-
TS1373 how can i connect my iphone to computer through usb using windows 8?
how can i connect my iphone to computer through usb using windows 8?
If iTunes is installed, you just connect the iPhone to USB.
http://support.apple.com/kb/HT1386
You can also sync to iTunes using WiFi. -
Can't boot Arch from external HDD
Hi, well first off this is not my first Arch Linux installation, I'm using Arch for a little over a year now (coming from slack). But this is my first attempt to have Arch on an external HDD.
Alrighty, the situation is as follows: A rather new computer (supports booting from USB devices and the bios is set to boot from removable devices first) with a built in HDD and an external HDD that's connected to that computer via USB.
What I did: I connected the external HDD to the computer and booted off a 2008.6 Overlord core-CD.
Arch-Live recognized the internal HDD as sda and the external HDD as sdb.
I partitioned the external HDD using cfdisk and ran mkfs.ext3 on it (I didn't use any switches with that).
I started the installer, set my mount points (I should mention I'm not gonna use a swap partition here), installed the packages, well just went through the installation routine and installed grub in the MBR of sdb (the external HDD).
Then I rebooted. And this is what doesn't work: When I boot that computer with the external HDD connected the computer completely hangs right before grub would come up. It freezes completely, ctrl+alt+del doesn't work, I need to use the powerswitch to reboot the computer.
So I put the Arch-CD back in the CD drive trying to boot into my Arch System on the external HDD. So I started typing:
root (hd1,0)
kernel /boot/vmlinuz26 root=/dev/sdb1 ro vga=773
initrd /boot/kernel26.img
When I try to boot off that grub tells me that there is no such device as hd1,0. The funny thing is, that the auto copmletion in grub works for the kernel /boot/vmlinuz26 but it doesn't for the device /dev/sdb1, in fact even root=/de<tab> returns a "unrecognized string" message.
So this is what I did and I can't boot off my external HDD, neither can I boot into my system on the external hdd from the cdrom.
What am I missing here?The harddrive you boot from is in my experience always hd0. Could this mean your external disc is hd2?
Have you tried chainloading from the installer cd to your external disc? -
How can i Transfer Photos from iPad to an external hdd or USB drive?
Hey everyone,
Do you Know how to Transfer Files and especially Photos from the iPad to an external hdd or USB drive? I ll Be travelling for a Long Time and Wont take my MacBook with me, only the iPad, the Camera and an external hdd to Save Photos and Videos from the Camera. Thanks.
Best Wishes,
NickYou can't - external drives and flash drives can't be connected to the iPad for copying photos (or anything else) off the iPad. You can use some photo upload sites to store them on web accounts or cloud services, but for a large number of photographs you'll be better off with a laptop and external drives for backup.
-
"Can't connect to local MySQL server through socket '/tmp/mysql.sock'"
Data Services=3.1
Repository=12.2.2.0000
Red Hat Enterprise 5
Designer,Job Server,Job Engine=12.2.2.3
After an unscheduled server reboot with DS up and running when trying to start a job in either Data Services Management Console or DS Designer getting the following:
"Can't connect to local MySQL server through socket '/tmp/mysql.sock'"
The mysql.sock have never been in /tmp and on the production server it does not exist there and the production server is up and running correctly. If a link is created to mysql.sock(/home/user/boedge31/bobje/mysql) the job will start but return this message:
"Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source <localrepo> resulted in error <MySQL ODBC 3.51 Driver mysqld-5.0.46-enterprise No database selected>. The SQL submitted is <select VERSION, SECURITYKEY, GUID from AL_VERSION where NAME = 'Repository Version'"
I checked and AL_VERSION and the Version field exist.
Before the shut down DS was working correctly and had no issues. My best guess is a part of the repository was corrupted during the unscheduled shut down. It seems like DS has "forgotten" some of the settings.
Any suggestions on a possible solution?The issue has been solved.
There was a bad path in $LD_LIBRARY_PATH.
Removed the path and DS started working again. -
Can't connect to local MySQL server through socket '/var/mysql/mysql.sock'
I'm using the pre-installed versions of php and mysql under Mac OS X Server 10.4.4 running on a G4 and am unable to get anything involving mysql to work.
I ssh to the server and enter various commands in Terminal:
on typing "mysql" I get
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2)
and on typing "mysqladmin version" I get
mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2)'
Check that mysqld is running and that the socket: '/var/mysql/mysql.sock' exists!
On typing "sudo mysqld_safe" I get
Starting mysqld daemon with databases from /var/mysql
STOPPING server from pid file /var/mysql/MyServer.local.pid
070722 16:06:05 mysqld ended
/var/mysql/MyServer.local.err contains
070722 16:06:04 mysqld started
070722 16:06:04 [Warning] Setting lowercase_tablenames=2 because file system for /var/mysql/ is case insensitive
070722 16:06:04 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
InnoDB: Restoring possible half-written data pages from the doublewrite
InnoDB: buffer...
070722 16:06:05 InnoDB: Starting log scan based on checkpoint at
InnoDB: log sequence number 0 43634.
/var/mysql has permissions 775.
The line
mysql.default_socket = /var/mysql/mysql.sock
is in /etc/php.ini
whereis mysqladmin ->
/usr/bin/mysqladmin
whereis mysql ->
/usr/bin/mysql
ls /var/mysql ->
MyServer.local.err
ib_logfile1
mysql
ib_logfile0
ibdata1
test
Can't find my.cnf or my.ini anywhere
Can't find mysql.sock anywhere
I'm trying to get a bug database running (mantis) under Mac OS X Server 10.4.4 that I can access from local clients.
I'm trying to follow directions at http://www.mantisbugtracker.com/manual/manual.installation.php
without knowing anything about mysql or php and I'm stuck on step 3:
"Next we will create the necessary database tables and a basic configuration
file."
I get a message saying
"Does administrative user have access to the database? ( Lost connection to MySQL server during query )"
I don't even know if following the mantis directions has resulted in the creation of a database or not. Where would it be?
Thanks for any help.
Intel iMac Mac OS X (10.4.10)I've just done a clean install of OSX Server and added the latest MYSQL packaged installer. Afterwards I found the lock file in /private/tmp/mysql.lock
The easiest way to solve this problem is to create a symbolic link so that the lock file appears to be in right place.
e.g.
cd /var
sudo mkdir mysql <== this assumes the directory is missing
cd mysql
sudo ln -s /private/tmp/mysql.sock mysql.sock
After this msql commands should work fine, and you've not fiddled with the security settings on users/groups.
HTH
Christian -
Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow lepard it work just perfectly... help please.
Reinstall MacFuse with the one from http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg. If that doesn't work, you can use Paragon NTFS for Mac 9.0 which has been designed to work with Lion.
-
Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.
Sorry in my MBP Snow lepard it work.. don't have Lion In MBP
-
hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???
Hey wajahat86!
Here is an article that describes this issue and can help you resolve it:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.
Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.
-
./mysqlshow: Can't connect to local MySQL server through socket '/tmp/mysql
hi all ,I install mysql on Solaris 10 at first it work fine , but after I restart my PC and go back again I got error on
./mysqlshow: Can't connect to local MySQL server through socket '/tmp/mysql
I google , but still not sure how to deal with it
Thank youI've just done a clean install of OSX Server and added the latest MYSQL packaged installer. Afterwards I found the lock file in /private/tmp/mysql.lock
The easiest way to solve this problem is to create a symbolic link so that the lock file appears to be in right place.
e.g.
cd /var
sudo mkdir mysql <== this assumes the directory is missing
cd mysql
sudo ln -s /private/tmp/mysql.sock mysql.sock
After this msql commands should work fine, and you've not fiddled with the security settings on users/groups.
HTH
Christian -
Suddenly I am not able to copy photographs from my apple 5c to laptop , earlier while connecting my phone to laptop through usb , auto run use to open my gallery folder by name DCIM , plz suggest
The following has some information about enabling AutoPlay and alternatives that may help: http://support.apple.com/kb/ht4083
If that doesn't help, the following may: http://support.apple.com/kb/TS3195 -
Connecting a Thunderbolt external HDD to FW800 port
Can I read/write from my late 2009 iMac to a Thunderbolt external HDD by connecting from the FW800 port on the iMac through a Thunderbolt to FW800 adaptor on the external HDD? I have a new MacBook Pro and want to be able to swap an external HDD between them with maximum tranfer speeds on each.
It's for video files for editing depending on which computer I want to work on at the time (and location). It's not a drama, just trying to make it easier for myself and not keep too many big files on the internal drives. I can also put one of my FW800 drives on the MacBook and transfer between the two external drives (or MacBook and FW800) and plug it back on the iMac.
Or I could buy a new iMac when I win the lottery!
Thanks for you help and suggestions anyway. Much appreciated. -
HT1349 very slow external HDD and usb drive connected to Apple Extreme Router
Hello
So I got a western digital USB drive (500gig) and western digital Live 2TB.
I bought a new Apple Extreme router and connected them both.
USB drive and external hdd (WD Live 2TB) very slow when connected to Apple Extreme Router, using Lion 10.7 and updated both firmware for router, western digital and Airport Utility.
Slow means, it takes half an hour to copy 200 Mb of file to the WD Live 2TB, and its connected to my router with a gigabit ethernet cable!
Is someone else having the same problem, I thought even over usb I should get around 2-5mb range.
I am using Macbook Pro and 802.11n with Lion 10.7.2
Please HelpThe USB WD 500 gig is connected to the Airport Extreme using a non-powered USB 2.0 hub, only two things a HP printer and the 500 gig is connected through it. I already formatted it to MAC OS Extended Journalled. ANd I think the speed didnt change.
For the WD 2TB Live I didnt format it to anything, started using it out of the box. I just updated its firmware. I was having the same speed even when I directly connected it to my Mac Book Pro using ethernet gigabit cable.
This WD 2TB Live doesnt have any USB 2.0 or USB 3.0 connectors, just the ethernet cable. I wasnt planning to carry it around. Just wanted to use it as a good ol NAS. So then I saw the fix somewhere and connected to this drive via AFP, afp://MyBookLive._afpovertcp._tcp.local/Public and it become suddenly very fast. Just like how it should be, I easily copied 20 gigs in around 20-25 minutes. (This was dirctly connected to my computer)
So then I thought my problem is solved and disconnected my WD Live and connected it back to the Apple Router again, and the speed became very slow again. Now both the USB 500 gig and this 2TB Live are slow.
Time machine is also very slow.
Thing is I also have a linux and windows machine(in repair, but should be up soon), Since apple is the newest computer I have, I want to make it work on this first. I dont want to use the MACosx journaled on the 2TB right now. Besides formatting the USB 500 gig to this format didnt help with my speed. So the problem can be elsewhere.
- I will try to get a powered USB hub as woodmeister50 suggested.
- I dont know how to connect via iCloud as cigame suggested
Please let me know if you guys have any suggestions. I have tested and returned enough routers in past few weeks. I really want it to work on this combination LionOSX + Airport Extreme + WD Live.
Thanks -
Can't Read/Write to External HDD-Permissions Problem
I have external Seagate HDD, formatted as FAT32, connected to Airport Extreme Base Station. I am unable to Read/Write to this Drive because Finder says I "Don't have permissions" to do so.
Following are details that may be important:
1. I was able to read/write to this drive under Leopard but lost the right under Snow Leopard, after upgrade to SL.
2. In Airport Utility, I set up (2) accounts for the External HDD, "Dad" with "Read/Write" access and "Mom" with "Read" access only. I have Guest Account privileges set to "Read Only". It has been this way for (2) years.
3. Under "Get Info" in Finder, the only account listed is "everyone" with "read" permission only (this is same as Guest Acount in Airport Utility). I am unable to add new accounts because I get error message "The account name is not valid" even though I am using the account name that I am logged in under.
4. I can change the Permissions on the "everyone" account (in Finder) by changing the permissions on the "Guest Account" in Airport Utility. When I do this, "everyone" in Finder now has "read/write" access but my two accounts, "Dad" and "Mom still don't show up in Finder.
5. I also upgraded internal HDD to 1Tb and used Restore from Time Machine. I hhad problems with the restore and did new install of Snow Leopard.
Any ideas on how to make Finder show the two accounts I have set up in Airport Utility?My apologies for bumping this but I still don't have a solution...any help would be greatly appreciated!
Maybe you are looking for
-
Old broken computer (before iTunes Match available)
I have an old HP that no longer works (before iTunes Match). I had uploaded my entire cd collection and it is associated with my itunes account. If I purchase ITunes Match will it bring this data in my library?
-
Create fixed assets from within the transaction for creating the purchase order
Hello All, I have gone through the notes on help.sap.com related to automatic creation of asset master record at the time of creating purchase order. I am not sure how do we achieve this? Link to the notes on help.sap.com SAP Library - Asset Account
-
HT5661 I Bought A Ipad In Dont Know How TO Get I It
i
-
How to install acrobat professional 7 on windows 8
I just purchased a new computer that runs windows 8. I have acrobat professional 7 installed on my old computer, unfortunately I downloaded it directly from Adobe and didn't get a CD, I only have my product registration receipt with a serial number.
-
How to convert table content into html format?
Hi, Experts, How to convert internal data into HTML format is there any function module or piece of code to download content into HTML. Thank u, Shabeer Ahmed.