Can i connect an external 3tb hdd to my mac mini 2011

I think the title discribes my problem prety well, please be sure that your awnsers are tested .

The size of the drive is a non-issue. Connection interface
(Thunderbolt, Firewire, USB) and the manufacturer are the
prime concerns. Some work better than others and some
just don't play nice at all.
This is personal experience only, but I would stay away from
Western Digital external drives. I have never had any good
luck with them over the years. Perhaps they are better now,
but I will never take a chance with them ever again.

Similar Messages

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Shadow30 wrote:
Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
• Only if your video camera supports it. Depending on how your camera works, you may need to add preview software to your Mac to use this feature.
• Alternatively, your camera may also be able to record directly into your Mac while you are monitoring the Mac's display.
• If you are using a consumer camcorder that supports HDMI monitoring, a small HDTV might be an simpler solution than your Mac. For an example of how this is done, see http://youtu.be/GVpSkZD6qE4.
• The retailer who sold you your video camera may have other suggestions.
• If you need more professional results, an external preview monitor will offer more capability on compatible cameras.
Message was edited by: EZ Jim
Mac OSX 10.9.4

External iSight - no sound with Mac mini 2011

Hello,
I'm trying to connect External iSight camera to Mac mini 2011 (using FW400 -> FW800 adapter cable) but I can't get microphone sound to work...
When I open system prefs>sound>input, it shows iSight is connected but system will freeze for a while (like it's looking for iSight) on openning.
When I try open Skype video preferences, it shows me video from iSight with no problem, but sound doesn't work.
Can anyone give me some advice?

You're welcome.
(1) Your new info indicates to me that there is probably something wrong with your cable(s), adapter(s), Mac mini's Firewire, or your external iSight itself.
You can eliminate most of these by troubleshooting with other cables, adapters, Firewire devices, and Macs as suggested in the info from my earlier link.
If no Firewire device you test on your Mac works with any connecting cable, resetting the Mac's Firewire bus may help. Apple's "how-to" article has been archived in this link. (This link may be slow to load.)
If you have trouble displaying the archive page, here is the pertinent extract on how to reset the bus:
... If the issue persists, try these steps:
Shut down the computer.
Disconnect all devices and all other cables, except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
If an individual third-party device leads to the issue, contact the manufacturer for more information and further assistance.
NOTE: Some users who try FW reset forget that "all" cables include the power cable. Disconnecting power is important.
(2) If your troubleshooting shows that your external iSight itself is the problem, you can decide whether you want to have your old serviced. If you do not have access to a local Apple-Authorized Service Provider, you can obtain cost and Apple contact info from http://www.apple.com/support/isight/service/
(3) Rather than spend more money on your old iSight, you may decide to consider a new webcam. A new Mac compatible USB connected cam with a current warranty will be a faster fix, and it may be lower cost. Some examples are at http://mac-compatible-web-cam.com. Moreover, compatible USB connected cams are not subject to all the same conflicts that sometimes effect external iSight.
Unless you already have a separate microphone for your mini, you can decide whether to buy separate mic or look for a new camera that has an inbuilt mic.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Can't connect my external hard drive to my Mac Book Pro. Any thoughts?

I have a 2.0 TB WD Mybookessential as an external hard drive to my Mac Book Pro and I'm getting a "The disk you inserted was not readable by this computer" message every time I try to remount it. Any thoughts?

Thanks for the suggestion, Cattus, it is in fact a formatted disk with a lot of valuable data, so I do not want to reformat the disk.
I followed your advice, however the repair failed because of an "invalid B-tree node size".
This is the log:
2011-12-27 17:03:33 +0000: Error: Filesystem verify or repair failed.2011-12-27 17:03:33 +0000:
2011-12-27 17:03:33 +0000: Disk Utility stopped repairing “disk1s2” because the following error was encountered:
Filesystem verify or repair failed.
2011-12-27 17:03:33 +0000:
2011-12-27 17:06:35 +0000:           Name :           WD My Book 1110 Media
          Type :           Disk
          Partition Map Scheme :           GUID Partition Table
          Disk Identifier :           disk1
          Media Name :           WD My Book 1110 Media
          Media Type :           Generic
          Connection Bus :           USB
          USB Serial Number :           574D415A4131363338333935
          Device Tree :           /PCI0/EHC1@1D,7/@2:0
          Writable :           Yes
          Ejectable :           Yes
          Mac OS 9 Drivers Installed :           No
          Location :           External
          Total Capacity :           1.8 TB (1,999,696,297,984 Bytes)
          S.M.A.R.T. Status :           Not Supported
          Disk Number :           1
          Partition Number :           0
2011-12-27 17:06:35 +0000:
2011-12-27 18:22:01 +0000: Verify and Repair volume “disk1s2”
Starting repair tool: 2011-12-27 18:22:01 +0000
2011-12-27 18:22:01 +0000: Checking Journaled HFS Plus volume.
2011-12-27 18:22:15 +0000: Invalid B-tree node size
2011-12-27 18:22:15 +0000: Volume check failed.
2011-12-27 18:22:15 +0000: Error: Filesystem verify or repair failed.2011-12-27 18:22:15 +0000:
2011-12-27 18:22:15 +0000: Disk Utility stopped repairing “disk1s2” because the following error was encountered:
Filesystem verify or repair failed.
2011-12-27 18:22:15 +0000:
2011-12-27 18:31:57 +0000:           Name :           WD My Book 1110 Media
          Type :           Disk
          Partition Map Scheme :           GUID Partition Table
          Disk Identifier :           disk1
          Media Name :           WD My Book 1110 Media
          Media Type :           Generic
          Connection Bus :           USB
          USB Serial Number :           574D415A4131363338333935
          Device Tree :           /PCI0/EHC1@1D,7/@2:0
          Writable :           Yes
          Ejectable :           Yes
          Mac OS 9 Drivers Installed :           No
          Location :           External
          Total Capacity :           1.8 TB (1,999,696,297,984 Bytes)
          S.M.A.R.T. Status :           Not Supported
          Disk Number :           1
          Partition Number :           0
2011-12-27 18:31:57 +0000:

How to connect an external HD to a 2007 Mac Mini with FireWire

I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
monoprice.com is a good place to find these cheaply and in the length you need.

We can't connect our HP5mp or 6mp to our Mac Mini. Help?

We have Yosemite 10.10.2 and a 25 pin to USB adapter cable from best buy. It worked fine for a while, now nada. ???

Hello:
Try resetting the SMC on the computer. That sometimes solves odd connectivity problems.
Barry

Can I connect a ViewSonicLED 1080p to a 2006 Mac-mini (1.66mgHz)?

I just purchased this vintage Mac-mini to run a legacy stat program but my monitors on-hand are only a year old or so and I believe they are DVI. If I browse the discards closet, am I likely to find a monitor that will work and what should I look for? Or do I just need an adaptor? If I must buy, what do I need?
TIA, Allan

I was an idiot. They both have DVI ports available - I got confused by the adaptor I was using with my late model Powerbook. Working great - THANK YOU.

I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

Drive Partition and Format
1.Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Can i connect 2 external hdd using the thunderbolt to ethernet adapter

can i connect 2 external hdd using the thunderbolt to ethernet adapter

thanks its a wd my book world i just want to directly connect to it i dont want to use it as a network hdd anymote and if i do it will i still be able to use wifi to connect to the internet.
it shows up the the bonjour bookmarks when its connected through my router does that mean it will work?

Can I connect an external hdd to my ipad2?

Can I connect an external HDD to my iPad2?

HyperDrive
http://www.hypershop.com/HyperDrive-iPad-Hard-Drive-s/183.htm
PhotoFast
http://www.photofast.tw/index.asp

Loss 3D graphics and can't connect to external display with NVIDIA card

I note this morning that the graphics in 3D mode of iWork (version 4.1 with system 10.6.8) no longer appears in all software suite. The 2D graphics are displayed perfectly. I also notice I can't connect an external display when I am on NVIDIA card but work well with Intel card.
The 3D graphics are printed but not displayed on the screen (it also appear inthe thumbnail). It seems to be a worry to display.
I posted two screen images showing the problem of 3D in Pages.
Link :
http://www.flickr.com/photos/94407289@N00/6105793305/
and
http://www.flickr.com/photos/94407289@N00/6106332902/
What's going on? and can someone help me because I have a report?

Hello lolthisnameisnttaken,
Based on your post it seems you're having an issue with an external display. The following article may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?

Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not.

Can i connect an external signal generator to the NI7344 to...

Can i connect an external signal generator to the NI7344 to use its
PID characteristics to precisely control the output
I am using the flex motion board (NI7344) to control the force output
of a linear motor. Using contouring and buffer operations i have
successfully created a system which can output a controlled force
which sinusoidal in form. I can achieve a reasonable output for
waveforms of 10Hz, the use of higher frequencies is limited by the
contouring operation ( a frequency of 10 Hz means i can only describe
one period of a sine wave with 10 points ( 10ms between each point =
10Hz). Can i therfore connect an external anologue wave generator to
the NI7344 use and use its PID characteristics to output wave
forms of
higher frequency ??? .....could i output an anolgue wave form from an
E-series DAQ via the RTSI cable to the NI7344 and control this ???.any
ideas or advice would be much appreciated.

Duncan,
You can use a DAQ card to output an analog waveform, but it will be a software call not part of an onboard program. RTSI can be used to pass clocks and trigger signals, so if you want to route a clock signal to do the control you could.
A. Talley

Can I connect an external HD on the time capsule and use it as storage space ?

Hello,
I am thinking about purchasing a time capsule for backing up my data, but I also need storage space for photos and videos, can I connect an external hard drive to the time capsule and use it as storage ? If so, is there any risk of the time machine use the external hd space for backup as well and eat up all the storage ?

can I connect an external hard drive to the time capsule and use it as storage ?
Yes....for storage, as in backup files. But, not recommended for "working" image or media libraries.
If so, is there any risk of the time machine use the external hd space for backup as well and eat up all the storage ?
No, unless you intend to also use the same drive for Time Machine backups.

Can I connect an external DLT Tape drive to the SCSI connector on an E450

Hi... totally new to SPARC. I have inherited an E450. It appears to have the 8 bay option. I have 6 scsi disk drives installed in slots 0 through 5. Internally, there is one ultra scsi controller in slot 2 and two internal cables running from the top of the card, one for each channel. I do have an extra ultra pci scsi card, but when I plugged it into a pci slot, the system would not boot. Bottom line, can I connect an external DLT drive to either Channel A or Channel B at the rear of the Unit and not intefere with other SCSI devices (i.e. the disk drives). Currently, the DLT is set to SCSI ID 8. If this isn't recommended, how do I install the secondary ultra scsi card and have the system recognize it ? Note that the Hard drives have been wiped and I WILL be loading Solaris 10, but have not yet. I wanted to make sure all of the hardware worked first. The second PCI Scsi controller I have is an Adaptec 39160, and I'm assumming it will work IF needed. I'd prefer not to use it if necessary.... ANY HELP is sincerely appreciated ! Thanks, Randy

I suggest you leave the current internal connections just as they are.
You never know when you'll need to add more disks.
That Adaptec card is for PC's.
It won't work in a Sun SPARC-based system.
What sort of SCSI interface is required for that tape device?
Single-Ended? High Voltage Differential? Low Voltage Differential?
You need a card that matches that interface type if you hope it to "drive" the tape.
One quick way to tell, is to examine the chassis of the tape peripheral
and find the small icon that should be at the port for the SCSI cable.
For example, Sun's 375-0005 card is Single-ended and is what you already have inside your E450.
Sun's 375-0006 is a HVD card and would be correct for A1000 and D1000 arrays or L7 or L25 tape libraries.
Sun's 375-3057 card is LVD and would be appropriate for Sun's D2 array.
The manual for that 375-3057 card happens to have pictures of the SCSI icons I just mentioned.
See page 35 in that manual.
http://192.18.109.11/816-2156-11/816-2156-11.pdf
Once you confirm what's needed by the tape peripheral, we may be able to suggest how to connect it properly.

Can i connect an external 3tb hdd to my mac mini 2011

Similar Messages

Maybe you are looking for