Can I connect an external hdd to my ipad2?

Can I connect an external HDD to my iPad2?

HyperDrive
http://www.hypershop.com/HyperDrive-iPad-Hard-Drive-s/183.htm
PhotoFast
http://www.photofast.tw/index.asp

Similar Messages

  • Can i connect 2 external hdd using the thunderbolt to ethernet adapter

    can i connect 2 external hdd using the thunderbolt to ethernet adapter

    thanks its a wd my book world i just want to directly connect to it i dont want to use it as a network hdd anymote and if i do it will i still be able to use wifi to connect to the internet.
    it shows up the the bonjour bookmarks when its connected through my router does that mean it will work?

  • Can I add an external HDD Drive to my Satellite L300-110?

    How can I add an external HDD Drive to my Toshiba Satellite L300-110 laptop and does Toshiba supports adding such type of HDD Drives to the laptops?

    Hello
    External HDD can be connected to every PC or notebook. External HDD will be connected to USB ports. On this picture you can see how it looks like.

  • Why i can't find the external HDD plugged to airport extreme. i already format it with mac OS extended (journaled)

    Why i can't find the external HDD plugged to airport extreme. i already format it with mac OS extended (journaled).
    Does only certain branch of HDD can be connected to aireport extreme?
    I collect some information and i knew i have to partiion the HDD into Mac OS extended (journaled),
    and i did so. Still the usb HDD cannot be found.
    The other question is, can i partition the HDD into two sections, one of it is Mac OS extended(journaled) while the other is Fat32?
    I want to share Fat32 section with another PC with windows system.
    Thanks a lot if you have any suggestions.

    I had tried to set up the connection via usinb a powered usb hub as the bridge between external HDD and the airport extreme. i still cannot found the HDD in the "airport utilities".
    This is my setting.
    1. Set airport extreme  as "sharing-single-ip" mode. The wireless network functions correctly.
    2. Connect external HDD to MBA. Partition it into single-partition with Mac OS extended (journaled).
    3. The HDD can be found if i plugged it directly to my MBA.
    4. Connect a powered usb hub to airport extreme.
    5. Connect external HDD to the powered usb hub.
    6. Open airport utilities.
         a. Select "airport extreme" in the sidebar.
         b. Change the "Disks" sheet.
    7. Cannot find an external Disk
    Is there any problem here?
    Please help me. Thanks a lot!!

  • Loss 3D graphics and can't connect to external display with NVIDIA card

    I note this morning that the graphics in 3D mode of iWork (version 4.1 with system 10.6.8) no longer appears in all software suite. The 2D graphics are displayed perfectly. I also notice I can't connect an external display when I am on NVIDIA card but work well with Intel card.
    The 3D graphics are printed but not displayed on the screen (it also appear inthe thumbnail). It seems to be a worry to display.
    I posted two screen images showing the problem of 3D in Pages.
    Link :
    http://www.flickr.com/photos/94407289@N00/6105793305/
    and
    http://www.flickr.com/photos/94407289@N00/6106332902/
    What's going on? and can someone help me because I have a report?

    Hello lolthisnameisnttaken,
    Based on your post it seems you're having an issue with an external display. The following article may help you find a solution:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

    can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?  in apple tv 3 and 2?
    That  i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive,  i dont want to see then  whit the streaming and icloud, or used my  laptop o pc for access de movies and stuff.
    i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
    if i can´t  connect a external hard  drive, wich others media players divices you know that can see itunes movies?
    ¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
    lo que no quiero es usar  la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
    y de no poderse conectar  que otros dispositivos media pleyer conoces para ver peliculas de itunes  en la tv?

    Welcome to the Apple Community.
    can i connect a external hard drive to apple tv 3 generation
    Unfortunately not.

  • Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

    Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

    Shadow30 wrote:
    Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
    • Only if your video camera supports it.  Depending on how your camera works, you may need to add preview software to your Mac to use this feature.
    • Alternatively, your camera may also be able to record directly into your Mac while you are monitoring the Mac's display.
    • If you are using a consumer camcorder that supports HDMI monitoring, a small HDTV might be an simpler solution than your Mac.  For an example of how this is done, see http://youtu.be/GVpSkZD6qE4.
    • The retailer who sold you your video camera may have other suggestions.
    • If you need more professional results, an external preview monitor will offer more capability on compatible cameras.
    Message was edited by: EZ Jim
    Mac OSX 10.9.4

  • Can i connect an external signal generator to the NI7344 to...

    Can i connect an external signal generator to the NI7344 to use its
    PID characteristics to precisely control the output
    I am using the flex motion board (NI7344) to control the force output
    of a linear motor. Using contouring and buffer operations i have
    successfully created a system which can output a controlled force
    which sinusoidal in form. I can achieve a reasonable output for
    waveforms of 10Hz, the use of higher frequencies is limited by the
    contouring operation ( a frequency of 10 Hz means i can only describe
    one period of a sine wave with 10 points ( 10ms between each point =
    10Hz). Can i therfore connect an external anologue wave generator to
    the NI7344 use and use its PID characteristics to output wave
    forms of
    higher frequency ??? .....could i output an anolgue wave form from an
    E-series DAQ via the RTSI cable to the NI7344 and control this ???.any
    ideas or advice would be much appreciated.

    Duncan,
    You can use a DAQ card to output an analog waveform, but it will be a software call not part of an onboard program. RTSI can be used to pass clocks and trigger signals, so if you want to route a clock signal to do the control you could.
    A. Talley

  • Can I connect an external HD on the time capsule and use it as storage space ?

    Hello,
    I am thinking about purchasing a time capsule for backing up my data, but I also need storage space for photos and videos, can I connect an external hard drive to the time capsule and use it as storage ? If so, is there any risk of the time machine use the external hd space for backup as well and eat up all the storage ?

    can I connect an external hard drive to the time capsule and use it as storage ?
    Yes....for storage, as in backup files.  But, not recommended for "working" image or media libraries.
    If so, is there any risk of the time machine use the external hd space for backup as well and eat up all the storage ?
    No, unless you intend to also use the same drive for Time Machine backups.

  • Can I connect an external DLT Tape drive to the SCSI connector on an E450

    Hi... totally new to SPARC. I have inherited an E450. It appears to have the 8 bay option. I have 6 scsi disk drives installed in slots 0 through 5. Internally, there is one ultra scsi controller in slot 2 and two internal cables running from the top of the card, one for each channel. I do have an extra ultra pci scsi card, but when I plugged it into a pci slot, the system would not boot. Bottom line, can I connect an external DLT drive to either Channel A or Channel B at the rear of the Unit and not intefere with other SCSI devices (i.e. the disk drives). Currently, the DLT is set to SCSI ID 8. If this isn't recommended, how do I install the secondary ultra scsi card and have the system recognize it ? Note that the Hard drives have been wiped and I WILL be loading Solaris 10, but have not yet. I wanted to make sure all of the hardware worked first. The second PCI Scsi controller I have is an Adaptec 39160, and I'm assumming it will work IF needed. I'd prefer not to use it if necessary.... ANY HELP is sincerely appreciated ! Thanks, Randy

    I suggest you leave the current internal connections just as they are.
    You never know when you'll need to add more disks.
    That Adaptec card is for PC's.
    It won't work in a Sun SPARC-based system.
    What sort of SCSI interface is required for that tape device?
    Single-Ended? High Voltage Differential? Low Voltage Differential?
    You need a card that matches that interface type if you hope it to "drive" the tape.
    One quick way to tell, is to examine the chassis of the tape peripheral
    and find the small icon that should be at the port for the SCSI cable.
    For example, Sun's 375-0005 card is Single-ended and is what you already have inside your E450.
    Sun's 375-0006 is a HVD card and would be correct for A1000 and D1000 arrays or L7 or L25 tape libraries.
    Sun's 375-3057 card is LVD and would be appropriate for Sun's D2 array.
    The manual for that 375-3057 card happens to have pictures of the SCSI icons I just mentioned.
    See page 35 in that manual.
    http://192.18.109.11/816-2156-11/816-2156-11.pdf
    Once you confirm what's needed by the tape peripheral, we may be able to suggest how to connect it properly.

  • Can i connect an external hard drive?

    Can I connect an external hard drive to the ipad? How about the new one or the iPad 2?  I would like to be able to watch movies stored on the external drive.

    Ordinarily no but I seem to recall someone once describing such a device.  Mr. Google is your friend.

  • Can I connect an external hard drive to Time Capsule for off site back up?

    I like having a copy of everything at another site in case of a house fire. Can I connect an external hard drive to Time Capsule to make a duplicate of what is on Time Capsule? I would store that hard drive at work and bring it home monthly or something to back up Time Capsule. Thanks!

    Can I connect an external hard drive to Time Capsule to make a duplicate of what is on Time Capsule?
    That is exactly what the Archive function on the Time Capsule is for. Connect a USB drive and click Archive, and a mirror image of your Time Capsule will be copied over to the USB drive.  It's a slow process that will take 4-8 hours depending on how much data is on the Time Capsule, so best to start things late at night and let them run overnight.
    Another option would be to use a commercial application like Carbon Copy Cloner to keep your backup.  The advantage to this approach is that once the first "master" backup is done, the application will only back up the changes on the Time Capsule that have occurred since the last backup. So, subsequent backups will be much faster, probably only taking about 10-15 minutes.

  • Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

    Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

    If this hard drive is part of a NAS device, then yes it should be accessable from either a Mac or PC while connected to the AirPort Extreme Base Station (AEBS) by Ethernet.

  • Can't connect to external network

    Switched from a Netgear router to a Cisco E2500 and now my Samsung blue ray won't connect to internet.
    It says physical connection established but can't connect to external network.
         Thank you for any help in this matter

    Before I suggest you for any kind of troubleshooting steps, I would like to ask few questions. Let me know the name of the ISP. Leaving Samsung TV, do you have any computer which can access the internet wired and wireless? If yes, what IP address do you get in the computers?

  • HT4108 Can I connect my external apple DVD player to play movies on my ipad 3?

    Can I connect my external apple DVD player to play movies on my ipad 3?

    I am afraid you cannot connect the external DVD player to the iPad. It won't work.

Maybe you are looking for

  • CMD_EI_API and ENQUEUE_EXKNA1 fail to block customer

    <p>Dear SAP gurus and fellow programmers,</p> <p>I have been exploring how to block customers by examining the code that is executed in transaction XD02. I have been able to block and unblock customers using an ABAP objects class, CMD_EI_API, but onl

  • Merging folders and files in the Mountain Lion

    After updated from Lion to Mountain Lion I can`t to merge folders using the key option/alt. I lost many important files doing this process. What the best solution to resolve this problem? I`m tired to find a solution for do it.

  • Free goods combination experts - business question!

    Hi gurus and experts can any body give me idea how to deal with free goods combinations( i have to deal with lot of combinations)  with the regular products. currently we are using r/3.not reatail . so for combiation of free goods(lot of combinations

  • Printing books to PDF

    I make InDesign CS3 books because it is more convenient and faster to create PDF files from a book than from indidivual documents. Is it possible in the Export Adobe PDF dialog, under Marks and Bleeds, to add Page Information to each individual docum

  • Converting MS Publisher files to Mac Word?

    How do I convert Windows 7, MS Publisher documents, to MacBook MS Office document?