Can I connect every USB-Audiointerface with Logic Pro?

Hello there,
please forgive me, if my english isn't so well.
So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
But - Can I simply connect a USB-Audiointerface with Logic Pro?
So, hope you understand me,
Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

Similar Messages

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Using 2 or more USB instruments with Logic Pro

I recently purchased a Korg M3 (which is great). I'm considering adding a Motif XS rack.. My question, are any Logic Users out there using Logic Pro with two or more USB instruments connected?
Are there any issues with that (other than assigning to different MIDI channels)? Does USB bog down when there is too much data?

I'm only using these three lines of code. If they don't work, neither will any more lines.
I discovered the issue thought. If I read two different fields from the same user-defined table then it works. If I read from two different user-defined tables I get the error. Apparently B1 can't handle parameters being set from two different ud tables.
This works:
DECLARE @S2 nvarchar(30), @S3 nvarchar(30)
SELECT @S2 = (SELECT T0.U_Country FROM [dbo].[@COUNTRIES] T0 WHERE T0.U_Country = '[%2]')
SELECT @S3 = (SELECT T0.U_CCode FROM [dbo].[@COUNTRIES] T0 WHERE T0.U_CCode = '[%3]')
While this does not:
DECLARE @S2 nvarchar(30), @S3 nvarchar(30)
SELECT @S2 = (SELECT T0.U_Country FROM [dbo].[@COUNTRIES] T0 WHERE T0.U_Country = '[%2]')
SELECT @S3 = (SELECT T0.U_AdCode FROM [dbo].[@BPGROUPS] T0 WHERE T0.U_AdCode = '[%3]')
Alan

Can I use a US-122MKII with Logic Pro x?

Hi All!
This is my first time on here so nice to meet you
My question is: Can I use the TASCAM US-122MKII with the new Logic Pro x on an iMac?
I've been using the TASCAM with my old Powerbook running Logic Pro 9 and it worked fine. Now however I can't get Logic Pro x to find it. I've tried scanning for it in the external interfaces section but it wasnt found. The iMac itself does find it and it appears in the system preferences sound section as an input. I've downloaded the latest software from the TASCAM website also.
I'm not very techy so may just not know how to do it.
Any help greatly appreciated
Brad

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Can't connect Yamaha P-35 to Logic Pro X

Hello.
I am running an iMac with OS X Mavericks (10.9.2), 2.9 GHz Intel Core i5 Processor with 8GB 1600 MHz DDR3 memory.
I am using Logic Pro X and am trying to get my Yamaha P-35 Digital Piano to act as a Midi controller. I have a USB to MIDI adapter cable, consisting of both an In and Out 5-pin Midi cable running through to a USB plug. I have my USB plugged into my iMac and the MIDI plugs in my piano. There are 3 lights on the adapter cable, Midi, USB and one with a musical note above. Only the USB light is lit up.
My aim to use the piano as a controller, to play Logic Software instruments with but Logic seems to not be aware of the piano being plugged in. I am looked on Yamaha's drivers page also and there is not one for this device, only older models.
Any help would be appreciated.

Try reversing the in and out on the keyboard end.... if you havent tried that already.... as these cheap cables sometimes are mislabelled... and given how you are using the keyboard, you only need the out from the keyboard going to the in on the cable...
Other than that, yes, almost all of the cheap midi usb cables have the same issues.. Some work... some work some of the time... and more often some don't... not reliably at least..even if they are the same brand/model... There is no way to know for sure until you try them out.
The real solution is to get yourself a decent midi interface or better still, an Audio/Midi interface like a Motu for example... which has stable, reliable drivers... and a build quality using decent components. Using a cheap interface or cable with a Mac... is akin to putting $50 tires on a $300k Ferrari... They kind of work but the end result isn't real driving..... and you are degrading the Ferrari's performance down to that of a 15K family sedan

Can't connect to netgear wifi with macbook pro

I have a Netgear N900 router and although I can find the signal I cannot connect to the wifi. Each time I clicked on it, it would fail to connect and say to move closer to the router. However the router has already been upgraded to make the signal strong enough to reach my room. I have tried restarting the router and it has not worked. I have gone into the router through my browser and reserved an IP address and changed my network settings on my computer to "using DHCP with manual address" and entered the reserved IP address. I restarted my computer but now my macbook pro says that it is connected but I can't connect to the internet when i open a browser. I'm not sure if I'm not reserving the IP address correctly or if there is another solution to this problem. If anyone has encountered this problem and found a solution that would be amazing. I have been trying for a month now to fix this. Thanks!

From the menu bar, select
 ▹ System Preferences... ▹ Network ▹ Advanced ▹ TCP/IP
What values are shown for the following?
Configure IPv4
IPv4 Address
Subnet Mask
Router

Can i use my digidesign 002 with logic pro 9

Hi does anyone know if i can use a 002 to interface with
with logic

You will have to check with AVID/Digidesign to see if they have Core Audio drivers available for Mountain Lion.
Logic is Core Audio compatible so an interface has to have Core Audio drivers that are compatible with the operating system they wish to use it on.

How can i use my axiom 49 with logic pro X

Hey..
So I've been using logic to make music for a while now and just recently obtained an axiom 49 controller to open my possibilities. The only thing is, I have no idea exactly how to make it work the way I expected it to. All that comes by default is that my keybord works with all the types of preloaded instruments, but none of the faders or knobs work.. Is there something else i need to install or is it in the settings?
Highly appreciate any help,
Danny

Ok, I'll ask again... have you downloaded and installed the software that enables the keyboard to become a controller for all the functions you've described?
You have to be an active participant in getting things to work correctly.
Have you read the M-Audio manual that tells you how to do this?
Here, I just went to the M-Audio site.
http://www.m-audio.com/index.php?do=support&tab=driver&serie_ID=3&PID=65526d20ff 75725a01dcf4dfab822e9d#tabs
It looks like it's called Direct Link, I imagine it comes with directions how to install the software and get it working with the keyboard. It's for Logic 9 but I suspect it will work with Logic X

Can you record a skype conversation with logic pro 9? if so how?, can you record a skype conversation with logic pro 9? if so how?

I am doing a podcast and very new with logic as a recording program is there a way to record through logic a skype or phone call?

Search Google using:
record skype mac
Using Logic for this is way overkill, there's several free apps that could've done the job just as well.
Good luck.

Can i use my snowball usb mic with Logic or Pro Tools???

Can i use my snowball usb mic with Logic or Pro Tools???

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

Can i connect my nokia 5233 with a usb keyboard?

can i connect my usb key board with my nokia 5233? Is there any way to attach a external keyboard with my nokia5233, i know the the bluetooth keyboard,but not that, i want directly.

Amartya wrote:
can i connect my usb key board with my nokia 5233? Is there any way to attach a external keyboard with my nokia5233, i know the the bluetooth keyboard,but not that, i want directly.
No.
Happy to have helped forum with a Support Ratio = 42.5

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

How to connect a USB-6008 with lookout6.0?

hi >>>
I am a student in electrical and computer department, i want to ask about
How to connect a USB-6008 with lookout6.0 if thats possible?Could you
provide some help?
Regards
Manal

Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

Can I connect every USB-Audiointerface with Logic Pro?

Similar Messages

Maybe you are looking for