Can I connect extra speakers to my all-in-one ?

Can I connect extra speakers  to my all-in-one ? if so, how ?

Malolo wrote:
Can I connect extra speakers  to my all-in-one ? if so, how ?
Hi,
Sorry, don't know ! What is it ? what is its Operating system ? Please read the following article then post back:
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/Advice-for-asking-the-quot-V...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • I can't get my bluetooth on my ipad to connect to my hp c5580 all in one printer bluetooth

    I can't get my bluetooth on my ipad to connect o my hp c5580 all in one printer bluetooth

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How do I connect my HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection

    I have a 
    HP Deskjet 1050 All-in-One Printer - J410a
    I am connected to a computer but would also like to connect it to my laptop wirelessly.
    Can't do it.  Must be doing something wrong.  Need help thanks.

    Hi @5468,
    Welcome to the HP Forums!
    I noticed that you are wondering how to connect your HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection. I am happy to look into this for you!  
    According to your printer's specifications and the Setup Poster, this printer can only be connected to a computer via a USB 2.0 printer cable connection. This printer does not have wireless capabilities.
    Hope this answers your question, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • No sound in speakers in my all in one omni 27

    No sound in speakers in my all in one omni 27. Ran all diagnostics, update driver, nothig helped!!!
    Please help!!!

    It could be a hardware issue. You can confirm this by doing an HP Recovery back to factory defaults.
    Performing an HP System Recovery (Windows 7)
    If that fails you can contact support for your repair options: In North America, call (800)-474-6836 outside of North America find your support number here HP Technical Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • With three browsers on three computers, how can you maintain them individually if they all match one another? Which is the dominant browser?

    With three browsers on three computers, how can you maintain them individually if they all match one another? Which is the dominant browser?
    For example, how can I have one addon disabled or removed on one computer's browser without is affecting the other computers?

    If you are referring to the Firefox Sync service, they are all equal. When data is changed on one computer, the changes will be sent to the other computers once Firefox is opened the next time.
    If you don't one type of data synchronized on a particular computer, then don't select that type of data for being synchronized.

  • How can I configure an airport express to connect extra speakers to those on my Apple TV?

    Hi,
    I'm using a net gear router to play music on speakers connected to my tv via Apple TV. I want to set up another set of speakers upstairs mot play the same music throat the house. Can I connect another set of speakers to the airport express and have all speakers running in harmony? any advice gratefully received!
    Cheers, Dean

    You can connect (up to five practically) AirPlay Speakers and stream to them simultaneously from a single iTunes host. Your Apple TV would be one of those AirPlay Speakers.
    Each additional AirPlay Speaker would be configured to join the existing wireless network. For additional details on configuring an AirPort Express for AirPlay, please see the following Apple Support article.

  • My PC can't stand the connection to HP Officejet 4630 all-in-one printer

    Hi everybody,
    I got a HP Officejet 4630 all-in-one printer, i manadge to connect it to the network. I select a static IP and i can reach the printer through the browser.
    I can add the printer to the PC, the system can find it after few second od scannig, and than i can print a test page.
    The problem is that if I reboot the PC or the printer, or both, i can' print no more.
    The icon of the printer in the "device and printer panel" is blurred with the green thick, but i can still reach the print through the browser and i can print with the ePrint.
    If I use the "problem solving" service of Windows, it can't find any problem. But i can't still print.
    I don't know what to do, it seems a problem of the computer (i even tryed to turn off the firewall but it doesn't change anything)
    Is there someone that could help me?
    Thank you so much

    Hi @poporni,
    Welcome to the HP Forums!
    I noticed that your HP Officejet 4630 keeps losing the wireless connection on Windows 7. I am happy to look into this connection issue for you!
    Please, take a look through this guide, Printer Does Not Maintain Wireless Connection.
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend, our HP Wireless Printing Center - Troubleshooting Issues website.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can't connect to iTunes Store from all devices

    I can't connect to iTunes Store with my apple ID in my mac.. Have tried this with my iphone 5 and ipad mini also with the same result. Can anybody help me?

    There is an issue affecting some users (I also have the problem) according to this page : https://www.apple.com/support/systemstatus/
    You could occasionally check that page to see when it's fixed

  • Can't setup wireless printing : HP4385 Photosmart All-In-One Printer / Linksys Router/Mac OS 10.5

    I am attempting to set up my printer to operate wirelessly. I have the computer and printer connected via USB for the setup.
    I have :
    PRINTER :  HP All In One Photosmart C4385 
    ROUTER :  Linksys wireless B   (WPA security)
    COMPUTER :  Macbook Mac OS 10.5.8  notebook.
    I've downloaded the correct HP software.  
    On the printer, the wireless radio is set to  "on"
    PROBLEM : Using the HP Setup Assistant,  I select my Wi-Fi network, and get an error message " the selected Wi-Fi network is not within reach of the device"
    The printer and router are in the same room with nothing blocking them.
      Print out of HP Network Configuration Page :
    General Information
    Network Status : Offline
    Active Connection Type : None
    URL :  http://0.0.0.0.0
    Firmware Revision :  WPxxFN0723AR
    Hostname : HP8766D2
    Serial Number:  CN7CDD51P80509
    Admin Password : Not Set
    802.11 Wireless
    Hardware Address (Mac) : 001e0b8766d2
    Status : Disconnected
    mDNS
    Status : Enabled
    Service Name : Photosmart C4380 series [8766D2]
    SLP
    Status : Enabled
    Any help greatly appreciated !

    Print a WIreless Network Test from the front of the printer.  It will self-test the printer's radio.
    Can you give me the exact model number of your router?  If it is a 802.11b router, it may be time for a new one.  If it is, are you sure you are using WPA and not WEP?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • FAX button not working on HP Connect site for HP Officejet All-in-One 4630

    I can send a fax using the printer, but cannot send a fax from the computer using the HP Connect page. It was working before. I can use fax set up wizard, manage fax settings but not send a fax button. It stopped working all of a sudden. EHW

    Hi EHW,
    Welcome back to the HP Support Forums! I see you are able to send a fax from the front panel of your HP Officejet 4630, but when you attempt to use the HP Printer Assistant to send a fax the fax option is now greyed out.
    I would first like you to make sure the printer's Firmware is up to date, please click on the link below to get started:
    HP Officejet 4630 e-All-in-One Printer series Firmware Update
    Once you have updated the Firmware, try and open up the HP Printer Assistant, are you now able to choose the Fax option?
    If not, continue here and run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Are you able to fax from the HP Printer Assistant, if you still have problems leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. Have you made any changes or updates to the computer?
    Please let me know the results, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Setup can't detect network printer Photosmart C7250 all in one

    I volunteer for our local historical society.  The person who did a lot of the computer maintenance work is not active at this time so I’ve begun to look at things. 
    There is a Gateway PC running Windows 7 64 bit home premium, a Sony Vio laptop running Vista 32 bit  home premium, an HP Laser printer and (of most importance here) an HP Photosmart C7250 All in one printer.
    Internet connectivity is via a dsl line with a combination modem/router.  I think the modem/router is a Westell or an Actiontec through Frontier Communications (formerly Verizon in this area)  but I’m not sure and I’m not at the museum now.
    A couple of weeks ago I was able to connect the laptop to the network via wifi.  My next step is to connect the laptop wirelessly to the printer so we can print wirelessly over the network.  The printer was originally set up through a usb connection so I changed it to a wired Ethernet connection.  The PC now successfully prints to the printer over the network.  I downloaded the software and drivers directly to the laptop from the HP site and began the installation.  When it got to the point of finding the network printer the software couldn’t detect it.  I then put in the ip address for the printer (from the network info printed out from the printer) and it still couldn’t find it.
    This same situation occurred when I tried to set it up on my personal laptop (Win7 , 64 bit) as well.  Setup couldn’t detect the network printer, even after searching for the network ip address. 
    Since the printer is connected to the network (router) via an Ethernet cable, I don’t have the wifi radio turned on in the printer.  This shouldn’t make any difference.   
    I’ve searched the forums and haven’t seen anything that is like my issue.
    I don’t what else to do.  Hopefully someone will give me some advice on what to do next. 

    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    If the network has Wireless Isolation turned on it will prevent wired devices from seeing wireless devices.  Do you have access to the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Could I connect a monitor to my all in one IMAC?

    the graphics card crashed and fix it cost me 550GBP. Sadly at this moment I can't afford this amount of money and I wonder if for a couple of months I can connect a monitor. I'll appreciate some advice

    I bought this Mac 3 years ago is 21.5 screen all in one. I was willing to pay 400 GBP to fix it, but in apple store was almost 500 GBP exc. vat and 90 days warranty. I dont think is a worth to do it and I will buy a new one but in December. I will like to be able to open it and see what is inside, but I can't do it!!!!!!!!!! In the past I was used to replace things in PC but I've never touched a MAC. By the way, I'll try to find someone to do this for me because I have all my memories and jobs . Thank you so much for your help, you are a star!!!!!!!!! are you spanish?
    I'm from Barcelona!!!!!!!!!!!!! living in England but Spanish!!!!!!!!

  • Dual Screens - can you do it on the Essential All in One?

    I have a standard Essential all in one.  
    I thought it would be handy to run dual screens for something I am working on but cannot see a way to do this on the machine. 
    Is it possible? 
    Thanks
    AMC 

    hi
    Can you share what system are you using and what type of connection is has,
     This is you computer model ex. Ideapad g500 y510P etc.. you can find it on your system stickers
    Also share what TV/Display you're using.
        This is the model name of your external Display, the external monitor you are using
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Can't detect or print to C8189A All-in-One-Printer on a wired LAN

    Computers on my home wired LAN repeatedly but intermittently stop being able to print to the HP C8189A printer attached via wired LAN connection.  I began trouble shooting last night and uninstalled all HP software to start afresh.
    I cannot print to my HP C8189A all-in-one printer conected to a wired network from my desktop PC running Windows XP with SP3.  I can see the printer has pulled an IP from the router by looking at the router's attached client list.  I can ping the printer at its assigned LAN IP address.
    My desktop pc and the C8189A printer share a common DLINK Gigabit Switch which connects wired wired LAN to the DLINK router.
    I uninstalled and reinstalled all HP software but during the HP Solutions Center software reinstall it could not find the PRINTER on the lan, even when inserting the Printer's assigned IP address.
    When checking the network configuration from the printer, it confirms that it is has the correct IP address, but the HP software still cannot detect it.  I have pulled the power connector from the back of the power a couple times to RESET the printer.  This usually corrects what is now a terribly frustrating problem accessing the printer.
    Additional factoids: 1) other PCs can print to this printer, 2) SPYBOT Search & Destroy is running on my PC and popped some registry change windows during the install.
    I'm running out of ideas - any suggestions please?
    Message Edited by VARocketry on 01-09-2009 11:54 AM

    Hmmm ... this is interesting.  In review:
    You can print intermittently from your XP SP3 box to the OJP L7680.
    Disabling the SW firewall (Norton/Symantec, Zonealarm, McAfee, etc) on the SP3 PC doesn't help.
    Other computers on your network have no problems printing to the OJP L7680.
    You are running a wired (Ethernet) network.
    Did I get this right?  I'd like to ask a few more questions:
    What are the other types of computers on your network and what firewall do they run?
    The next time your XP SP3 computer has trouble printing to the OJP L7680, try to access the printer's internal web page.
    What are the IP addresses of the other devices on your network?  By chance, is there a duplicate address on your network?
    Finally, you can try adding the print driver manually to see if we can get you printing.  This is the sequence for XP: 
    Click "Start" button --> Printers and Faxes.
    Under Printer Tasks, click "Add Printer".
    Click "Next" button on the first Add Printer Wizard window.
    If the option for Local or Network printer appears, select "Local printer attached to this computer" and deselect  the "Automatically detect and install My Plug and play  printer" option.  Click "Next".
    Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port"  and click "Next" button.
    In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is  turned on and configured. Click "Next" button.
    Under "Add Standard TCP/IP Printer Port" enter the printer's host name  (that is the hostname of printer that printed in network configuration page)
    under "Additional Port Information" select "Standard". Click Next, and then click Finish.
    Now, select HP from the list of manufacturers, select your printer from  the list of Printer models  and click 'Next' button.
    The Printer name will be highlighted on the next window.
    Click "Next" button.
    It ask for the Printer name -- leave it as is.
    Select "Yes" option for making the printer default.
    Click "Next" button.
    The Printer Sharing dialog box will open.
    Click "Next" button.
    The Print Test Page box appears.
    Select "Yes" option to print a test page.
    Print Test Page.
    Completing the Add Printer Wizard box appears.
    Click "Finish" button and wait for the files to copy 
    This should work to get you a print queue for your XP box.
    Regards / Jim B
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Maybe you are looking for