Can I connect keyboard/mouse to shutdown Win2K when I dod not connect it during bootup?

I would like to bootup even keyboard/mouse is NOT connected, but the problem is I cannot use keyboard after then. Can I connect and use keyboard/mouse when I did not connect them during bootup?

When using Windows 2000 with default startup options, it will always check if a keyboard and mouse are connected or not. If it cannot find either of them it will give you a warning.
If you boot the computer without a keyboard nor a mouse connected to it, it will not load the necessary drivers and you will not be able to use either one of them after boot up. However, you can boot with a mouse and keyboard connected, and then remove them. This way you will be able to re-connect and use them again later on.
You could also use a keyboard/mouse emulator to start up your system. You will have to check with the provider of the emulator if this solution allows you to connect and use a normal mouse and keyboard after boot up.
You could also try to find out how to c
hange registry entries of Windows 2000, so it boots up without checking for neither mouse nor keyboard, and logs in automatically. This way you would not need a keyboard/mouse emulator, and you could try using a USB keyboard and a USB mouse. Windows 2000 offers native support for USB devices and they are hot swappable.
For this last option, keep in mind that only PXI-8176 and PXI-8175 controllers have 2 USB ports. PXI-8174 controllers have only one USB port, as some other older controllers, such us PXI-8170 and PXI-8156B.
Hope this helps,
Claudia Lorente
Applications Engineer
National Instruments

Similar Messages

  • HT1349 The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home  on my wi Fi is the only t

    The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home  on my wi Fi is the only time it works correct. Bill. [email protected]  708 752  3667 

    http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

  • Can I restore my system from install discs when DVD is not working?

    Can I restore my system from install discs when DVD is not working?
    There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
    Is my only option to open up the iMac and get the jammed disc out?
    Thanks

    Problem solved - I posted on the general Tiger Discussions as well.
    I had the wrong machine started in Target Firewire mode.
    http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0

  • HT2589 how can i skip the viewing on my account when i has not use my apple id in i tunes stores?

    How can i skip the viewing on my account when i has not use my apple id? The main problem is i do not have a credit card... so what should i do?

    You can't, you will need to enter a credit card number before you can use that account in the store.
    There are instructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534

  • Can you disable keyboard/mouse buffer

    Is there any way to disable entering keyboard/mouse events?
    There are very fast clickers around, and I just actually want to make buffer size to zero, so any unwanted extra key/mouse clicks would be ignored .. before the application is ready to receive just the wanted input.
    Just a fine summer here..

    .. As an old Foxpro programmer, I am seeking something like 'Set typeahead to 0'!

  • How can I prevent Magic Mouse from scrolling horizontally when I don't want it to?

    I recently purchased a Magic Mouse to go with OS 10.6 Snow Leopard. It's a great mouse but it causes 2 problems:
    If I leave it on "Scroll with interia" in System Preferences/Mouse, it scrolls horizontally when I don't want it to.  Since I mostly work in Word documents, I often lose my place in the document this way. On the other hand, checking "Scroll without inertia" makes vertical scrolling, which I do all the time, a lot harder.
    The mouse seems to cause what I think of as "fractures" in Word documents--words and parts of sentences will disappear or get crunched together , then reappear when I select the place where they vanished.  They also reappear if I scroll vertically to get the problem area off the screen and then return to it. This wastes a lot of time at best; at worst, I'm afraid I'll lose work.  The problem occurred once in a while with a Logitech bluetooth mouse I was using, but not as bad and not all the time.
    I love the mouse's ergonomics and would like to keep it, but if I can't solve this problem, I'll have to return it.  Would be very, very grateful for any tips!  Thanks.

    Always nervous about recommending sites I have no personal experience of.  On the plus side it doesn't relate to any of the bad sites I am familiar with and it appears to be the developer's site ... but there is no contact point for you to ask questions.  You said in your initial post it was to go with Snow Leopard but this version says it is meant for 10.7 and above.   Did you notice that?   I also notice several other references to Word and mouse and one person found the solution lay in the updating of word 2011 to its highest level.   I can offer no more.

  • Can I send keyboard/mouse commands from a VI to an external application?

    I am launching an external application (BeamScan.exe by Photon) in Windows 95 from a LabVIEW 5.1 VI using Exec. I want to be able to configure the external application from its own menu bar, sending key commands or mouse clicks from the VI. I need to do it this way because the external application has only limited ActiveX capabilities which do not include the menu options I want to control.
    Is it possible to send keystrokes or mouse clicks through Windows 95 to the other application?

    Steve_rvk wrote:
    > I am launching an external application (BeamScan.exe by Photon) in
    > Windows 95 from a LabVIEW 5.1 VI using Exec. I want to be able to
    > configure the external application from its own menu bar, sending key
    > commands or mouse clicks from the VI. I need to do it this way
    > because the external application has only limited ActiveX capabilities
    > which do not include the menu options I want to control.
    >
    > Is it possible to send keystrokes or mouse clicks through Windows 95
    > to the other application?
    Download "Simulate Click" and "Simulate Key Event" from my web site.
    It's on G Toolbox page.
    George Zou
    http://gtoolbox.yeah.net
    http://go5.163.com/~georgezou

  • Keyboard & mouse doesn't work when restarting from battery dying.

    When my battery dies, I go to put it back on the charger. Once it is done loading the main log on screen, neither the keyboard or mouse won't work for a good minute or so. Once the screen turns black, then comes back, it works. Any ideas? Thanks!

    Try plug an usb keyboard and a usb mouse. If the problem persists, you may reset the SMC and nvidia/PRAM memory.
    If that doesn't do it, run the Apple Hardware Test .
    Cheers,

  • My iphone 4s says it can't sync my itunes because its full when its actually not

    hi,  i am trying to sync my iphone 4s to my itunes (essentially new phone, new computer, old library) (my phone was synced to my old computer before this), but it won't work because it says it is too full.  The bar along the bottom of itunes and the 'properties' section on my computer each say i have at least 14GB left on a 32GB phone, and my itunes library is about 16GB, therefore i should have enough room to sync to the library on this computer.  i have even tried just adding a few artists but still it says it is too full with roughly the same amount of mb apparently required.  i have allowed access to sync to this computer etc, i have removed all duplicates of songs (a leftover effect from syncing it to my old computer first i think), and the 'other' section is displaying as only small so shouldn't be clogging it up.
    So i'm at a bit of a loss on how to get my phone synced (and put my new albumns on there).
    Also, on what i think is a slightly seperate issue - when i originally synced to my old computer's itunes library it would show all my songs on my iphone, but over about 1/3 of them were greyed out and unplayable on my phone but not my computer?  not sure if these are related?
    If you can answer either or both of the questions i would be pretty blummin chuffed!
    Thanks muchly!

    Well i seem to have sorted this myself - i reset my phone back to its original settings and then used the back up on my computer to restore everything.  so far all my songs appear to be there, i'm just chasing up where my Apps have gone!

  • Why can't Verizon stop charging me for Navigator when it has not been used?

    I have been going to your store in Bend, OR every month due to your failure to correct a charge for over a year. It is $9.99 for VZNavigator on xxx-xxx-xxxx. I would like written proof of these charges & usage because when I take action, I would like to show the total overcharge. I have the Share Everything Plan & have been with Verizon when it was AirTouch and now I am wondering how many other charges have been slipped into my bill. I would like a rapid response as I have been waiting patiently for many months without resolve.
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    Verizon Wireless Customer Support wrote:
        Having unexpected charges on your bill is never a good thing hd4ever. If you have access to My Verizon online, you may view account charges for the past 12 months. I understand you have been billed for a VZ Navigator subscription. Which make and model phone are you using? With certain model devices, it is required that you uninstall the application from the phone itself. To view a detailed bill of charges online via My Verizon click http://bit.ly/xB4iTc
    In addition, it is recommended that you take your personal account information from the public forum. If you would like for us to review your account. Simply follow us and send us a direct message.
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT
    michelleh_vzw
    The personal information was already removed from the post by the Moderators. I really wish your system to view questions always reflected the most current version of the post instead of the original message that went into the system. Can the Community Managers vzw_cm improve this? Also you forgot to include a link to your individual username (I hope I found the right one.) and the document link to the directions for Direct Messages. See How To: Direct Message

  • How can you be in two places at once when you're not anywhere at all?

    Hi all,
         I have an object oriented predicament I want to run by you just to see how best to solve it. My program is based around a library of objects called Midgets. I've structured it with MVC. The MidgetLibraryModel Object takes events from a controller, alters the MidgetModel, and sends out events to any view objects.
    So far so good. Now, I'd like to create "groups of midgets." It seems that I have two options and I have serious problems with both of them from a computer science stand point.
    Option A*
    Store the name of every group that a midget belongs to inside the MidgetModel itself.
    Problems with Option A
    * There is nowhere to store attributes or variables for any group.
    * Every time I display a group, I have to mine it's contents from the MidgetModel array.
    Option B*
    Create a completely separate array of MidgetGroupModel objects inside the MidgetLibraryModel, each group object would contain the ID numbers of the midgets it contained.
    Problems with Option B
    * if I ever delete a MidgetModel, I can't alert the group objects since I don't have a deconstructor.
    * When sending out a MidgetModel to be displayed, it doesn't have the groups it belongs to.
    * If I need send out a MidgetModel to be viewed, the view can't display the groups that the MidgetModel belongs to
    what would a computer scientist do?

    ask yourself whether a midget should know to what groups it belongs or whether a group should know what midgets belong to it.
    Each scenario has its implications for how the midgets and groups can be used and can interact, in some situations one or the other solution may be the most obvious one.
    In others you might have to implement both at the same time.

  • Why can't I see my content in itunes when I'm not online?

    With my ipad connected to my imac, and NOT being online,  the imac's itunes shows the ipads itunes content, but attermpting to call it up on the ipad itself, I get the "cannot connect to the istore" prompt with no content visible.

    Sometimes a simple restart or reset of the iPad will help.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that doesn't work, check out this support article.
    http://support.apple.com/kb/ts1368

  • Onustream can see chat and ads with sound but when eagles do not show, other videos do

    Have been watching eagles for months on ustreamtv. today I can get on chat line and watch and hear ads. When eagles are supose to be on I have black screen. Some other people are having the same problem.
    I am sure I have the latest irefox update.

    Hi
    I understand  - sorry to have missed your point before now.
    Some sites don't display those previews in safari - secure pages (https) for one, and also sites that are redirected.
    Taking the example in your screenshot, the site http://fabulouslyartsy.blogspot.com/ actually redirects to http://www.fabulouslyartsy.com/ and Safari (rather annoyingly) doesn't 'follow' the redirection & show the appropriate preview. See the image below - the blank preview is for the blogspot address, and the one visible to the right is from going directly to the site.

  • How can I reset my Apple ID security questions when it's not giving me the option to?

    Can someone please help me to figure out how to reset my questions!?!

    You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (91633)

  • How can I get Made In Chelsea from itunes when it is not available on my countries store?

    I want to buy and download the Made in Chelsea seasons. But on Itunes Australia, where I am, its not available. It is however available on the British Itunes but of course its in pounds. It there any way to get Made in Chelsea off Itunes? Or will I have to nuy dvds from overseas (something i really dont want to do because of the cost)? Any other solutions?

    Your only option is to have an iTS account for that country - you would need a local CC and local address to create an account for the country.
    MJ

Maybe you are looking for

  • How to select Subpartition name in a Select query?

    Hi, I have a table that is partitioned on date range and subpartitioned based on and ID list. Lets assume the table name is something like: MY_TABLE The partition name would look like: P_20110126160527 The subpartition list is as follows: GB, IN, AU,

  • Error in downloading. Where's the problem?

    I just joined Creative cloud, installed trial version of InDesign, tried to install Bridge, Photoshop and then Illustrator. With all of them i get this same info : Error in downloading. Where's the problem??

  • 10.4.10 update, dead hardrive

    hello i have a powermac g4 mirror door. per the automatic software update, i downloaded/installed OS 10.4.10 i restarted machine and everything was running very sluggish. i decided to reboot one more time. when the machine restarted, all i got was th

  • Muse dropdown tabs disabled on ipad?

    My new Muse built site is running (GoDaddy). Working fine now on IE8 as well on computers. But in a browser test on the touch screen ipad - drop down menus are't displayed. Is this a Muse shortfall? Also as a save to PDF from IE8 - apostrophes are sw

  • JavaFX Web Browser with GWT

    I'm using a web app (I'm using Drools, a JBoss rule management system), that has a GWT front-end, inside of my JavaFX application. It almost works perfectly except for one thing, there is a button in the web app that calls a GWT function Window.confi