Can I connect Mac mini to iMac monitor

Can I connect a Mac mini to iMac monitor ? To view Mac mini files

Hi Ricemail,
You *may* be able to do so, depending on the specific models of your iMac and Mac Mini, using a feature known as Target Display Mode. You may find the following article helpful:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Regards,
- Brenden

Similar Messages

Connect mac mini to imac

Hi,
I was wondering if I can connect an old mac mini to an imac so I can use the mac mini as an aditional hard drive to store all my music and pictures.
If so, how do I do it?
Thanks in advance.
Oscar

Welcome to Apple Support Communities
If the Mac mini and iMac have got FireWire or Thunderbolt (probably, FireWire 800), just buy a FireWire cable and start the Mac mini holding the T key while your Mac is starting. Doing this, your Mac mini's hard drive will show up as an external drive in the iMac, so you can store data in it. You may want to format the hard drive first.
This isn't the best way. If you aren't going to use the Mac mini, you can take the hard disk out of it, buy an enclosure, install the hard drive in it and connect it to your iMac. Then, format the hard drive > http://pondini.org/OSX/DU1.html Finally, open Finder and you will see the hard drive in the Finder sidebar, under "Devices"

Can I connect Mac mini to Windows laptop?

I would like to connect Mac Mini to HP windows 7 Laptop as to use
the laptop as keyboard and monitor instead of connecting to TV and using
separate keyboard.
Is this straight forward to do? does it need some workaround? or is it impossible?

Hi, you'd have to setup Screen Sharing on the Mini first it's like Remote Desktop on PCs.

Connecting mac mini to USB monitor didn't work!!

I connected new Mac mini(2007 model) with the latest HP USB monitor. Nothing got displayed on the monitor. Then I need to connect mac-mini to another VGA connector monitor. But still want to know to connect USB monitor with mac-mini as this is my target setup.

Thank you.
I used Tiger OS specific drivers from the following link.
www.displaylink.com/support/mac_downloads.php
Now it's working but not 100%. Upon starting of the mac-mini monitor works fine. But later when I switch off and switch on the monitor, then it doesn't work. Looks like monitor off -on trigger is not handled in the driver.
I will check with the driver like you have suggest and then acknowledge.

Connect Mac mini and iMac... please!

Connect iMac and Mac mini... please
Posted: Jan 30, 2006 7:17 AM Reply Email
Hi guys
I can't figure out how to make my iMac and Mac mini talk to each other... let me explain better...
I have a wired Linksys router that always worked ok connecting the iMac and a Windows XP... I used to connect them by SMB... I haven't been able to do the same with both Macs... do I have to enable "file sharing" or something?
Is there a way I can connect both macs wirelessly? even having a wired connection to the internet? both Macs have Blue Tooth and Airport ...
What I want...
I want to be able to share a printer connected to the iMac and have both HD mounted ALL THE TIME on both machines... so I would be able to work on the mini and save to the iMac... share my iTunes library that stays on the mini...
I am only being able to share my internet connection using the wired router... that's it... I can't go farther than that... why?
Sorry for the dumb question... I know it is supposed to be quite simple but I got stuck...
Cheers!

If you want the Mac's hard drives to always appear on each other's systems when they start up, you must have Personal File Sharing enabled on both systems. Once on, connect both Macs to each other, and click the little checkboxes next to the selected hard drive in the connection window. If each Mac requires a username and password, make sure to add those passwords to the keychain.

Connecting Mac Mini to iMac 8,1

What kind of cable can I use to connect my new Mac Mini to my 3 year old iMac Display?

You can probably do it with Screen Recycler over ethernet, firewire or wi-fi.
http://www.screenrecycler.com/ScreenRecycler.html
Dah•veed

Connecting Mac Mini to iMac?

I've got a dual core Mac Mini and 20" iMac (w/isight) - no display for the mini. Can I use the iMac's display with the Mac Mini? I know I can move files back and forth, but I'd like to change the Mini's settings (preferences, etc.) using my iMac G5 screen. Thank you.

If you do want to remote connect use Chicken of the VNC:
http://www.geekspiff.com/software/cotvnc/
It allows you to remote access and control another computer and the bonus is that it is Open-Source and free. If you like it and eventually need more features upgrade to Apple's Remote Desktop.

Suddenly can't connect mac mini to internet without signing in

I suddenly have to go to system preferences everytime I want to get online with my mac mini. Other devices are working just fine. This is the main computer that the router is connected to. Anyone have a fix for this?

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Reinstall OS X.

Is it possible to add a second monitor via mac mini with iMac

Hi
is it possible to add a second monitor via mac mini with iMac
or is there another solution?
all i want to know is if i can run a second monitor or link a mac mini for more speed like i heard you can with the G5 Towers.

The iMac will allow you to connect a second monitor but that monitor will show the same thing as the iMac's built-in screen.
You can network a Mac mini and iMac via Ethernet or Firewire.
Software load sharing like Xgrid can allow you to share work between the Macs.

Connect mac mini to internet via windows phone

hallo, how can i connect Mac mini to internet via my Windows Phone?

You are going to have to buy an external modem. They make ones that plug into the USB. Apple does not make one so you will have to buy a 3rd party modem. I would read the reviews before making the purchase to make sure you buy one that someone has tested with a mac.

Can't see external HD on Mac Mini from iMac

For months I had an alias on my iMac desktop that opened my external HD, connected to my Mac Mini downstairs.
It worked flawlessly. Both machines on Leopard.
I upgraded my iMac to Snow Leopard on release day (Mac Mini is still Leopard). I haven't connected to the external HD from the iMac since, but I tried it today and it can't find it.
I can browse the Mac Mini, and connect as my admin account and browse the entire Mac Mini HD, but the External HD just doesn't show up.
The external HD is still working fine on the mac mini itself, I just cant see it remotely.
Snow Leopard issue or something else?
Cheers

Apple told me that the HD drive doesn't show up on other user's page, as it has been hidden on purpose by apple, and only shows up on the main user of the computer, Are you the main user on the computer, if so maybe a problem but if you are an added user it just shows up a blank screen

I'd like to project what's on my Mac Mini with Samsung monitor to my standard definition Samsung TV via WIFI. What HDM1 dongle should I buy?

I'd like to project what's on my Mac Mini (with Samsung monitor) to my Samsung TV (standard definition) via my WIFI. What HDM1 dongle should I buy?

lyndafromorwell wrote:
I'd like to project what's on my Mac Mini (with Samsung monitor) to my Samsung TV (standard definition) via my WIFI. What HDM1 dongle should I buy?
You can in fact buy what you want, no need to go with Apple TV
To connect (wirelessly) your Mac to the HDMI on the TV:
They range from $100 on up.

How reliable is the Mac Mini or iMac (2009) models?

Greetings to you all. I have a question directed at anyone who owns the 2009 Mac Mini or has recently bought a Mac Mini either last year 2009 or this year, 2010. My Acer Aspire L-100 finally died on 29th Dec 2009 as a result of USB failure caused by a windows auto update. Fed up with Microsoft, I am thinking about switching over to Mac and thought the Mac Mini or iMac would be a good start. I am however troubled by the numerous complaints I am reading on the Apple website posts regarding the 2009 model Mac Mini loosing sound after a month or two of use and some posts claim that the sound on their Mac Mini is distorted, crackling and some had broken systems out of the box. How many of you have had similar sound issues with the Mac Mini? Also, is it better to get the iMac 21.5 inch instead? Has anyone had hardware issues with the Mac Mini and or the 21.5 inch iMac in less than 2-6 months of use? If so please let me know so that I can make up my mind, whether to purchase Mac computer platform or just build my own customized machine. What I need to know is, how reliable or durable is the mac mini computer, especially the 2009 model and how does the mac mini, especially with its small size, handle temperatures? Does the mac mini overheat? Please help. All information will be highly appreciated.

Remember, Apple offers a 1 year hardware warranty and 90 days free software support, both of which can be extended to three years from date of computer's purchase. This means if you appear to have what is a technical issue with your machine off the bat, Apple will cover the lemon issue, if it is obvious it is not an issue you the user could have caused. Mind you, if issues appear much later during the ownership, it gets harder to justify that it is a manufacturer issue. As long as you don't upgrade the internal hardware, the hardware test CD that comes with the machine will be able to tell if there is a manufacturer issue with the machine. All bets are off, if you change the RAM, or hard drive beyond the specs of the machine. Apple publishes the specs of the machine on http://support.apple.com/
Your machine shouldn't overheat unless you excede the published specs.
The advantage of the Mac is that malware and viruses are practically a nonissue, and everything you usually could desire is already built-in to the machine. So while you could build your own machine, you can't really get the integrated hardware and software as you do with the Mac.
Yes, the 27" iMac has been hit hard with issues, more around the display than anything else. I for one, if were forced to get an iMac, would get the 21.5".
I've not seen any specific Mac Mini issues really come to the fore.
If sound is lost on a Mac Mini, it usually is due to the fact that minijack connectors themselves are fragile to begin with, and endusers tend to jiggle them a lot in the connector, causing the connectivity to get lost. If you are careful to follow these directions about cables*:
http://www.macmaps.com/frayguide.html
You should avoid most of those issues. Thankfully there are 5 USB ports on Mac Minis, and USB audio is frequently better than the built-in audio, except when adding your own 5.1 speaker system with mini-Toslink connector speakers.
Don't forget the number of posters to this board, don't even amount to 1 tenth of a percent of all purchasers of iMacs, Mac Minis, or MacBooks any one quarter. Thus the remark you said was "rude" is not. It is factual. You are basing your information on what amounts to less odds of happening than a space program disaster with NASA. Mostly people who have problems are posting, and those who don't rarely do post.
I recently had a hard drive die after the three year warranty was spent, but hard drives I've seen die on Acers and Dells on the first day of ownership too, so that's nothing new. Backing up your data is the best way to deal with data loss*:
http://www.macmaps.com/backup.html
- * Links to my pages may give me compensation.

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

Bridging the gap between Mac Mini and iMac

Does anyone agree that Apple needs to add another model between the Mac Mini and the iMac? I think they need something like a Mac Mini Plus. Two models, one with the 1.83GHz Core Duo and one with the 2.0GHz Core Duo. The unit itself would be slightly larger than the standard Mini and include a PCI Express slot with several video card options and a faster (7200RPM) hard drive. Personally, I hesitate to buy an iMac because of the built in monitor. I would prefer to buy a separate LCD flat panel monitor that I could keep for years and use with different Mac models as I upgrade. As for the current Mac Mini, it's video and processor options are on the low end, albeit perfect for the casual user, but for someone that wants to do some gaming or video editing, they don't quite cut it.
Don't get me wrong here, I love the elegant design of the iMac, but I think Apple needs to offer something that allows us to have the iMac equivalent computing power without the built in monitor and without having spend a thousand more on a PowerMac.
Athlon XP 1800+ Windows XP Pro

Yes, I'd love something in the form of a Mac Mini that was closer in spec to the iMac.
Honestly, the only reason I won't buy an iMac CoreDuo is the built-in monitor.
And, the only reason I won't buy a new Mac Mini is that they are underpowered.
I have owned two iMac G5 systems, and both had serious faults with their built-in LCD panel.
The first would permanently etch in anything on the screen for every hour of intensive use.
It wouldn't etch it in in normal use. But, if I did any of my audio work, it would heat up the system so hot that the image on the screen would literally cook into the LCD panels plastic surface.
It literally looked like you took a razor blade, and precisely carved the exact image into the surface of the screen. Pretty nasty looking. Nothing would get rid of it, and it would happen every time I did my audio editing / processing work for an hour.
Naturally, the more work I did, the worse it got. I only got two editing sessions out of an LCD panel before having it replaced.
After going through that for a while, I sold the system after having a fresh panel installed under warranty.
I got tired of damaging the screen after every hour of work.
The second iMac G5 was purchased a year later. That one also suffered permanent damage to it's LCD panel. But, not quite as noticeable.
I know that there are a bunch of people getting ready to hit me with the "Image Persistence" explanation. But, trust me, I know about Image Persistence, and this wasn't it.
I was seeing actual permanent screen burn-in (which is not supposed to happen on LCD panels).
The service tech was absolutely amazed at the appearance of my screen. And, yes we verified it was the actual panel that was damaged. He wouldn't replace it without verifying that it was the panel itself.
Anyway, I called to arrange service on the second system again, and before I could get it in there, the backlight started flickering. And, I had already had tons of other stuff fixed on the machine. So, I sold it and bailed-out.
Now, after all the problems I've had with the built-in screens on the iMac G5 systems, I don't want another Apple product with a built-in screen. I want to use my own LCD panel.
I have an LCD panel that I'm using now. It's about 3 years old, and only cost me $200. And, it doesn't have even the slightest indication of image burn-in or image persistence. I use it every day, and use it just like I did the iMacs.
So, what I want now, is a machine comparable to the iMac CoreDuo, but without the built-in screen.
The current Mac Mini's cost way too much for their very low specifications.
I already have a Mac Mini G4. It's underpowered as well. But, no worse-off than the current Mac Minis.
Now, if Apple produced a Mac Mini with identical specs to the iMac, I'd gladly buy it.
Even better for them, I'd pay the same price as the current iMac to get it without the built-in monitor.
Yes, that's right, I'd pay the full price of the iMac to get a Mac Mini without a monitor if it was of the same specifications otherwise.
The current Mac Mini is obviously stripped-down to prevent competition with the iMac. But, I think they'd find that they would simply expand their user base if they offered a better Mini.
With their product line as it is, the current Mac Mini is not a compelling machine, and the iMac is not an option because of it's built-in monitor.
Get me a high-end Mac Mini and you've got a sale.

Can I connect Mac mini to iMac monitor

Similar Messages

Maybe you are looking for