Can I connect more than one phone to PC Companion?

I use PC Companion (version 2.01.149) to manage my contacts in an K550i, connection type is Bluetooth. Now I want to do the same with another phone, a K610i. But if my first phone is on and within reach of my laptop I can't find a way to switch to the second phone in PC Companion. So far, the only option seem to be to switch off the first phone (or move without Bluetooth reach) in order to get "How to connect" to be visible in PC Companion.
Any solution?

You can only connect one phone at the time.
If you want to move contacts between two phones you can do backup of the first one and then apply backup on the second (done that at home and it works)

Similar Messages

  • My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
    But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
    Appreciate any help!

    Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
    A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
    Power up the AirPort Express and let it run a few minutes.
    Hold in the reset button on the Express for 10 seconds
    Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
    If the Express is operating correctly, it will be back to factory default settings at this time.
    If you try the reset a few times and the Express will not return to default settings, the Express is defective.

  • HT3563 can I connect more than one bluetooth headset to my imac?

    Can I connecy more than one bluetooth headset to my imac?
    Thanks

    Anthony
    I have a Plantronics 975 earpiece that works very well with my Razr.  I
    just got a Panasonic KX-TG7873S phone system for my home, it has a
    "Link-to-Cell" cellular convergence solution, from what I understand it is
    just Bluetooth enabled.  I have paired both device with my Razr.  In
    settings, Bluetooth setting, both device show.  But only one device can
    connect at a time.  If my Plantronics is connected and I choose the
    Panasonic device, the Plantronics device disconnects and the Panasonic
    device then says it is connected.  Both devices work when they
    are connected.  Is it because they are both "headsets"?
    So, to have to remember to connect to one or the other device, depending on
    weather I am coming or going is not practical.
    On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

  • How can i connect more  than one database

    i would like to connect more than one database one my laptop
    now i have database one and sid=ddms
    and i would another such as sid=ddmf
    how can i connect two database on the same my laptop

    I am not sure what you mean by after built? Are you trying to export data from one database and import it into another? If so, export it using data pump making sure you have the correct ORACLE_SID. Also be sure both database have to same character set. Then change the ORACLE_SID to other database, and run data pump to import the data into the other database. Hope that makes any sense...

  • Can i have more than one phone number on my itunes account?

    My son and I use the same apple ID. He has a separate phone number to me and wants to use imessage on his ipad.
    How can I set up my account to use more than one mobile number?

    He would have to use a separate ID for iMessage in order to do this.  You can still share the same ID for iTunes; it doesn't have to be the same as the ID used for iMessage.  To do this, have him go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.

  • Can Not Connect More Than One Device

    Does anyone else have the issue of not being able to connect more than 1 device to your wireless network without it timing out and resetting the router? I pay extra to have what they say is the fastest internet but it never works. If Apple TV is streaming Netflix my iPad, my laptop and my desktop all have to be off and not connected to the WiFi or the router resets itself. My speed test actually timed out because it was taking so long both times I tried it, a month apart. I had the same issues before switching to X1 and getting my new WiFi modem. If I call I just get the run around and have my modem reset a dozen times with the exact same outcome...

    It would help if you post the model of the device.
    Also look over the troubleshooting tips and post the downstream RF power levels, downstream SNR and upstream power levels on all channels.
    http://forums.xfinity.com/t5/Basic-Internet-Connectivity-And/Connection-Troubleshooting-Tips/m-p/1253575#U1253575

  • Can I connect more than one iCloud account at the same time to share contacts with s.o.

    Is it possible to use/connect 2 or more iCloud accounts with my iOs device in order to share my contacts with somebody (Account 1) and still have another addressbook for contacts that should not be shared (account 2)?
    The other person should be able to connect to Account 1 too.

    No, you can only connect to one iCloud account.

  • Fifth Generation Airpot Extreme MD031LL/A can't connect more than one device

    I just came back from the Apple Store @ Cambridge, MA where I got a second fifth generation Airport Extreme Base Station (MD031LL/A) which is recognized by all the devices I have (Mac Pro, 2 iPhones and 1 Power Book) but I can only connect to the Internet via the Mac Pro. This is the second unit I try in a week and is just behaving the same way the previous one was and for which an Apple specialist at Apple Care told me "it shouldn't be behaving that way".
    2 Airport Extreme Base Stations malfunctioning in a row makes me wonder what other options are left for me...

    And here is the message I get after failing to connect to the Wi-Fi network. Notice how the bands went from 3 to 2 lines on the Airport Wi-Fi indicator next to the Airplane mode...

  • Ipod Touch-WIFI Problems-Can't Connect More than One at Same time

    I'm not an Ipod Touch user yet, but three family members are. Unfortunately, only one will connect to the Internet on our home wifi at a time. Each one works just fine on its own and will make the connection, but if one is already turned on it blocks the others. I have a laptop and it connects fine regardless of the Ipod Touch issues. I'm using a Linksys router if that matters. Looked everywhere but can't find someone experiencing similar issues. Thanks for any ideas/thoughts/help!

    Take a look at your router's settings for DHCP. Normally there is range associated for the allocation of IP addresses for wireless devices. For example, you would set DHCP to on, IP address range from 192.168.1.10 to 192.168.1.128. The normal defaults on the router should have given you an adequate range of address but you may have inadvertently changed something.

  • Can I connect more than one device to home hub?

    I am a new user and have my PC connected to my home hub and all works well.
    My husband has just got an ANDROID and we want to connect as well. I thought I was doing it ok and entered the security key but all I get is authenticating and not much else and it does not connect. Have I missed something do I have to put anything else in other than the security key?
    It connects ok to the external BTwifi and BT Wifi with Fon but of course we are not supposed to do that.
    Sue

    it may be a problem with your Android (whatever model) as any home hub or WiFi router should take loads of other devices I am not sure there is a limit but I have 8 connected.
    If you have anyone else that has a tablet or phone that you can get them to test to see if the problem is with the hub or your android device.
    The only other thing I can suggest is that if it is a home hub 4 which also uses 5Ghz as well as 2.4Ghz some people have had problems with 5Ghz and if you can see both from your device selecting the 2.4Ghz may help.

  • Can I connect more than one bluetooth headset at a time?

    Just got a Panasonic Bluetooth enabled phone, paired fine with the device.  But each time I leave/come back to the house I have to set in settings which headset I want to use.

    Anthony
    I have a Plantronics 975 earpiece that works very well with my Razr.  I
    just got a Panasonic KX-TG7873S phone system for my home, it has a
    "Link-to-Cell" cellular convergence solution, from what I understand it is
    just Bluetooth enabled.  I have paired both device with my Razr.  In
    settings, Bluetooth setting, both device show.  But only one device can
    connect at a time.  If my Plantronics is connected and I choose the
    Panasonic device, the Plantronics device disconnects and the Panasonic
    device then says it is connected.  Both devices work when they
    are connected.  Is it because they are both "headsets"?
    So, to have to remember to connect to one or the other device, depending on
    weather I am coming or going is not practical.
    On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

  • Can't connect more than one PC to my network at the same time.

    When trying to connect a second wireless laptop to my network, the one already connected gets disconnected. I'm using a WRT110 router(cable connection) that I bought 5 days ago, and two laptops with Win Vista. I don't have any PC wired connected.

    First thing which you need to do is upgrade the firmware of your Router. Go to website linksysbycisco.com/downloads... ......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Once you configure all the settings on your router... here are some wireless settings which you can set on your Router and i think this might make your both the wireless computers go Online...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • How can I connect more than one wireless speaker to my ipad

    i have a mini iPad and have linked two wireless Bluetooth speakers but they will only work one at a time. How can I get them both to work together ?

    Yes and it's very easy to do once you know what to do.
    Place all of the photo albums that you want to transfer to the iPad into one main photos album on your PC. When your iPad is connected to your computer's iTunes and after you have selected the iPad under Devices, click on the Photos tab and in the Sync Photos from heading - select that main photos album that you place all of your other photos folders into - select each album that you want to sync - and then click on Apply in the lower right corner to sync the photos to the iPad.
    iTunes: Syncing photos - Apple

  • Can I connect more than one Macbook to the same Apple TV?

    As per the title. My friend and I live together and want to connect our seperate Macbooks to the same Apple TV. Is this possible? If so, how?

    Does this mean we can register two Macs to the same ATV but only have one connected at a time?
    If so, that's exactly what I'm after.
    Thanks.

Maybe you are looking for