Can I connect more then one cDAQ-9188 in the same network?
Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.
You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
Is it possible to use/connect 2 or more iCloud accounts with my iOs device in order to share my contacts with somebody (Account 1) and still have another addressbook for contacts that should not be shared (account 2)?
The other person should be able to connect to Account 1 too.No, you can only connect to one iCloud account.
-
Can you use more then one micro photo on the same comput
i have had my micro photo for a year it works great i just bought another one but my computer wont recognize it. what gives?they are the same player zen micro ohoto 8 gigs
It should work fine. Both my Microphoto's work connected on XP Pro at the same time, I just have to keep track of which one has what kind of music. Have you tried scanning for plug and play devices, what kind of operating sys are you running? And what software are you trying to sync with.
Message Edited by VRevolution on 05-23-200706:45 AM -
Can you have more than one apple id under the same account
can you have more than one apple id under the same account
Stop using the same Apple ID for iMessage on these devices. Go to Settings>Messages>Send & Receive (Receive At in iOS 5), tap the ID shown, sign out, then sign back in using a unique ID for each device. (Or, just sign out and stop using your Apple ID for iMessage.)
-
Can I have more than one ipod touch on the same account, or must they each have their own ID.
If you use the same account see the following to separate Messages and FaceTime between the two iPod see:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime -
Can there be more than one JVM Running on the same machine
Can there be more than one JVM Running on the same machine.
Even JVM's of different versions (or vendors) can run on the same box at the same time.
-
HT4859 Can I have more than one icloud account on the same pc I share with my spouse?
Can I have more than one icloud account on the same pc that I share with my spouse?
Yes, providing that you use seperate user accounts on the computer.
-
HT4759 Can you have more than one computer linked to the same icloud account?
Can you have more than one computer linked to the same icloud account? If so how do you add a computer?
Yes, of course - that's the whole point, to provide syncing of data such as calendars, contacts and email between computers and iOS devices. Having got iCloud up and running on one computer, simply sign all other devices in at System Preferences (or Settings)>iCloud with the same login. (Lion 10.7.2 and iOS5 are the minimum requirements.)
-
HT2534 can you have more than one itunes account on the same computer?
can you have more than one itunes account on the same computer?
Yes. Either create and use separate Windows user accounts, or launch iTunes with the Shift key held down as desired.
(62377) -
Can I run more than one "main application" in the same JVM?
Hi,
We need a instance of JVM to run each standard application, Applet or Xlet?
Can I run more than one "main application" in the same JVM?
Thanks.stdioo wrote:
Hi,
We need a instance of JVM to run each standard application, Ok
Applet or Xlet?You have no control over the first on a client machine. Presumably not the second either although I don't know what it is.
Can I run more than one "main application" in the same JVM?Application. Not applet.
You must have a class (code) to start each "application". To keep the environments clean from each other you can use a class loader. -
Can you connect more then one external screen to a mac with one mini display point?
Does any one know if you can connect more then one external screen to a mac, with one mini display point?
This company has a dual monitor solution for DisplayPort;
http://www.matrox.com/graphics/en/products/gxm/dh2go/ -
How can I restrict more then one user to access the table?
Hi !
I have a problem and two solutions and I am a bit confused as to
which one is the best one and/or can there be any better way of
handling the problem ?
Problem : I have to update a key field of a table when I update
it in the form 5.0 screen. I am basically doing a maintenance of
a table and if a certain field is updated then the change has to
be reflected in two more tables. But the issue is that the field
is a part of the key in those two tables. So all I can think of
is that I need to insert new set or rows for that new value of
the field and delete the old set of records for old values of
the field.
There are two ways of doing it;
1.One option can be to explicitely define two cursors separately
and fetch the values in them one by one and then insert the new
records and then delete the old records in both the tables. This
I feel will be a cumbersome process both in terms of processing
time and the coding.
2.Second option I was thinking can be to create two flat tables
(without keys) and insert the values in them and update the
changed field there and then insert the rows in the respective
tables. Delete the old records in the main tables and delets the
records in these flat tables. This is a bit more faster and
easier to predict and code. This seems to be a better option for
me.
Any comments on these ?
In both the cases I was thinking of making some provision so
that more then one person can't update the table simultaneously.
Since if there are more then one persons doing the processing
then some inconsistency might creep into the whole process.
This is easier to do in the second process as if I check the
data in the flat tables and if there is some data then I can
presume that some one is doing the processing and I can ask the
other person to hold for a while. But in this case how can I
stop more then two people to simultaneously check for the empty
table and start inserting the record ?
I was just thinking of having a sepatare table having only one
field and this will be a key field and as the process begins the
process will insert a fix value say 'Y' in the key field and at
the end of the process the record will be deleted and this way
we can restrict the user to access the process more then one at
a time..? Since you can't have same value of the key in a table
more then once.
Any better way of handling it will be deeply appreciated.
How about locking the table at the begining and releasing the
lock at the end ? Will there be any issue in that? since I am
inserting and deleting the rows in the same transaction.
Comments welcome,
Shobhit
nullHow about performing the update IN the database using a stored
procedure?
By using non-database fields on your form to get the
information, you can then call the procedure in the database to
perform the updates. If an error occurs in the procedure you
rollback, if necessary, and send a message or status back to the
form. If it succeeds you might wish to commit and then re-
execute the form's query -- using either the original key values
or the new key values...
null -
MVC - More then one view managed by the same contrler.
Ok, I have been reading and searching examples on the MVC .. but all the examples show just what to do when you have just one view of the model. What I f I have the more the n one view to handle the same model.
As we know the views would need to be registerd inside the controler? How can I do this If I have more then one view?
does anyone have any ideas!?
Would it still be correct if when an action occures on my view instead of the controler capturing that event an handiling, I make my view call the controler to handle it?So in your opinion is it ok if I call my controler from the action event of my button?
I just did a small example below:
import java.awt.event.ActionEvent;
import javax.swing.*;
import java.awt.event.ActionListener;
public class Starter extends JFrame{
private Model myModel = new Model();
private Controler myControler = new Controler(myModel);
public Starter(){
JButton myButton = new JButton("Test");
myButton.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){
myControler.makeAction("Hello");
this.getContentPane().add(myButton);
this.pack();
this.show();
public static void main(String[] args){
new Starter();
}As you can see I am calling the controler to manage the new data from the action event of 'myButton' !
Is the above code ok with the spirit of the MVC? -
Can you have more than one iTunes account on the same computer?
My wife just got a nano and wants to set up her itunes library. Since we have different tastes in music, I thought we should have separate libraries under our separate log-ins to our PC so that her music didn't upload to my iPod and vice versa. Is that the right approach or is there a better way?
There are basically two ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library and user account.
b) Creating multiple user accounts and having separate libraries.
Sharing a Library
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists -
How to call more then one Function modules at the same time
HI ,
How to call more then one FM at the same time .
Modertor Message: Interview-type Questions are not allowed.
Edited by: kishan P on Jan 2, 2012 2:22 PMThey are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
Thanks
Maybe you are looking for
-
Printing, please help!
I am still having so much trouble printing to my HP Photosmart B209a printer. I have tried everything, and nothing is working. Whenever I print the colors do not match up at all. I am using a Mac OSx and again printing to HP Photosmart B209a. Please
-
A few iTunes 6 & 5 visual bugs
I also noticed these glitches in iTunes 5, 5.01, and 6, they were not in 4.9 or previous that I can recall. In the "Get Info" for any file, absolutely no album art shows up in the art section (see link 1) or in the summary tab (see link 2) Then in th
-
PDF printing Missing installed prnters
We're starting to see an issue where a machine will have several printers installed people can print to any of then from word, excel, Chrome etc but for PDF's only one or sometime none show up in the drop down for the list of printers. We're using ad
-
Can I delete an old Apple iD and have my apps move to the current ID?
-
Dequeuer/purge and hanging
I'm messing around with AQ right now (ostensibly, to learn it). As a test, i populated the queue, and executed DBMS_AQ.DEQUEUE twice with the default option of wait forever. The first one retrieved the message, the second is waiting for a new message