Can I connect my Airport Extreme with my AT&T phone line

We have an AT&T DSL line and modem in the house and would like to connect that phone line to my Apple Airport?
Is that is something I can do myself?
Does it work good for others out there that use AT&T
Thx Much

I too didn't realise the AE has no modem, so just bought a "Billion 5200s" modem which seems to work just fine.
At the risk of going off topic, but in the spirit of also trying to contribute to the discussion, I initially set up the AE (firmware now 7.4.2) to "connection sharing" which I didn't think was quite correct, as the 5200s modem performs NAT. However, it's worked ok for a couple of days, but then trying to access an "Evocam" connected camera failed from the internet, but fine locally. I suspect both devices doing NAT doesn't work so well.
So, I've just changed AE to bridge mode, & camera access now works
What I still can't do is access my AE connected USB hd from the internet. The few write-ups I've found all seem to presume (but without explicitly stating) NAT is performed by AE. I did briefly try disabling NAT on the modem, but nothing worked then.
Certainly over here, ADSL modems are not too common, manufacturers seemingly preferring to sell only combined modem/routers, which maybe introduce problems for folk new to an AE.

Similar Messages

  • Can't connect to airport extreme with my Sony Vaio laptop - don't have airport utility disc, how do I get connected?

    My main home computer is an imac and all devices are apple. I do have however a sony Vaio laptop for work and I cannot get it to connect at home to the airport extreme wireless network. Can I get an airport extreme utility disc to install manually?
    Roooble

    You can download the Apple Airport Utility directly from Apple:
    http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
    Regards,
    Shawn

  • HT4356 I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    Rufus Cat-
    Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
    I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers.  <iOS: AirPrint 101>  Therefore you need to take another approach.  To start, I suggest you download the free HP App, ePrint Home & Biz.  It has limitations, but should get you printing with your existing setup.
    There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
    Your best option may be to share your computer's printer as AirPrint over WiFi.  Programs that are reported to do that well are Printopia and FingerPrint.  Your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for PC and Mac>
    Fred

  • Do I need to connect the AirPort Extreme with a ethnet cable

    Do I need to connect the AirPort Extreme with a ethnet cable

    Hi Tracy,
    I have an airport express connected by ethernet cable to a Netgear modem which is connected to a phone socket. Those devices stay at one end of the house. I can use my MacBook Pro to connect to the internet (by Wi-Fi, no cables) anywhere else in the house.  I hope this helps.
    Ian.

  • Can I use the airport extreme with my Mac OS X?

    Can I use the Airport Extreme with a Mac OS X  10.5?

    Yes. In addition to administer the latest version of the AirPorts, you would need AirPort Utility 5.5.3, which requires OS X 10.5.7 or later.

  • Can MacOS9 connect to Airport Extreme shared disk?

    Hi,
    I have set up a network in my studio with an Airport Extreme. I attached a 1TB USB disk to it and shared it over the LAN. On the network, there is 1 Win98 PC and a good old PowerMac G4 running MacOS9.2.2. Is there any possibility for the G4 to connect to the shared disk on the AE? Right now, it says that the server I try to connect to uses an incompatible AFP protocol.
    Any idea?
    Thanks!
    nicolas

    I am very disappointed by this issue. I have an Airport Extreme with an attached USB drive. I use this to store my movies because they clog up my laptop drive.
    I called to my local Apple Store to buy an Apple TV so I could watch these movies on my TV. I asked a 'stupid question' to ensure I could use the Apple TV for what I though would be a very basic and common task. I was astonished to hear that it could not carry out this functionality.
    I hope this is something that will be resolved very soon, to be fair Apple products are supposed to work together!

  • Can I use the airport extreme with a random router?

    Can I add an AirPort extreme to an existing network and have a laptop play iTunes music to a stereo? I'd like to not drop 200 bucks on a new router. Thanks for any help!

    I don't agree. I have a 2wire router for my Qwest DSL and I cannot get Airport Express to work properly. I cannot use any encryption, so I am taking the AE back tomorrow. I posted a question here, but no one answered it, and I've been chastized for bumping posts in the past.
    I'm very disappointed with my experience, and the lack of information on the packaging for the AE.

  • Can i access music on my hard drive connected to airport extreme with my iphone 5

    Can I access  photos and music on my usb hard drive connected to an airport extreme using an iPhone 5? I can access theme with mac and pc.
    Thanks, Kevex.

    Yes, but not out of the box. You have to download an app like FileBrowser.

  • Windows XP client can't connect to AirPort Extreme AP with WEP enabled.

    Hello,
    I have big problem with Mac Mini AirPort Extreme working in AP mode with Windows XP client.
    Some time ago, AP refuse to connect Windows XP clients (notebook) when WEP is enabled (40/128 bit, same problem), while before that, everything work perfect.
    On other hand, iPhone can connect using WEP without an problem.
    When WEP is turned off, XP client can connect but this is not acceptable for me.
    I must notice that friend of mine have absolute SAME PROBLEM which rise almost at same time few months ago. They have Mac Mini and XP notebook (different then mine) which can not connect with WEP turned on, while his iPod touch work!
    I guess that this happened due AirPort Firmware upgrade included in some of Apple software update.
    Does anybody have similar problem or know the solution?
    My AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: 1.4.16.2
    Current Wireless Network: Mac mini
    Wireless Channel: 11
    Tnx in advance.

    mikikg, Welcome to the discussion area!
    Sorry but this is a known issue.
    The only solution is to get a real wireless router instead of using your Mac mini as a base station.

  • Can i connect an airport extreme (us version) with a new airport express (euro version) ?

    Hi, I lived in the USA for a while and moved back to Europe.
    I have an airport extreme (US purchased) which i would like to link with a new airport express (EURO purchased) in order to extent my network.
    Is this possible ?
    I have multiple problems doing so, which leads me to believe the US and EURO product might not be compatible.
    Thx for your kind assistance, G.

    Connecting routers wirelessly to extend a wireless network is known as a Wireless Distribution System (WDS). Although AirPorts can extend other AirPorts in a WDS, they only work with a few non-AirPort ones...like some Linksys models.
    Here are a few articles on the subject:
    - http://discussions.apple.com/thread.jspa?threadID=222773&start=0&tstart=0
    - http://discussions.apple.com/thread.jspa?messageID=607414
    - http://rgbdream.com/?p=44
    - http://www.dd-wrt.com/wiki/index.php?title=WDSLinked_routernetwork
    Another option, although maybe not as practical in your circumstance, is to connect the AirPort base directly using an Ethernet cable to the Linksys. Then setting up the AirPort as a bridge.

  • How do i connect my airport extreme with my airport express

    how do i link my Airport Express with my Airport Extreme?

    Hello Bob -
    I have an Apple Extreme (5th Gen) and I have tried to extend my network with an Apple Express Model No. A1264 with the ethernet connection.  It does not seem to work, and has crashed my network twice.  When I did get it to work, the wireless crawled.  When I took the AirPort Express off of the network the speed went back up.
    Can this be done to extend the network, as I have the Extreme in the basement where the cable comes into the house, and I have two other floors that need wireless access.  Any suggestions for this older model AirPort Express? 
    Thanks.

  • How Do I Connect An Airport Extreme With Password to another Wireless Devic

    We have a setup for two different wireless devices so that there are multiple locations that can get online, but the entire setup has no passwords assigned. We would like to assign passwords to both wireless devices so that only the appropriate people are getting online. How does one do this?
    The first wireless device that connects directly to the modem from the phone company is a brand new Apple Airport Extreme. The computer that set up the device so that people can get a signal was from a PC that is directly connected to the Airport Extreme via an ethernet cable. Also connected to the Airport Extreme is an ethernet cable that goes (50-100ft) to another wireless device - by Netgear - which then sends out another signal to pick up wireless internet, which is the signal/network that I work from.
    If we assign a password to the Airport Extreme, I'm guessing it will complete screw up the connection to the Netgear. How would that be dealt with? And, how could we then, if we wanted, set up a password for the Netgear as well. I've read some initial information on the user guide CD and online, but I don't know the terminology of whether these are networks or just wireless devices 'bridged' together, etc.
    My biggest concern, is it works right now, but the owner of the devices wants to put passwords on it and I want to make sure we can keep it working even with passwords. Does anyone know how to easily set up passwords and can I do it from my computer even though they were initially set up by a PC? Or do I have to do it from the PC and if so, how, because I am completely a Mac person and am very unfamiliar with Windows. Thanks.

    Question that I need to know now is how do we set up a password on the Apple Airport Extreme now, when it is already set up and working without one?
    Open AirPort Utility.
    Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then click Wireless.
    Choose a password scheme from the Wireless Security pop-up menu.
    Enter the password all users will need in order to join this wireless network.
    AirPort Utility 5.1 Help: Password-protecting your wireless network
    Also, are there different types of passwords and if so, what is the most reliable one so that we don't lose connections, time out or have any other quirks?
    There are different types of wireless encryption. WPA2 and WPA are the most secure especially when used with a non-dictionary password. 128 bit WEP is passable in most situations but not very strong. 40/64 bit WEP is extremely weak.
    There is really no general "reliability" issue with any of them. Some devices aren't compatible with some of them.
    If when we assign a password to the Apple Airport Extreme and for some reason the Netgear stops working, how do we unassign/take away the password on the Airport to get it back to the current setup that we know does work?
    Follow the procedure above but disable wireless encryption instead of enabling it.

  • How many computers can be connected to Airport Extreme?

    Hi, we have some kind of medium sized network at home: currently we have about 15-20 devices (Macs, PCs and network printers) that are all connected together by a D-Link DI624+ router. However, for time to time that way too much for the router so we're continously looking forward for a new solution that can handle this amount of devices but still is cheap.
    Do you have experience with Airport Extreme as a router for 15 to 20 computers/network devices getting Internet from and being controlled by it? Does it work without problems and is it reliable?
    Out current router often crashes, needs restarts and sometimes looses the whole configuration when more computers are active at the same time.
    Thanks a lot for you ideas!

    Right from Apple's main page for the Airport Extreme.
    http://www.apple.com/airportextreme/
    "With the new AirPort Extreme Base Station, you and up to 50 of your friends, colleagues, or family members can enjoy a robust wireless network offering up to five times the performance and up to twice the range of networks created with the earlier 802.11g standard.2"

  • Can I connect my Airport Extreme Time Capsule via ethernet to another router (non-Apple)?

    I've been trying to figure this out for a few hours and have gotten nowhere. I have an Archer C7 AC1750 router set up in my office, connected to my Zoom 5341 DOCSIS 3.0 Modem; this has been my main router and has worked fine. I have moved some things around and now have my PS3 and PS4 in my master bedroom but can no longer hook them up via ethernet to the Archer C7. I have run ethernet through the attic into the master bedroom and want to use my Airport Extreme Time Capsule as a way to hook up the consoles via ethernet. If I can use the Airport Extreme to extend my wireless network back to the bedrooms that is even better, although that is an afterthought.
    I am not sure what the settings need to be to make this happen. I have searched and tried a number of things but have not found a working solution.
    Any help would be greatly appreciated.

    Please start over with a default reset on the Time Capsule. This will not affect any of the stored data that you might have on the drive. You can use the same device name and password that you used before if you wish.
    Power up the Time Capsule for a few minutes. Then hold in the reset button firmly for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
    Make sure that the Ethernet cable connection from the Archer router connects to the WAN "O" port on the Time Capsule
    Open up AirPort Utility
    Click on Other WiFi Devices
    Click on Time Capsule xxxxxx
    AirPort Utility will suggest a setup, which you want to ignore
    Instead, click the Other Options button
    Select the Create a new wireless network setting and click Next
    In the Network Name box, enter the exact name of your Archer wireless network
    In the Base Station name box, enter a name that you want to use for the Time Capsule device
    Uncheck the box to use a single password
    In the Network Password box, enter the password for the Archer wireless network
    Verify on the next line
    In the Base Staion box, enter a password that you want to use as a device password for the Time Capsule
    Verify on the next line
    Click Next and wait while the AirPort Utility creates a network
    Ignore the step about unplugging the modem and click Next
    Do not enable the Guest Network option and click Next
    Wait while the network is being set up. When you see the message that the wireless network is available, click Done
    The Time Capsule will now appear in AirPort Utility with a blinking amber light
    Click on the Time Capsule icon, and then click on Edit in the next small box that appears
    Click the Network tab at the top of the window
    Change the setting for Router Mode from DHCP and NAT to "Off (Bridge Mode)"
    Click Update at the lower right and click Continue
    Wait a full minute for the Time Capsule to restart and you should have a green light
    It would be an excellent idea to power off both the Time Capsule and Archer router now, wait a minute, then start the Archer router and let it run a minute. Then, start the Time Capsule up and give it a minute
    You should be all set. The Ethernet ports on the Time Capsule are now operable and the wireless network has been extended using AES encryption.

  • Printing with HP all-in-one connected to Airport Extreme with USB

    We have an HP Photosmart 2610 all-in-one, an AirPort Extreme base station, and a G-5 MacIntosh running OS 10.4.8. We can print when the all-in-one unit is connected directly to the Mac with USB cable, however, we are unable to print when the USB cable is connected to the base station. What can you suggest?

    Which driver are you using?
    According to HP must use drivers 6.3.4 or 7.0
    http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00035369

Maybe you are looking for

  • Create hyperlink to "next page"

    Is there a way to create a hyperlink on a master document that automatically goes to the next page in the document? I can't find that option anywhere, which seems very strange. If I have a document of 50 pages, it is incredibly tedious to have to add

  • PLS-00801: internal error with FORALL

    I have the following procedure that I am trying to compile but I am getting an error: <pre> PROCEDURE procedure_1 AS cursor cur_1 is select column1 || column2 || column3 || column4 || column5 || column6 || column7 || column8 as concat_column from tab

  • I am totally stumped...

    A few weeks ago.. My PC started acting up.. I cannot duplicate the problem... it does it randomnly.. However.. I have began to notice that my problems seem to occur if I push the CPU.. like with games.. or Compiling source code.. (I'm a programmer).

  • Need a number for benin africa is that possible?

    Im trying to get a number to use so I can call him and so he can call me local.  Thank you. Chandra Mebane. He lives in Benin

  • DBMS_PROFILER Empty

    Hi, I'm having some problems with DBMS_PROFILER. I have a good sized PL/SQL package, approximately 2000 lines, that I am trying to profile. I do a DBMS_PROFILER.START_PROFILER at the beginning of the whole process and a DBMS_PROFILER.STOP_PROFILER at