Can I connect my G20-110 direct to my amp?

Hi folks,
Does anyone know if i can connect my G20-110 direct to my amp???

Hi
Which cable did you use?
As far as I know you need a similar cable like this one:
http://www.kabelstube.de/webseiten/catalog/product_info.php?cPath=22&products_id=44
Furthermore please check you sound properties in the control panel.

Similar Messages

How can I connect to my printer directly through ethernet?

I have a Lexmark laserjet printer that's connected directly to my eMac's ethernet connection. I also have a third party usb wireless LAN adaptor that connects to my room mate's old airport to provide internet to me.
I can't find a setting with my Network Preferences control panel that allows the usb device to bring in the internet while the printer is connecting to my ethernet connection. I would think that usb device would connect through TCP/IP and the printer would connect through AppleTalk via ethernet connection. But I seem to be able to only do one or the other but not both.
I would like to find a Network setting that allows both connection to happen simultaneously.

I do not see your printer listed here:
About AirPrint - Apple Support
You need to buy the right printer.
The iPad uses a print technology called AirPrint. Airprint is a particular communication protocol that flows over WiFi. So, having a WiiFi printer isn't sufficient. The printer needs to be of an Airprint variety of WiFi.
which I can't connect to laptop either.
I'd contact epson.
Once you get the printer working, you can...
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links,
   see Texas Mac Man list:
     https://discussions.apple.com/message/21291967#21291967
   or
     http://ipadhowtouseit.com/ipad-printing/

HT1126 Can I connect the Airport Express directly to my wireless router?

The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
should I reset the system?

can i connect the airport express into an ethernet port in the wall
I assume you are asking about obtaining an Internet connection here.
First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
If no, then you can connect the Express, but you will not have an Internet connection.

Can I connect to SAP database directly with ODBC?

I need to read data from SAP and write them into ms sqlserver. I wrote a RFC in SAP and used VB.NET to call RFC. I wonder that the RFC efficency is very slow while reading a great lot data. RFC also cannot support complex condition string, and it cannot fetch my data flexibly.
I found that the user who was included in a user group "db<sid>adm" could connect to db2 udb with ODBC in VB6.0 or VB.NET. I also can use the SQL sentence to get data flexibly.
Please tell me whether I can use this user to read (just using select sentense) data from DB2 UDB directly, or whether I can use the newly created user to get data. Will this method cause any problem ?

> Will this method cause any problem ?
Pretty likely: yes, it will.
You may want to read this thread Retrive Data From SAP Using C Language first (and the blogs I refered to in it).
What it boils down to is: you're trying a super-low-level access to data in order to perform a high-level business data exchange.
You could as well hex-read the data files of the database or the blocks from your hard disks.
There are a bunch of options to remote access data in SAP systems and maybe your RFC can be tuned to better support your needs.
But don't move over to the 'dark side' of direct database access
regards,
Lars

Can I connect my Time Capsule directly to the Verizon FIOS ONT?

Hi
I'm getting rid of Verizon FIOS TV and phone, but keeping FIOS Internet.
My ONT is a TELLABS 612A, the ethernet port is active and connecting to the Verizon router without a problem. The coax is gone -- toast. The Time Capsule is connected to the Verizon router and I'm running my wired and wireless network off the Time Capsule. I want to completely get rid of the Verizon router so that I'm no longer paying a router rental fee.
So I want to either:
1. Connect the TC directly to the ethernet port of the ONT and use the TC as the router.
2. Buy another ac router as a bridge. Obviously this option seems redundant.
I'm interested in the feasibility of option 1 and to hear from people regarding the setup they used.
For option 2 I'm similarly interested in hearing about the setup and replacement router they used.
Many thanks
Simon

Ok.. this is where life gets more difficult.. and you might need a network expert to look at things.
I need numbers and screenshots.. please plug a computer directly into the ONT.. do you get internet on that computer. If so give me the whole network screenshots from the ethernet preferences.. showing me IP, subnet, gateway and DNS.
Then plug in the TC and give me the screenshots from the WAN side of the TC including the same info as above.
Do not blank out anything.. you are on a dynamic IP so it will change when you swap things around.. but I need the exact values to work on.
I can tell you the Time Capsule can have issues with fibre connections. The reason is fairly complex but it has to do with Apple being too purist in their network design.. and the reality being much messier and needing routers to be far more flexible than Apple allows. (The gateway of the connection is not contained in the subnet provided with the IP).
Or does your connection use pppoe? Some fibre connections do and Apple has definite issues with PPPOE.
Anyway some things in the end simply prove too hard.. that is the point of the test.. if it is too hard.. stick to the current setup and live with it.
I have the same issue with ADSL.. every other router works fine.. but I cannot use an apple router as the main network router. It just is a failure on the PPPOE and does not allow sufficient settings to comply with the ISP requirements.

I have been given a second hand mac pro that does not have a wifi card in it. my router is down stairs so can not connect the mac pro direct into the router can i use my time capsule which uses wifi to my router to connect to the internet?

I ha

If you have a non-Apple "main" router, then "join" would have been the only way it could connect.
Unfortunately, the Time Capsule does not provide any routing functions in this type of setup, so the Ethernet ports are not enabled in this setting.
If you have an Apple "main" router, it may be possible to enable the Ethernet ports in another type of setting. Then you could connect the old Mac to one of the Ethernet ports on the Time Capsule for Internet access.

Can one Connect a G4 PowerMac directly to Airport using Ethernet cable?

I have a PowerMac G4 as a music machine and want to connect it to my Amplifer. I don't have an Airport card in the G4, but have been given an Airport Express, so was wondering if it is possible to connect using the 10/100 connection from the G4 staright to the Airport Express, and then using the optical connection into my Amp. Has anyone done this before?

The ethernet port on the AX is only active as a LAN connection when the AX is connected wirelessly to another base station using WDS. Unless your AX is connected in such a manner, you are out of lick.

Can't connect to a networked printer - Airlink101 USB Print Server

I am new to Mac. I am trying to connect my iMac to a Brother HL-5040 laser printer through an Airlink101 USB print server over my wireless network. The iMac connected to the 802.11g network immediately without any issues which is more than I can say for the other XP machines I own. I have several other Windows PC's networked and they all print just fine. Using the print setup utility, I can find the networked print server and add it to the printer list; however, I can not print. The status monitor indicates that it can't connect. The install directions on the Airlink101 website for the Mac does not seem to match the options that are part of the "add a printer" utilility. Any help would be appreciated.

thlatz wrote:
When we try to add another one of the printers it finds the printer with the IP, it auto-detected the driver, then when I click next, I get an error stating there was an "error connecting to the printer would you continue anyway?"
We try to print but the queue just continuously pauses and nothing gets sent to the printer.
This could be a result of the protocol you selected. IPP is the default listed. If you remove this printer and add again, but this time change the protocol drop menu to HP Jetdirect-Socket, see if this works better for the user.

Can I connect my Time Capsule using Verizon FIOS

Can I connect my Time Capsule directly to Verizon FIOS connection?

Suyiitapi wrote:
So I have to use Verizon's router first and cannot go directly into Time Capsule then. Corrrect?
I am not sure we are talking about the same thing..
The FIOS is a full router.
You plug the TC into the FIOS by ethernet.. WAN TC, LAN FIOS.
Then you plug your computer into TC or FIOS.. or you can use TC wireless or FIOS wireless.. both will connect to both TC and internet. But generally for high speed backups, you will be better connecting directly to the TC.. whether by wireless or ethernet.

Server error, cannot connect to port 110

Hello Support,
I'm trying to set up a mail account but can't connect to port 110. The mail account works on my old powerbook. I've tried changing the settings to 111, 125 etc. No luck.
What am I doing wrong???
Please help...

I'd call your ISP and go through your settings with them. It's likely that something in your setup is incorrect, or they changed their server to require new settings recently.
Mulder

Can you connect the TC directly to a Mac Book Pro thru either USB or Ethernet?

Can you hook a Time Capsule directly to a Mac Book Pro thru USB Port or Ethernet or?
So that you can speed up the transfer time??
It's so slow compared to directly connected FW800 and Thunderbolt Drives...
It's painful...
Thanks

Ethernet, yes. Connect the Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule. This should be 4-5 times faster than wireless. Be sure to turn off wireless on the Mac.
USB,no.

How can i delay the present of direct connected route?

Hi, I got 2 3550SMI switch interconnecting by Etherchannel. Each 3550 has an uplink to its upstream router (R1-SW1=SW2-R2). R1 and R2 connects to the remote site routers (say R3 and R4).
With EIGRP redistribute connected, R1 update the direct connected network via WAN link A to R3 where R2 does the same thing updating R4 via WAN link B.
The failover is fine after SW2 powered off. However, problem occured when I powered up SW2. During the bootup of SW2, there was carrier signal which brought up the ethernet port of R2 and the direct connected route presented in R2 then updating R4. Some of the traffic had started to come over from R4 via WAN link B to R2 while SW2 is still booting. (or Etherchannel was not yet ready). As a result, workstation connecting to SW1 cannot be reached for those traffic came from R4->R3->SW2.
I have tried to use "carrier-delay 60"on the ethernet port of R2. It seems solve the problem since the direct connected route delay 60sec. Within that 60 sec, no update via EIGRP from R2 to R4 so that all traffic still went through R3->R1. After that 60 sec, SW2 had already bootup and the etherchannel was also ready.
However, i can only do it with C3725 router. I've tried 1750, 25xx, 26xx and 3640-12.3T but the behavior was not expected (route still present immediately after carrier signal detected).
My questions are:
Is that command valid on Eth or FE interface?
Is there any different using that command with diff. router series, eg. ISR (18xx,28xx,38xx)?
Is there any condition that I could make it work? (at least 3725 worked)
Is there any other way to delay the present of that direct connected route?
Thanks.

Hello,
instead of the 'carrier-delay' command, you could try to change the EIGRP hello and hold-time intervals (which default to 5 and 15 seconds respectively on broadcast media such as Ethernet), in order to delay EIGRP convergence. So, on your Ethernet interfaces when you use the interface commands:
ip hello-time eigrp x 60
ip hold-time eigrp x 180
the redistributed routes will show up only after 60 seconds, which effectively does the same as the 'carrier-delay'...
Can you try that and see if that works for you ?
Regards,
GP

Can only connect from one direction

I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

Hi
Is the other person a PC user.
Tony

Router problems how can I connect direct

I am continually having router problems from my service provider. How can i connect my printer directly to my computer? Thanks

Hi,
You need a printer which supports this first and then use the following instructions:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/wireless-direct.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Firefox unable to connect after brand new first time installation, IE can load fine, I have followed all directions for firefox can not connect but other programs can, and it did not solve the problem

I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
== This happened ==
Every time Firefox opened
== I downloaded it for the 1st time ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)

http://support.mozilla.com/en-US/kb/Firewalls
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Error+loading+web+sites
http://kb.mozillazine.org/Error_loading_websites

Can I connect my G20-110 direct to my amp?

Similar Messages

Maybe you are looking for