Can I connect my Ipod Nano to my sound system with amplifier

Is it possible to connect my Ipod nano to my sound system which has an amplifier. If so any problem will occur to my ipod nano.

The usual way of doing this is to buy the universal dock, then use the line out jack on the dock to connect to your amp via a cable that has a mini jack (like the one on your headphones) at one end and 2 RCA phono plugs at the other end (to connect to line in sockets on your amp).
You can do this direct from the headphone socket on the iPod instead of buying the dock, but personally I don't think the sound quality is as good this way.

Similar Messages

  • I can't connect my iPod nano 6th gen to iTunes 11.1.

    I can't connect my iPod nano 6th gen to iTunes 11.1. It keeps saying 'it could not be identified properly". I've tried all the steps on troubleshooting page but nothing's successful. Anybody got some help?

    I found I had the same problem so I uninstalled iTunes, Apple Mobile Device Support, and Apple Application Support and then redownloaded the latest version of iTunes which reinstalled everything I uninstalled and I was able to sync my 1st Gen iPad and my 3rd Generation Nano with iTunes 11.1

  • How can i connect my ipod nano 7th gen to my car?

    Hi, how can I connect my ipod nano 7th gen to my car with bluetooth? Since I only have onstar device on my car but no bluetooth device, do I need to buy extra device to connect my ipod ? And what kind of device I shall choose? Thank you!

    Check with the manufacturer of your radio and see if they have a compatible cable.

  • Can you connect and ipod nano 4/5th generation with and ipad to download music/update software

    Can you connect and ipod nano 4/5th generation with and ipad to download music/update software.
    If so how do you go about it and what equioment are you required to purchase.

    No you cannot.

  • Can I Connect an iPod Nano to Logitech Z-680 surround sound system?

    I want to know if I can connect my  iPod Nano 16GB to my Logitech Z-680 Surround Sound System.  I already connect my MacBook to the system by plugging into the three plugs in the back of the controller then those three plugs merge into one plug which I then plug into the headphone jack on the side of my MacBook.  Since the battery life of my MacBook is 2 hours, at best, Id like to use my iPod to play music.  I tried plugging in the plug that I use for connecting my MacBook into the headphone jack of my iPod but I could not get any sound.  The single plug seemed a bit small for the iPod.  There are, also, two other jacks on the Logitech Z-680 controller, which are located on the front of the controller.  One is for headphones and the other I am not sure.  It has a musical note symbol above it.  I have never used that jack before.  Any suggestions/guidance is greatly appreciated.

    This video guide should explain it:
    Guide
    I cannot see the video where I am right now, hopefully this helps. Unfortunately it's quite busy and difficult to answer your questions with the right research.
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • Can I use my ipod nano 4th generation 16 gb with an Itunes acoount that already has a ipod touch 32gb and an iphone 4 32 gb?

    Can I use a ipod nano 4th generation 16 gb on the same itunes account with a ipod touch 32 gb and a iphone 4 32 gb?

    Yes.
    (58619)

  • Can i use my iPod Nano 3rd gen data cable with iPhone 2G?

    I know you can't use the wall charger of iPod with the iPhone but can i use the usb cable? I broke my iPhone cable but i have an iPod nano 3rd gen data cable

    Thank you very much for the quick reply

  • Playing ipod nano through home sound system

    I want to play my ipod (nano) through my panasonic dvd player + sound system. Ive tried heaps of leads into every plug socket in the dvd player, but no tunes!
    What type of lead do i need?
    Where do i plug it into in the player??
    Do i just press play to start playing?
    Chukka
    ipod new nano   Windows 2000  

    Just to expand on what Chris said.
    The phono inputs of a stereo amp are designed to accept the inputs of a moving magnet (or sometimes a moving coil) phono cartridge on a turntable. These are low output devices and so the phono input is engineered to amplify the signal.
    A line level output such as the iPod doesn't need such amplification and so, if you connect the iPod to the phono input of your stereo you will overload that input. The sound will be distorted and in many instances may cause damage to the speakers. The phono input is for turntables only. Connect the iPod to a line level input as previously mentioned.
    The reason you will get a better sound from the iPod when connected to a stereo and using the line out port from the dock (and not the headphone jack on the iPod itself), is that the headhpone socket is powered by a low quality amp. It's meant to drive an easy load like headphones and not the input of a stereo.

  • I don't have a PC or Mac. I have an iPad with iTunes and music. Can I connect my iPod nano to my iPad and sync music to my iPod?

    Can I sync music from my iPad to my iPod?

    If you have an Apple Store, near you, make an appointment to take it to them. If it's not a hardware failure, they may be able to help.
    Regards.

  • Can I have 2 ipod nanos on same computer but with separate itune libraries?

    Have both ipods installed on my pc but want to be able to download songs separately into my ipod and my daughters ipod.

    Also these articles...
    Using iPod with multiple computers
    http://docs.info.apple.com/article.html?artnum=61675
    Managing content manually on iPod
    http://docs.info.apple.com/article.html?artnum=61148
    iPod: Frequently Asked Questions
    http://docs.info.apple.com/article.html?artnum=60920
    Patrick

  • How can I sync my iPod nano 6th generation to iTunes with no Mac or pc, only iPad and iPhone 4s

    Please help!

    You can't. You need a computer of some sort to sync any of those devices to iTunes.

  • Can I sync my iPod nano directly with my ipad min?

    Can I sync my iPod nano to my ipad mini with out a computer?

    No......syncing requires a computer.  Backups can be done via iCloud.  What exactly are you trying to do?

  • Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5

    Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5 to iTunes to sync my music. Can anyone please help me ?

    Hey zoelevi_13,
    Here is an article that will help you troubleshoot this issue with your devices not being recognized by your computer:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID

    Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!

    Search your email for the word Logic (and set the search to All) and you should find the receipt (so long as you didn't delete it)
    Other than that.. simply contact Apple directly and ask.. Make sure you have your transaction details ready for them as they will need it...
    http://www.apple.com/contact/

  • ANYONE KNOW WHAT I CAN USE TO CONNECT MY IPOD NANO TO AN AUX DEVICE SO I CAN LISTEN TO MY MUSIC THROUGH MY STEREO

    ANYONE KNOW WHAT I CAN USE TO CONNECT MY IPOD NANO TO AN AUX DEVICE SO I CAN LISTEN TO MY MUSIC THROUGH MY STEREO

    Are these messages in the Sent mailbox? If not, they're not coming from your computer.

Maybe you are looking for

  • How to create multi-frame window

    What I want to do is to create a regular application window that has three frames, all divided by shared borders. To further explain what I need, please envision your typical mail client. You have a folder-tree pane, an email list pane, and an email

  • Schema not getting picked

    Hi friends, After creating calculation schema , the schema is attached to document type in variable calculation schema for services. Still the document is not picking the attached schema. It is picking RM0000. Any mistake in configuration?? Pl advice

  • Where has my atv (1 & 2) gone to in iTunes?

    I just got an atv2 & set it up on the wifi network. Took the atv1 & moved it upstairs to another tv. Itunes will not recognize the original atv, but it still has all the material & recognizes the network & iMac. Atv2 streams all out from the iMac, no

  • Bonehead layer mask question:  CS5

    I am new to photoshop. I am running PS CS5 on a Macbook Pro. I have a document with two layers. The top layer is a black & white adjustment layer with mask. Opacity is set to 50% The bottom layer is a colored background layer. I don't know what the l

  • BW Workspace in Analysis Office

    Hello fellows, I am evaluating the workspace function for Analysis Office. AO Client is on version 1.4.8.3163. I have already a BW Workspace defined and tested successfully the upload of a Local Provider and combination of a Local Provider with the C