Can I connect my lightning to USB to a travel adapter?

I have a travel adapter model: TC28SA. I used it to charge older iPods with a 30-pin charger. Can I also use it with my lightning to USB?

I do not know what adopter you are talking about. However, if the adopter has a standard USB port then that can be used to charge your iPod via the Lightning/USB plug.

Similar Messages

  • Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Yes, if the drive is formatted in Mac OS Extended (Journaled).
    The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

  • Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

  • Can I use the lightning to USB cord with any USB/AC adapter?

    Just got a new IPhone 5.  Can I use the lightning to USB cord with the AC adapter I had for my IPhone 4 (or any other USB to AC adapter)?

    Yes I just check and the one for my MacBook fits my 12 Watt iPad charger.

  • HT4101 I can't use my lightning to USB camera adapter to connect my new Sony Cybershot DSC-W730 to my new ipad Air. It says the connected device needs too much power. Any ideas what to do?

    Has anyone a solution to my newly purchased lightning to USB camera adapter not connecting my Sony Cybershot DSC-W730 to my new ipad Air? It says the connected device requires too much power.

    Use the camera's SD card.
     Cheers, Tom

  • Hi, im trying to download pictures from my camera but when I connect the lightning to usb camera adapter i get the message that there is too much energy required to support the device, can anyone help me?

    Hi, I´m trying to use the lightning to usb camera adaper, but I get a message that ¨there is too much energy needed to support the device¨, so I can´t download my pictures, can anyone help me?

    This discussion may help.
    It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
    Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
    Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

  • Can i use the lightning to usb camera adapter for sony cybershotdsc-w380

    DDoes anyone know how to use a lightning to sub camera adapter for a Sony cyber shot doc-w830

    This discussion may help.
    It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
    Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
    Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

  • Mobile phone Can't connect to the Notebook Microsoft Virtual WiFi Miniport Adapter

    1. Create Microsoft Virtual WiFi Miniport Adapter 
              1.1 netsh wlan set hostednetwork mode=allow ssid=NETWORK key=password keyUsage=persistent 
              1.2. netsh wlan start hostednetwork
    2. Connect Network Sharing--open
    3. phone using wifi to connect the network
    can't connect ,wha's wrong? notebook can surf through Ethernet connection.
    If i set a static ip in the mobile phone which is the same net section like the Microsoft Virtual WiFi network, DNS:8.8.8.8 . Then can connected, but can't surf, anybody can give me some helps?
      Ethernet connection:
    1. ADSL dail mode
    2. Static IP is setted
    3. DNS is setted

    Hi midource,
    Please update your wireless network adapter driver for good measure.
    Check your phone connection properties see if it could get IP address from your computer properly.
    Static IP doesn’t mean your phone has connected to network, if you set static IP the connection will show connected but without internet.
    This issue could be caused by incompatible hardware with Virtual Wifi Miniport Adapter hotspot, especially on some android devices.
    But we still could do some configuration changing and give it a try.
    Check properties of your adapter Ethernet connection->sharing, check “Allow other network to connect through…” and “Allow other network users to control…”
    Tight click Ethernet connection-> properties->Advanced (advanced settings might be different depends on WIFI adapter manufacturer)
    Disable 802.11n mode
    Disable 40 Mhz Bandwidth Compatibility Mode
    Run Netsh command you mentioned above as administrator.
    Disable firewall temporarily.
    Check your issue again after re-enable your Virtual Wifi Miniport connection.
    If the issue still persists
    Please try other devices on your Windows 8.1 Virtual WIFI Miniport Adapter hotspot. If they works check compatibility issue with your phone manufacturer or set a router for network sharing.
    Regards
    D. Wu

  • Can i connect to a 'belkin USB Hub' so i can print and save images direct from my ipad 2..

    I have just bought a 'Belkin USB Hub' so that i can have my printer and external hard drive in a home office rather than carting them around the house or having to sit in my back room when i want to print from my mac lap top, works fine , but my question is, is it possible to connect my ipad 2 to the hub so i can edit and print directly from that rather than having to re-sync to my laptop.

    The only solution to enable printing with the iPad is via WiFi or by using one of the HP AirPrint compatible printers.
    AirPrint-enabled printers
    HP Envy e-All-in-One series (D410a)
    HP Photosmart Plus e-AiO (B210a)
    HP Photosmart Premium e-AiO (C310a)
    HP Photosmart Premium Fax e-AiO (C410a)
    HP Photosmart e-AiO (D110)
    HP Photosmart eStation (C510)
    HP LaserJet P1102w Printer
    HP LaserJet P1606dn Printer
    HP LaserJet Pro CP1025nw Color Printer
    HP LaserJet Pro M1212nf MFP
    HP LaserJet Pro M1213nf MFP
    HP LaserJet Pro M1214nfh MFP
    HP LaserJet Pro M1216nfh MFP
    HP LaserJet Pro M1217nfw MFP
    HP LaserJet Pro M1536dnf Multifunction Printer
    HP LaserJet Pro CM1415fn Color Multifunction Printer
    HP LaserJet Pro CM1415fnw Color Multifunction Printer
    HP LaserJet Pro CP1525n Color Printer
    HP LaserJet Pro CP1525nw Color Printer
    HP Officejet 6500A e-AiO
    HP Officejet 6500A Plus e-AiO
    HP Officejet 7500A Wide Format e-AiO
    HP Officejet Pro 8500A e-AiO
    HP Officejet Pro 8500A Premium e-AiO
    HP Officejet Pro 8500A Plus e-AiO
    If you don't own of these printers you will need a third party app that will allow you to print. Print n Share, Print Central, and others are available in the App Store. Some of these apps will work only if your computer is turned on and may need a helper app for the computer as well. if you have a Mac you can use Printopia. The computer must be on for this app as well. Print Magic has been mentioned on this site a few times. Google or check the App Store.

  • Can't connect to printer via usb print server

    So I've tried to connect to an EPSON stylus printer from my iMac via a print server with no success.
    Here's some info to help focus the questions/help:
    iMac running Mavericks, Epson SP R200 printer, Belkin Play router, Toshiba Satellite laptop, Level1 USB print server
    Win8.1 laptop prints via print server just fineso IP, port, firewall issues on router/print server side are ruled out.
    I have the fire wall off on the iMac
    I've quadruple checked IP and subnet numbers of iMac to rest of network, and they all jive.
    I can pull up the config page of the print server via Safari on the iMacso connectivity is there
    I previously had the printer attached directly to the iMac, and successfully printed.
    I've tried to add the printer via IP > LPD method AND Advanced > Windows printer via spoolss
    I can get as far as adding the printer, but as soon as I attempt to print a test page the printer has a "filter" error, or some "color" error, the job just goes into nothingness, or the job just sits there and the que is paused.
    This is very frustrating to put it nicely.
    -Vince

    What driver are you using? - Don't know if you remember, but you had to be using Gutenprint, because Epson's driver for USB-only printers, only works via USB.
    http://gimp-print.sourceforge.net/MacOSX.php

  • Tried to update device software, now can't connect to device via USB

    I tried to update my 8100 to the 4.5 software.  I first updated the desktop software to 4.7, then tried to update the device, but the process failed.
    Now, when I open desktop manager it shows as not connected to the device.  I can go into the device mamager properties and select the balckberry, but when I return to the destop amanger it says no device.
    It appears that whatever I do it does not recognise the usb device.
    The display on the 8100 is only text, no graphics or phone company info, and it is basically inoperable.
    There are options on the display for some applications, but if I choose them, it says app not found.
    Is there a way to force an update to it?  Or have I poohed this phone?
    Thanks in advance
    edit:
    I have pulled the battery on the unit to reboot it, and have tried going back to an older revision of desktop manager
    Message Edited by gw22 on 12-05-2008 04:22 PM
    Solved!
    Go to Solution.

    1. Unplug the BB from the USB and PC. Reboot the PC completely from off.
    2. For the BB, you might not have loaded back the Theme that was in use on the device when you upgraded, which will normally give you a black/white screen. You need to follow the instructions below.
    You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
    http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    If JL_Cmder does not work, follow this instructional:
    http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help:LINK can't connect to q10 via usb

    new q10 connect to computer，the q10 can be  charged  and see the extension of the SD card on computer,but when open blackberry  link,it can't find the device of q10.i have change 3 pc,It is all the same situation.
    if pc and q10 in wifi ,blackberry link can find q10,and sync the data.
    How to explain the situation，will be the USB interface problem?

    it is this situation,do you know the reason?

  • After upgrading Flame device to 2.0 production, can't connect to device via USB. Is there any hidden step I missed?

    Hi guys, I upgraded mi Flame to FirefoxOS 2.0 following the guideslines on https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame.
    I updated to 'latest v2.0' of production builds. It rebooted normally and I checked out version improvements, but I now I can't access the device via adb or fastboot or throught Web IDE.
    I selected ADB and developer tool for USB debugging and nothing. Only ADB and nothing.
    I even tried factory reset but It kept v2.0 and no adb connection :(
    Any suggestion?
    Thank in advance
    Héctor Fernando

    Hi hectorfhurtado,
    I encountered the same issue today when attempting to file and log some bugs for Firefox OS. I asked on the IRC channel #b2g and got the following response from Fabrice:
    "''known bug, should be fixed in tomorrow's update.''"
    I hope this information is helpful. Please let us know if you have any other questions.
    Thanks!!
    - Ralph

  • Can't connect to pinnacle 710-usb

    has anyone been able to encode from the pinnacle 710-usb?
    I've gotten other usb devices to work. I tried both a component and
    svideo connection from my device to the pinnacle but no
    luck.

    called a client that attempts to connect to Flash Media I. Server 3.5 through from Flash Media Live Encoder 3 and also not successful with Pinnacle 700-USB, we are in the same.

  • Officejet 5610 - can I connect it with the usb to a router home network, instead to connect to the c

    Hi, Is it possible to connect Offcejet5610 with usb to a router home network, instead to a computer?

    Yes, if the router supports USB printers (not just hard drives).  Also, the only function that will be supported will be printing, nothing else.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for