Can I connect my OfficeJet Pro 7590 to my home WLAN?

Is this possible and do I eventually need some kind of device like an USB-stick similar to the ones connecting TV's with DLNA and Smart TV with WLAN?

No, you can't really add a radio and antenna to the printer, sorry.
You could move the router or move the printer. Another idea is to buy a powerline Ethernet kit for about $75 to use your home's power lines to transmit Ethernet. Look at the Netgear Powerline AV+ 200 Adapter Kit (XAV1501). About $70 from Amazon.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Can any one tell me how to connect my Officejet Pro L7680 to my network

Can any one tell me how to connect an Officejet Pro L7680 to my network

Hi,
Setup guide is in the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=2512009&
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running fine for everything else and I have entered the static address for the printer into the router. It appears that my printer believes it is connected to my WiFi (Ihave WPS it multiple times), but when I type it's IP address into my IE nothing shows up. My router doesn't appear to see the printer either. I have the latest driver installed on my computer. I suspect this may be a router issue: new router Asus Double 450 Mbps N Router (Dual band - but it appears my router is using the 2.4Hz band to communicate with WPS). Windows 7 64.
Any help is appreciated!
This question was solved.
View Solution.

Hello NRHII,
Welcome to the HP Forums!
I understand you're unable to connect the Officejet 8600 over a wireless connection. I will do my best to assist you! I would recommend power cycling the router, printer and computer:
1) Turn off your printer
2) Disconnect the power cord from the back of the router
3) Restart your computer
4) Wait less than 60 seconds, plug the power cord back into the router
5) Turn your printer back on, wait for the computer to turn on
Is the wireless light blinking on your printer? If so, please reconnect the wireless on your printer by using the wireless setup wizard: (This information is stated here.)
On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
Touch the Setup icon ( ).
Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks.
Touch the name of your network, and then touch OK .
If prompted, enter the network password, and then touch OK . The printer connects to the network.
Also, as I was typing this post TreeFrog posted some great information to follow.
Have you followed this entire HP document on Printer Does Not Maintain Wireless Connection? If not, follow this document. Please post your results, as I will be looking forward to hearing from you.
Have a great day!
I worked on behalf of HP.

HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

How can i connect mac book pro to appel tv3

How can i connect mac book pro to appel tv3

To do what? It's not clear from the question.
If you want to play iTunes library content on the unit you need to enable Home Sharing on both, have them on the same network and then look for your iTunes library under the Computer icon - iTunes must be running of course.
Communications can be blocked by firewalls or security software sometimes.
To factory restore a black AppleTv2 or 3 you connect it to the computer running itunes with a USB to microUSB lead alone and start itunes.
AC

Windows laptops can't connect to Macbook Pro shared internet when WEP security is on

As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on. My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required. When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password. The same thing occurs on my Asus Netbook running Windows XP. Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products. I want my MacBook Pro to save me from needing an external router.

I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
These links may be useful:
AirPort- Joining an encrypted WEP or WPA Wi-Fi network
AirPort Express- Difficulty joining 3rd-party network that is using WEP

Can't connect HP Officejet 4255 to Airport Extreme

I can't connect my officejet 4255 with the newly bought airport extreme base station. Anybody help?

In System Pref. on your Mac, under Printer Setup Wizard (it may be in Utilities, Im not 100% sure - just check both) when you click on Add Printer (or the '+' sign) click on Bonjour printers, and you should see your printer there (make sure it is connected to your AEBS via USB first)

Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv?

Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)

The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR.

Can't install Acrobat 9 Pro on Windows XP Home Ed V2002 SP3

Newbie hozer can't install Acrobat 9 Pro on Windows XP Home Ed V2002 SP4. At end of install via CD it hangs restarting Print Spooler (spooler) and Windows Image Acquisition (stisvc) services, err 1920, and all I can do is click Cancel and it uninstalls the whole dad gum thing. I tried kb.adobe.com/cps/403/kb403613.html. Not fixing it.
If I could change the permissions on those services maybe that would help but I can't do it, I don't have a login with enough permissions, I guess...
So after the third time I just hard-crashed the hard drive when it got to the last ("can't start Windows Image Acquisition", cancel/retry) window and I did end up with the files on the HDD but... they won't install or delete now. I'm infested. Try to install in Normal or Vega mode, it now pops up a filled in userid/serial number box, and when you click ok or retype it, it says the s/n is invalid. I keep having to reboot to get Windows Installer to let me start it (another permissions problem). So I'm stuck. UpToDateTrendMicro doesn't find any evil doers... the kb403613 sent me to this forum,
with hopes,
M3/ [that's MEL, or as close as the ScreenNameBouncer would let me get]

Not sure it will help, but try it when logged in as the administrator and with anti-virus turned off. As far as error numbers, must of us have no clue (there seems to be a list at Adobe, but we don't work there.

How to connect HP Officejet Pro 8610 to a Laptop that's not connect to the internet

Just bought the HP Officejet Pro 8610 all-in-one for the local Historical Society. Neither the laptop nor the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.
I have just removed the instruction manual to familiarize myself with the connecting procedure but I notice there are several references that require internet access.
Is there a work-around that allows me to install/connect the printer without requiring access to the internet?
Thank you in advance for your help.
This question was solved.
View Solution.

Hi,
How many computer will be using the printer ? If only one the USB (you may have to buy a cable) is the way to go. You can also use wireless direct to print but this is not reliable:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00577405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Connect an Officejet Pro Plus 6500 to a new mac running Yosemite

If you are having a problem connecting an HP Officejet Pro Plus 6500 to a new mac running Yosemite, (10.10.1) this is what to do.
Go to HP and get this driver
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4182&lc=en&cc=us&dlc=en&s w_lang=&product=4323648#N191
Run application:
If you don't see your printer listed (and the progress bar goes about half way (but just seen to stay in the same place without finishing up) - hit the manual button and type in the ip address. It can be found on your printer by going to SETUP (in printer window) then to Network then to VIEW NETWORK SUMMARY then to WIRELESS. You will then see the IP address you need to type in manually.
Type it in and continue to follow instructions to put the driver.
Hope that helps.

See this thread
HP Officejet 6500 E709n Wireless

No wireless connection to Officejet Pro 8000 printer

This used to work, though occasionally the connection went down. Now nothing at all. I have Windows 7, trying to connect to an HP Officejet Pro 8000 Wireless printer. Neither has been updated recently as far as I know, and there has been no reason for network or firewall changes that I am aware of.
The printer will produce its three page report, and everything passes ("No problems found", connected to correct network, etc.). I can connect to the printer via USB and print out fine. I have tried rerunning the connection software; it finds the printer (presumably via the USB connection), but then says:
"Your computer is unable to communicate with your printer at 192.168.1.73. This may be caused by firewall software. If you are using firewall software, verify that UDP port 427 is unblocked for both inbound and outbound traffic.
Your PC can not communicate with your printer at address 192.168.1.73. Check all cable connections. Check that the printer, PC and router are powered on and connected to the network."
My Windows firewall is set to "display a notification" when it blocks something, and that has not happened when the software is trying to connect, so it does not seem to be the firewall (and the software should set that up itself anyway). There are no cable connections - I am connecting wirelessly. Everything is turned on. The PC (192.168.1.67) can connect to the router (192.168.1.254) fine. I have tried pinging the printer from a laptop also on the network, and that fails too.
I have restarted both the printer and the PC.
The wireless network has WPA-PSK authentication, but the password has not been changed.
I have tried running the HP Print and Scan Doctor. It tell me my computer is connected (thanks, I already knew that) and that to connect the printer I need to run the "wireless setup" software (thanks, I already knew that). So that was a waste of time...
When do I go from here?

From what you describe it is possible that the router has a network firewall which is blocking the communication with the printer. I am going to include a image which contains the ports which have to be open on that firewall, you may have to contact the router provider to achieve this.
Another thing to note is that sometimes you get better network success through installing the printer with the USB cord and then performing the USB to Wireless setup witch directly borrows the authentication of your computer.
Let me know how that goes and I will get right back with you!
-Spencer

Problem Connecting HP OfficeJet Pro 8500 a909g to Wireless Router LinkSys EA6300

Hi- Please help. I just got a new computer and am trying to set up my printer wirelessly to connect to my computer. With my old computer, I had it connected via a wired usb connection because I could not get the wireless setup to work. I would like to get the wireless figured out now that I have multiple devices.
I tried to connect my printer (HP OfficeJet Pro 8500 A909g) to my wireless Router (Linksys EA6300), followed the prompts 'Setup -> Network -> Wireless Setup Wizard' on the front pane of the printer. It was unable to find my wireless router. I tried putting in my router name/SSID and WPA password and it still cannot locate the router. I am assuming this is a router setting issue, but I am not sure what to change to get my printer to be able to find the router for the wireless connection. I would really appreciate if someone could help me.

Hi,
To better understand the issue, can the printer see other networks in your area? can your PC see multiple networks or only your router's SSID (in order to deny any issue with the wireless radio of the printer).
As I can see the EA6300 is a dual band router.
The first thing to check is that your router being set to broadcast a wireless signal using the 2.4GHz band, the pritner doe not support the 5.0GHz band and will not see a router configured to broadcast in such a band.
As well I would ensure that you do not have any other device which broadcast the same SSID as your router, as your router more likewly configured to broadcast both 2.4 ang 5.0 GHz bands (As a Dual Band router) I would also ensure that a different SSID being set for each band (e.g. home_24 / home 5)
YOu may contact the router service provider for further assistant with your router configuration, you may also try following its user guide below:
http://downloads.linksys.com/downloads/userguide/1224698309670/EA6300_combo_PDF_En-FrCA.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Now really can't print from Officejet Pro 8600 Plus

This is my second attempt to get help. The first help made it worse. I had been unable to print from my wireless printer from my MacBook Pro, iPad, or iPhone. After about 20 hours I got it to print from a cable (it sees my network but none of my devices can see it). So I posted here asking for help and was told to uninstall the software, repair disc permissions, and reinstall the software. But when I downloaded the new software my computer would not install it because it says it is for Mac System 10.7 or less and I have 10.10. So now I can't print anything at all. I need this for work. Please help me fix it for real. I can't take this any more.
This question was solved.
View Solution.

Thanks for providing that information JeanneS1. I have provided some more information that should help us resolve this issue. I know you have already spent a lot of time on this, but I am willing to continue trying to get this working properly over the wireless network.
Power cycle the router, restart the Mac and the printer.
I would print off a Configuration Page to see if the printer still has a valid IP address.
Try to access the printer's Embedded Web Server. If it connects then the printer is still on the network.
If you don't have a valid IP address, once more run the Wireless Setup Wizard on the printer.
Setup a Static IP address for the printer, this way the router will always assign the same IP address to the printer. Which should stop the disconnection.
Here is a document on this issue. But for now just follow Solution two: Assign the printer an automatic static IP address under Mac. Printer Does Not Maintain Wireless Connection.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and delete the old driver, click the + sign to add the driver, you might have to click the drop down to select the printer's name to add it in. (Officejet Pro 8600 Plus)
Here is a screen shot.
Then test the printer.
You might need to update the printer's firmware if you haven't already.
How far is the printer from the router?
Here a few causes of why the printer can lose the wireless connection:
The recommended distance between the printer and the router is 1.0 meter to 1.5 meters (3 ft to 5 ft).
A nearby device that emits radio signals (such as a microwave or cordless telephone) might interfere with the wireless connection.
A virtual private network (VPN) prevents the printer from accessing the computer and wireless network.
The network connection is no longer active, or has low signal strength.
The printer goes into sleep mode or standby mode.
A firewall prevents the printer from accessing the computer and wireless network.
What kind of router are you using?
What kind of security are you using? (WPA2/WPA, WPA Personal, WEP)
What band is the router set to? (2ghz or 5ghz)
I believe by changing these settings on the router will help with this issue if it continues. You might need to contact the router company to make those changes.
Make sure that on your wireless modem, the channels for 2.4Ghz and 5Ghz are fixed and are not set to automatic !!
Select channel 6 for 2.4Ghz and channel 36 for 5Ghz frequency.
Hope this helps get you up and running again.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Connecting HP Officejet Pro 8600 to Verizon JetPack 4G-LTE

Hi, as you can probably guess I am trying to connect my HP Officejet Pro 8600 to my wireless Verizon hotspot. I have tried to use the "Wireless Setup Wizard". When prompted I chose the correct network, and entered the correct password. After some time the printer displays:
Connection Successful
IP: No Link
Network Name: Not applicable
followed by a Hostname and the MAC address of the printer. When I try to view the wireless connection the window states that I am not connected (as suspected). I then printed the "Wireless Network Test Results". It reports "No problems found. Congratulations on the successful setup of your wireless printer." and everything under the "Diagnostics Results" section passes. Under the "Current Configuration" section the correct SSID is displayed, however the IP address comes up as 0.0.0.0 (which means I am not connected?).
Also, I checked the Jetpack's configuration page and the MAC filtering is disabled.
Is it possible to connect this printer to a Verizon Jetpack (MiFi)? If so, what am I doing wrong?
This question was solved.
View Solution.

It looks like the printer is connecting to the network, just not receiving any IP information.
I will provide the simplest solution that typically resolves this issue. To receive the best results, be certain to follow them in order.
1. Power off the JetPack.
2. Disconnect the power to the printer while it is on for 1 minute.
3. Power on the JetPack and wait for the network connection to come back up. This can be easily identified when other devices start connecting to it again.
4. Reconnect the power to the printer and wait for the home screen to finish loading.
5. Press the antenna icon and select Settings.
6. Scroll down and select Restore Network Defaults.
7. Once that is completed, reconnect the printer to the network with the Wireless Setup Wizard.
DHCP, dynamic host configuration protocol, is responsible for assigning IP information to devices automatically as they connect. It is possible to connect to a network without DHCP, there just won't be any communication unless IP settings are set manually.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Can I connect my OfficeJet Pro 7590 to my home WLAN?

Similar Messages

Maybe you are looking for