Can I connect my Zen V Plus to a PC without MediaSour

I would like to connect my Zen V Plus to my computer at work but I'm not allowed to install any "unapproved" software, and Creative MediaSource definitely falls under the "unapproved" category. Is there any way to access the player through the USB port with standard Windows drivers?

I've been trying to put 2 small video clips on my V plus and i have no soft wear but i can still plug in on this computer. but everytime i try to put the video on it either won't let me or it says it had problems trying to play it on my v plus. I'm using window's media player to sync the videos onto it. should i change the file type or what? Please help.

Similar Messages

  • I can't connect my iphone 6 plus to Itunes store and app store, what will I need to do?

    I can't connect my iphone 6 plus to Itunes store and app store, what will I need to do?

    In my case, i just go to Settings->Itunes & App Store and Sign Out and Sign In again. Then enable all Automatic Downloads (Music, Apps, Books, Updates).
    PS: Enable all automatic downloads may not be necessary.
    Good luck.

  • How can i connect my iphone to a new itunes library without losing my contacts and photos ?

    how can i connect my iphone to a new itunes library without losing my contacts and photos ?

    Is the new iTunes library on a different computer, or the same computer?
    Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
    Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

  • Can't power on Zen Nano Plus

    I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

    I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
    Message Edited by joenanoplus on 2-26-200608:32 AM

  • I want to connect my zen v plus!

    I have one , but then i want connect?it, computer see zen v plus but ZEN V Series Media Explorer say that mp3 plaeyr isn't conected . What i have to do?

    Hey guys, I got a few suggestions. First try rolling back to WMP0 if you have ,? and then reinstall . If this doesn't work, try reinstalling the drivers. And finally, check my post history?for a thread entitled "For those having trouble getting their Zens to be recognized". You may find better information there.

  • I can't install the Zen nano Plus software on my pc. He

    Hi,I've read some people have the same problem I do, but no solutuion. When I try to install the zen nano plus cd that came in the package, it comes up with a window saying : "the windows operating system running on this computer is not supported by this product". The nano plus is supposed to work with windows ME which I have?and I think I meet all the other requirements. Could they have mislabeled a cd?I tried installing it with the antivirus turned off with ca antivirus. Thanks for any help,Joe?

    I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
    Message Edited by joenanoplus on 2-26-200608:32 AM

  • Computer can't connect to Zen MicroPhoto. Strange sou

    When I connect my Zen MicroPhoto to my computer's USB port and turn on the Zen Micro Media Explorer, it'ssaid my device is not connected (although it had). And usually?when you connect a USB device, there's a high-pitched beep followed by a low one, but with my Zen it is 3 low beeps consecuti'vely. I've already tried other USB device (my thumbdri've) and it works and sounds normally. Any suggestions?

    Run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can we connect another system say SRM,BI with persona(without add on)

    Hi ,
    I have installed SAP Screen Persona's in one my  ECC system ,so can I connect the sap persona's to other landscape system for  ex  SRM ,BI etc without installing any add on it ?As in same ECC system one system we can take main system and other as target system so can i take a SRM system as target and persona's will work on it.Kindly clarify  Sushant Priyadarshi   any comments.
    Thanx
    Niti

    Hi Niti,
    In config guide for Persona 2.0 under the section maintained system SAP has clearly mentioned that you can make your one system for ex (ECC) as a source system and then connect your other system as a target by maintaining logical system in SPRO only prerequisite should be your SAP kernal should be 7.21 or 7.40 or higher
    Follow the procedure for the SPRO configuration and after that just do the below configuration
    Maintain the following parameters under System Settings:
    o Service.Uri – Maintain the service name for accessing SAP Screen Personas
    here. The default service is /restgui.
    o Server.Url – Maintain the server link for the system here. For example:
    https://ldfss600.pal.ess.corp:50015
    Go thorugh the config guide for detailed steps by clicking below link
    https://websmp202.sap-ag.de/instguides
    Regards,
    Prasad Deshpande

  • Can't connect wirelessly to our WRT54GX4 after a time without rebooting the router

    Hi,  We have 2 of these routers and can't connect wirelessly to them after a period of time (unknown length at this point) until we reboot the routers.  We have some printers cabled to one and a PC to the other.  Both loose their ability to allow wireless communications after a while.  We reboot them and they work fine.  Is it a setting that I can't fine?
    Thanks
    Mike

    hi...first off, ensure that the routers have the latest firmware installed....then try changing the wireless settings on the router
    ssid - any non-linksys name
    channel - either 1 or 11
    enable encryption
    beacon interval - 50
    Fragmentation threshold - 2306
    RTS threshold - 2307

  • How can you connect your iPod touch to your Vista computer without using Apple Software

    How do you connect an iPod touch to your Vista computer without using any Apple products

    There is no other legit way to sync your iPod than using iTunes. There is 3rd party software to transfer content from the iPod to your computer, but not from the computer to your iPod.
    Disk mode is not supported.
    See also: http://www.apple.com/ipodtouch/specs.html

  • When I connect my Zen V Plus to my computer, it doesnt show I have it connec

    As the title says, my computer can't read that I have my v plus connected. I am using windows vista, and am very disapointed that I can't do any thing with my new mp3 player. Any one know why it would be doing this?

    I have the same problem, when i connect my zenvplus mp3 player all it dose is loading the battery, but my computer cant find it... So i looked in to the manual and on the first page they said "DO NOT connect your player to your computer befor setting up the software" and guess what? I did connect it to charge the battery so they would be full when i started the installation of the software. I have tryed uninstall the software and follow the manual but the same outcome. So i jumped over to a friend of mine that have the exakt same player and pluged it in there with my usb cable (I used my usb cable so i would know that it wasent wrong with it). And it worked all fine, no problems at all. Oh, btw, i use windows xp not vista...
    I called the (Sweden) support line but they where closed, but the message whas so bad i could not realy hear what time they where open, guess i have to try tomorrow.
    So what can i do now? Reinstall the windows? Becos reinstalling the softwhere dident to the trick...
    Message Edited by MoonDoggie on 07-6-200709:44 PM

  • ITunes can't connect to remote speakers PLUS Airport Express p/word problem

    I am running iTunes 7.4.1 and have previously been able to play iTunes through remote speakers via an Airport Express . After upgrading iTunes some time ago, I am unable to connect to the AE any more. The AE shows as an option in my iTunes window, but when I select it from the drop down option box bottom right, it just doesn't choose it.
    I have read other discussions pertaining to this, and have followed all of those solutions, but to no avail.
    I have done a hard reset on the AE restoring it's factory settings thinking I should just start again, and it has been renamed "Base Station Oa369f" so I know this has worked, but when I try to reconfigure it through Airport Utility, it asks for a password. I tried it's old password, and also tried the generic one "public" as stated in the AE setup guide, but it rejects both.
    I am keen to figure this out as I'm about to buy a new printer and another AE so I can print wirelessly, but don't want to have the same issues if it's an AE bug that can't be fixed, I would be left with no printer!
    I know this is two quite separate problems, but if anyone has any ideas for either I would be really grateful.
    Thanks very much

    I have exactly the same problem which has been driving me nuts for the last couple of days. However I am able to access the dropdown list of speakers. I have mine set to multiple speakers, and now it WILL play through my Airport Express again, but only when playing through the internal speakers at the same time. When I try to play solely through the Airport Express it just hangs.
    Come on Apple, you need to be regression testing your upgrades far better than this, for something so basic to go wrong.

  • XP can't read my zen nano plus

    can anyone help? i just bought this thing, and XP is totally not seeing it... what can i do?

    MicheleZ,
    I think your problem lies with the music provider and not just the player mainly because you mention your computer can't playback those tracks now. Most likely your license for playback has ended or there's some problem within your computer. Are you currently still subscribing to Rhapsody service? Which Rhapsody service did you subscribe to The player wouldn't work with Rhapsody To Go services.
    Jason

  • My ipod shuffle is connected to another library that is no longer in use. How can I connect it to my library on my computer without erasing all the songs it presently has?

    My son downloaded songs onto my ipod shuffle from his friend's computer but I have no access to that computer. When I try to connect to my library from my computer I get a message saying that in order to sync w/my library I have to erase all content. Is there any other way to connect this shuffle w/out erasing all these songs?

    HELPPP ME BEFORE CHRISTMASS MORNING!!

  • Zen V Plus and USB Connect

    Hello everyone. First off... I love the look, feel, and design of the Zen V plus. I'm hoping to eventually get to compliment the actual functionality of it. It has been a long day of hurry up and wait since I sped off to Circuit City early this afternoon for the Zen V plus. I'm just DYING to test it out, but it seems there is a major stumbling block. Let me give you a step by step run down of what has gone on since I can't seem to find a solution in the other posts I've read:
    I put the installation disc and successfully installed the software on it.
    After installation, I connected the zen v plus to the USB port and it wasn't long before I saw the battery symbol, complete with lightning bolt to show that it was charging. I also noticed that it was "docked", and I saw the USB symbol on the screen of the mp3 player. The button lights were glowing on and off. No problems yet...
    I checked to see if you could sync songs while it charged - and it didn't recognize the player.
    Around the 4 hour later mark, it DID recognize the player, and allowed me to rip and sync my Maroon 5 CD. I decided to leave and let it charge fully before making any other attempts.
    I come home, and the mp3 player has been charging for approximately 6.5 hours. The lights are no longer flashing, and it has appeared to shut off, which I assumed meant it was done charging.
    I unplug - attempt to turn on - and nothing. It's dead. Now...it's not being recognized at all.
    I'm not good with electronics really, and never pretended to be, but something tells me the USB connection is weird. My brother owns a PSP - and sometimes it doesn't want to read *his* device either. I'm wondering if perhaps it did recognize the device long enough to give me confidence that it was charging, and then lost the usb connection at some point. (It's highly doubtful that my pc went into any sort of sleep/power save mode because there is almost always someone on the computer here.)
    For what it's worth, I am using WMP 0, Windows XP (service pack 2), and have tried ALL usb ports (front and back) to get some juice into this thing. The computer just won't recognize it now. I plug it in and hit the power button, and it won't show me so much as a sign of life.
    Any suggestions

    I had this exact same problem. you should see a little plug on the battery when its connected to the computer, you are seeing a lightning bolt because your V Plus has an old Firmware version on it. Head to the Support->Downloads section and download the latest (..03 I think). This fixed most of the problems I was having.

Maybe you are looking for