Can i connect pci-7344 to my third party motor and drive without umi-7764 ?

Our Lab have NI pci-7344 motion controller and third party motor and drive made by other company.
We want to connect pci-7344 and third party motor & drive without umi-7764.
Just use cable.
Can we succeed to connect them ?

In general it is possible to connect the PCI-7344 to a motor drive without using a UMI-7764 but you will loose some safety features and the level of noise immunity for encoder signals will be decreased.
Please have a look at this link for more information.
Best regards,
Jochen Klier
National Instruments Germany
Message Edited by Jochen on 01-05-2007 10:19 AM

Similar Messages

In FF8, how can i get FF8 to keep my third party extensions and addons enabled, instead of having to manualy enable 25 extensions and addons every time i start FF8?

New in FF8 is that 3rd party addons and extensions have to be manually enabled. But it is annoying to have to manually enable 25 extensions manually every time i restart FireFox 8. There are many addons that i consider important, like Adblock Plus, and would like these to be enabled automatically every time i open Firefox, instead of having to give it permission every time i open my browser.Please tell me if there is a way of keeping my addons and extensions enabled.

Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
* https://support.mozilla.com/kb/Installing+a+previous+version+of+Firefox
Create a new profile exclusively for each Firefox version.<br />
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Testing_pre-release_versions
<br />
''(in reply of a PM)''

HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

HI expects,
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

Hi,
In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
IDoc supports only Async communication and in Sync case performace is good using Proxy.
In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
Thanks
SaNv...

I have just downloaded OSX Mavericks and am having a lot of problems with my iCloud account. I get a message "this iMac can't connect to iCloud because of a problem with (and then it quoted my e-mail address) Does anybody know what the problem could be??

As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
I do this and no matter what I seem to do this message continues to return.
Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
Many thanks
Mike

Hello John
Sorry I haven't got back to you sooner.
Thanks very much for your help, your solution solved my problem.
Thanks again and kind regards
Mike

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

You would get better response from the iTunes community forum.
Have a nice day!

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Look up "screen sharing" in help
You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse. Choose your mac mini's name, and look for the "Screen Sharing" button.
Choose Apple menu > System Preferences, and then click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users:
Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users:
Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen:
Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password:
Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

Can I connect my Time Capsule wired to the computer and just use it as a back up

Can I connect my Time Capsule to my computer (wired) and just use it as a back up and not as a wireless router?

Yes, you simply bridge the TC..
Just google for it as we have posted the instructions endlessly.
The one trick that might be necessary is to ensure the TC is on a different IP range to the main broadband connection.
And make sure the gateway and dns do not cause issues.. so it is generally better to set static ip on the TC and the computer.
None of it is hard so ask for specific instructions if you get to the point.

HT4061 can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

AnaMusic wrote:
By Design you can only Sync the phone to One iTunes Library at a time...
Syncing & importing pics/videos in the camera roll are two entirely different things & have nothing to do with each other.
You can import iPhone camera roll photos/videos using any computer you want...this has nothing to do with iTunes or syncing.

Can we connect one R/3 to two BW systems and extract data?

Can we connect one R/3 to two BW systems and extract data succesfully ? kindly through light on this issue.
Thanks and regards.
Ankush Shejul

Of course you can.
Just have to have the RFC destinations in place and use the
CALL FUNCTION '....' DESTINATION '....'
commands in ABAP, check out the ABAP forums for more info.

I can't connect my iphone 6 plus to Itunes store and app store, what will I need to do?

I can't connect my iphone 6 plus to Itunes store and app store, what will I need to do?

In my case, i just go to Settings->Itunes & App Store and Sign Out and Sign In again. Then enable all Automatic Downloads (Music, Apps, Books, Updates).
PS: Enable all automatic downloads may not be necessary.
Good luck.

TS1398 My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

Try a soft reset or turn the device completely off then turn it back on again. Also you can toggle Airplane mode on for about 10 seconds and then turn it off. Sometimes that resets the radio signal inside the device.
A soft reset is basically holding onto the power button and the home button simultaneously together for about 10 seconds or until you see the screen flash and it should go completely black. Afterwards, tun the device back on like normally and see if that fixes the problem.

Third Party Process and Inventory

We are using the SAP function "Third-Party Processing". We are using the function in it's standard (SAP R/3 4.7).
The auditor now has the following issue: Shipping the goods starts after paying the goods. Out of this, while shipping the goods, we are the owner of them. In this circumstance the ship is our warehouse.
SAP does not allow an Inventory Management within Third-Party Processing:
"Since a third-party order involves a movement from the vendor direct to the customer, Inventory Management is not in any way affected. If you wish to document the movement in the system, however, you can create a goods receipt for the third-party order."
With the SAP functions in this scenario it is correct that the warehouse stock is not being impacted. This is a conflict with the opinion of the auditor.
Let me explain in detail what is wrong out of the view of our auditor:
For example we initiated the order of a customer in June and we have paid the goods in June. The shipment starts in June and the goods will arive in July. Due to the fact, that we are the owner of the goods on the ship, we have to increase the stock. This is the opinion of our auditor.
Does any body know, how to solve the issue? How do you manage Third Party Processing & Inventory?

Some auditors just dont understand the SAP process. Instead of talking to weak users, they should talk to SAP directly.
What about shipments from standard sales orders that are shipped end of June and do arrive at the customer in July?
When do you bill your customer? when the goods arrives there, or earlier? Depending on the Incoterms you may still be the owner until the truck is unloaded.
If you change your process and post goods receipt to your warehouse, then you show inventory where no physical inventory is, you posted a goods receipt without a physical receipt. I am sure the next auditor will not allow such therotical process.
Get together, IT consultants of FI and MM and SD, strong business people for the same modules and the auditor, and discuss and find an optimal solution.And let the auidor sign the decision paper!!! Very important, I recently had to convice German auditors because they had different opinion than the Australian and US auditors of the same auditing company (and the issue had nothing to do with local legal requirements).

Third Party Wall and Car Chargers for ZV

Hi all. I was wondering if anyone has had any experience with the third-party wall and car chargers that are available on Ebay? I just purchased a Vision: M yesterday and was wondering if I should purchase a bundle pack off of Ebay with a case, chargers, TV cables, and sync cable? Or if I should only purchase the skins off Ebay and get a genuine Creative charger? I love the unit already (I have been a Creative customer for 6 years) but fi've hours via USB is too long a charge cycle for me...
Any help is greatly appreciated.
Regards,
Fenian

encase makes a combo unit. can be used with USB port, with cigar lighter in vehicle, or 120V wall plug. Quality stuff!

Third party sales and individual purchase order MIGO DIFFERENCE?

Hi experts,
any difference between third party sales and individual purchase orders goods receipt(MIGO). What's the stock levels chages after goods receipt in both cases? How the system knows that its third party migo and individual purchase order MIGO? Can anybody clarify my question?
regards,
raju

Hi
In third party you will not be able to create automatic PO
The schedule line category CS settings in VOV6 order type NB, MM item category 5 and account assignment category settings as X and in VOV7 for TAS create automatic PO ticked will ensure PR creation only and not PO
As suggested by the other friend you need to run t code ME59N or ME59 for automatic PO creation but certain condition to be met
1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked;
2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked;
3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO;
4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
You have to run ME59N transaction manually or schedule this as a background job
Regards
Raja

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

Can i connect pci-7344 to my third party motor and drive without umi-7764 ?

Similar Messages

Maybe you are looking for