Can I connect the mini to an older G5?

Can I connect the new iMac Mini to an older Power PC G5 (3.0) and make the mini the dominant hard drive?

No you cannot mix PowerPC and Intel Macs in that manner.

Similar Messages

  • How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

    Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
    At the same time I need to output the streaming to a videoprojector.
    The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
    Do I need to use a different port for the projector? Should I buy a video card?
    Can't connect the camera via USB as that is too slow and it will freeze.
    Many thanks for all your help
    Best
    Faeve

    You might do better on a forum other than this one, which is "Using iPhone"

  • TS3308 why i can't connect the headphone to my iPad mini retina, to sound still coming out from the ipad

    I tried to restore already but still I can't connect the headphone to my ipad mini, but in the other device the headphone is working properly...

    is the connector inserted as far as possible?
    Is there anything blocking it from being inserted far enough?

  • Can i connect a "Mini DisplayPort to HDMI Adapter" to my macbook pro and t.v without having to buy the hdmi adapter?

    I have a macbook pro 13 inch running on mavericks 10.9.2  and i was wondering if i could just use the "Mini Display Port to HDMI Adapter" and connect it directly from my computer to my t.v? because i see a lot of people on youtube connecting the "hdmi adapter" to the computer first, then connecting a regular HDMI cord to the adapter, then lastly to the t.v........ Does it make a difference whether or not I connect a "HDMI Display Port" directly from the computer to the t.v without using a adapter to connect with a regular hdmi cord??? what is the adapter really for anyways???

    eric199398,
    without knowing precisely which computers the people on YouTube are using, it’s hard to say whether they’re taking unnecessary steps or not. You should be able to connect the Mini DisplayPort side of a Mini DisplayPort to HDMI adapter to your Thunderbolt port, and connect the HDMI side of the adapter to your TV’s HDMI port.

  • TS1741 Can I connect ipad mini to PC to put itunes on it from PC?

    Can I connect ipad mini to PC to put itunes on it from PC?

    iPad mini already has iTunes so the answer is no.
    You can use computer iTunes to sync music, videos, apps to your iPad mini.

  • How can i connect ipad mini wifi celluar to 2g internet plan, how can i connect ipad mini wifi celluar to 2g internet plan

    How can i connect ipad mini wifi+celluar to 2g internet plan

    Hello Sir!
    After weeks of testing, i found the solution of my question. It´s quiet simply!!
    1º iPhone (3G Internet acess) connected to Mac mini by USB or BlueTooth or WiFi.
    2ª in Mac mini must be activated in "Preferencias", "Compartir", the option "Compartir Internet",
         "Compartir Conexión desde":   iPhone USB  or  Bluetooth PAN
         "Con otros Ordenadores vía":  Ethernet
    3º Ethernet cable must be connected from Mac mini to Time Capsule !!
    4º In Time Capsule "Internet":  connect by:  DHCP
                                 "Network": bridged
    Nothing more!!!  Sooooo simply!!
    After this, Windows XP SP3 connect without problem over TC´s WiFi or Ethernet to the Internet!
    Also other Devices like IPad, or other iPhone, etc.
    Of course it can be a created a WiFi connection (PPP) between the iPhone and the Mac
    and it´s working to.
    But ALWAYS, by changing the connection mode, must be changed the Thethering mode.
    In- and Out-Going!
    Thank you for your help, no I made me a "small" TC expert...lol 

  • I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

  • My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

    My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
    Help!

    No, unless you are using a home theatre system already, your only option is to connect to the TV.

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

  • How can i connect the PO to Document No...pls help it urgent!

    Hi gurus!
    How can i connect the PO no. to Document NO. pls specify the tables and fields.. tnx!
    Regards,
    Mackoy

    Hi,
    the document no. that is attached to PO at tcode <b>ME23N</b>..what should i do?
    Tnx!
    Regards,
    Mackoy

  • HT1212 how can i connect the iPad to the iTunes if the iPad is locked

    how can i connect the iPad to the iTunes if the iPad is locked

    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht1808

  • Can i connect the NI 9401 to the 9162 carrier

    Hello, can I connect the NI 9401 to the USb-9162 carrier, instead of having to buy the cDAQ-9172 for just one Module ?
    ciao, grazie
    M. Petrolekas

    The NI 9401 is currently not supported for the USB-9162.  I don't know what application you have in mind but you also might want to consider some of NI's other USB devices such as the USB-6212/6, USB-6501, or any of the USB-622x or USB-625x devices.

  • Can I connect the 24" LED to a PowerBook G4?

    Can I connect the 24" LED to a PowerBook G4?

    Only by spending more money.
    http://store.apple.com/us/product/TY153LL/A

Maybe you are looking for

  • Why can't i get my screen to come back on

    when i use my ubs cord to restart my iphone a tab come on my computer screen saying the apple mobile device is not on. how do i get it to work. or do i know to take it somewhere?

  • Printing in Russian Language - after ECC 6.0 unicode upgrade

    Hello , Earlier users from russia are able to print in SAP 4.6C using SAPWIN Device type in russian language. but after unicode conversion and ECC 6.0 EHP 4 upgrade, they are not able to print in russian using SAPWIN. In print preview ,it is showing

  • ADOBE PHOTOSHOP CC 14.1

    Hi, I have Adobe photoshop cc 14.1 and how I can do installion repair ?

  • CTX_DDL.SYNC_INDEX  gives ORA-03113 error

    I am trying to use the CTX_DDL.SYNC_INDEX command in order to update the full Text Index on a table, which contains a word document as a binary object, but I get an ORA-03113 error every time I do this. I get the same error if the table contains an E

  • Drivers For win 7 ultimate 32-bit

    I have loaded win 7 ultimate 32-bit on my pavilion dv9000 and it works well but i still need 2 more drivers for base system devices can anybody help are there any vista drivers i can use ?