Can i connect the touchsmart 610 to a projector?

Hi 
I have bought a Touchsmart 610 and would lik to connect it to a projector. Is that possible and if so how do I do it? 
Best regards 
Karolina

you have to purchase video replicator to connect projector..
http://www.shopping.hp.com/store/product/product_d​etail/VY843AA%2523ABA
I work for hp touchsmart and i can try my level best to help you out..
what ever i post that would be my persnol opinion not HP's.

Similar Messages

  • Which connector is the IR out on the back panel of the TouchSmart 610

    I can't tell which connector is the IR out on the TouchSmart 610. Also, is there anyway to get a diagram of the backpanel that explains (or at least identifies) each connection on the back panel? Thanks. 

    The setup poster that comes with the unit should have all that, it's also available online http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lang=en&lc=en&product=5125741&
    Each of the ports on the back is also labelled.
    Note: only models with the TV Tuner option have the ir out port

  • How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

    Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
    At the same time I need to output the streaming to a videoprojector.
    The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
    Do I need to use a different port for the projector? Should I buy a video card?
    Can't connect the camera via USB as that is too slow and it will freeze.
    Many thanks for all your help
    Best
    Faeve

    You might do better on a forum other than this one, which is "Using iPhone"

  • My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

    My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
    Help!

    No, unless you are using a home theatre system already, your only option is to connect to the TV.

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • Can I connect the mini to an older G5?

    Can I connect the new iMac Mini to an older Power PC G5 (3.0) and make the mini the dominant hard drive?

    No you cannot mix PowerPC and Intel Macs in that manner.

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

  • How can i connect the PO to Document No...pls help it urgent!

    Hi gurus!
    How can i connect the PO no. to Document NO. pls specify the tables and fields.. tnx!
    Regards,
    Mackoy

    Hi,
    the document no. that is attached to PO at tcode <b>ME23N</b>..what should i do?
    Tnx!
    Regards,
    Mackoy

  • HT1212 how can i connect the iPad to the iTunes if the iPad is locked

    how can i connect the iPad to the iTunes if the iPad is locked

    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht1808

  • Can i connect the NI 9401 to the 9162 carrier

    Hello, can I connect the NI 9401 to the USb-9162 carrier, instead of having to buy the cDAQ-9172 for just one Module ?
    ciao, grazie
    M. Petrolekas

    The NI 9401 is currently not supported for the USB-9162.  I don't know what application you have in mind but you also might want to consider some of NI's other USB devices such as the USB-6212/6, USB-6501, or any of the USB-622x or USB-625x devices.

  • Can I connect the 24" LED to a PowerBook G4?

    Can I connect the 24" LED to a PowerBook G4?

    Only by spending more money.
    http://store.apple.com/us/product/TY153LL/A

  • Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

  • Can I connect the iphone 3gs with ipad 2?

    Hallo
    can I connect the iphone 3gs with ipad 2?

    You can connect it to use the iPhone as a personal hotspot for the iPad, or to transfer photos/videos via the camera connection kit. You can't connect them in order to transfer music, documents etc.

  • How can I connect the remote server which is installed with oracle

    Now my computer is in my home,in my computer there is installed with the oracle 9i client,the server is also installed with oracle 9i,which is in my company.Now I want to use sql*plus to connect the database of the server through the internet work.I have created one listener service name in my home computer,but can't test successfully and the sql*plus can't connect the database.Who can tell me how to do it?Thank you!

    Technical questions need to be addressed to one of the technical forums-- Products | Database | Database - General in this case.
    Unless you are VPN-ing in or the DBA's at your company have configured Oracle Connection Manager to allow you to connect through the firewall to the database, however, I doubt this will work. If they have configured Connection Manager, you'll have to ask them to provide you with connection information. 99.9% of the time, you do not want people to access a database via the internet.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

Maybe you are looking for

  • Problem with photos in new Photos application

    The new photos shows one photo in thumbnail but a different photo when I click or enlarge the thumbnail.  Don't want to lose either!Problem

  • Problem in printing PO

    hi experts,               user has a default printer take for eg PRINTER1  While printing PO in me29n ->print preview -> print option ...i am changing it to PRINTER2 ..but it goes only to default printer PRINTER1 ..what may be the problem ??????

  • I have iPad 4th gen but my iMessage is not working

    I have iPad 4th gen I was trying to send message but it's not working It says not delivered and number is on red

  • Cisco Prime 1.3 Trial version

    Hello, I could not find it by google. I have 2.2 but, Ionly have 8 GB of RAM, so I cannot deploy it. A download link (or a solution for 2.2 with 8GB RAM) would be awesome! THX!

  • Quiz Reports not working

    I have search this problem but found no solution. This is for Captivate 3 latest update. I want to create a quiz where the user needs to enter in thier name and fill out a couple things so i can see it in the report. Then go through the quiz. Instead