Can i connect to a HDD/printer on my Windows through my AirPort Extreme?

I have a Windows XP running machine, and i was wondering if i could set my external hard disk/printer to my AirPort Extreme and then use it for storage/printing. Not only with files from my Mac, but also with files from my Windows.
*My Windows is not a laptop, and is connected to the web through a kabel.*
Is it possible, and how ?

If the HDD is formatted HFS+ or FAT/FAT32, then yes. If the printer is one of those supported, then yes. You need to set up both devices via AirPort Utility. Check the setup guide to the Extreme.
http://www.apple.com/support/airport

Similar Messages

  • How to print on shared printer connected by an ethernat cable to a network through an AirPort Extreme wireless system

    How do you print on a shared printer connected by an ethernet cable to a network on a AirPort Extreme unit?

    I don't believe there's a way to print to it from an iPad ... unless the printer itself has wireless capability.
    This should help:
    AirPrint basics

  • Can I connect an external hard drive, with a FireWire connector to AirPort Extreme?

    I am considering getting AirPort Extreme. I need to be able to connect an external hard drive with a firewire connection. Can it be done?

    Sorry, but no.

  • How can I connect to Internet when there is a Gigabyte switch after Airport Extreme?

    I have a new Airport Extreme Base station. I have a wired home network set up through out the house. After the Airport Extreme, I have two gigabyte switches. I can connect to the network after the switch, but not the internet. I have also purchased new switches just to make sure this was not the problem. I connected the cable that goes into the switch into my laptop and was able to connect, however after the switch I still cannot connect. Wireless work fine. I need the wired connection for my DirecTv, X-box, Sony Bluray, etc. If it helps I have Comcast with a Motorola SB6120 Modem.  Any suggestions as to how I can get connected?

    Hi - I have only dealt with one question like this - it was with a different modem but it also had the new hi-speed technology and they were trying to connect the base station like you are with a new gigabit switch - the bad news is that no matter how many resets and reboots and different brand switches and cables were used, it wouldn't work - I told them to contact both the modem and the switch manufacturers but I haven't heard the outcome - maybe one of the gurus will weigh in an fill in the blanks.
    Charlie

  • Can I connect a device to get added LAN ports for my Airport Extreme?

    Can I connect an added device to my styetem to get added LAN ports for my Airport Extreme Router system?
    Mark Edwards

    Connect a Gigabit Ethernet switch to any of the 3 Ethenret ports on the AirPort Extreme to add as many ports as you need.
    Switches come in 5-port, 8-port, 16-port, etc versions.
    Your local computer/electronics superstore will have what you need.

  • Can i connect 2 external hdd using the thunderbolt to ethernet adapter

    can i connect 2 external hdd using the thunderbolt to ethernet adapter

    thanks its a wd my book world i just want to directly connect to it i dont want to use it as a network hdd anymote and if i do it will i still be able to use wifi to connect to the internet.
    it shows up the the bonjour bookmarks when its connected through my router does that mean it will work?

  • Can I connect an external hdd to my ipad2?

    Can I connect an external HDD to my iPad2?

    HyperDrive
    http://www.hypershop.com/HyperDrive-iPad-Hard-Drive-s/183.htm
    PhotoFast
    http://www.photofast.tw/index.asp

  • Mac Book pro can't connect to Internet through Apple airport extreme base station

    I had problems connecting to the internet in the past with my macbook pro.  One day it suddenly started working again but then I bought a second apple TV I lost connectivity.  I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet.  When I hooked up the new Apple TV that I bought it booted my computer from it's ip address.  The apple TV though wouldn't work and now nor would my computer.  I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not.  Even if I plug in the ethernet cable from the base station it doesn't work.  It show that it has a self assigned IP address.  After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet.  If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
    It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine).  When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router.  I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet.  Can you please help me trouble shoot this?
    I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
    I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

    It has something to do with the connection from the base station to my computer
    I don't think so..
    I just posted a reply which totally vanished.. strange strange website now.
    Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
    Please tell us what modem you use.. is it a router??
    If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
    You need to also give us the screenshot of the IP you are getting in a computer that works.
    EDIT
    Sorry this is half double post.. the previous page refused to display.. now it has returned..

  • TS1538 I can't connect my ipod4 to itunes 9 on windows vista but it appears in the pc but doesn't appear in itunes  can somebody help

    I can't connect my ipod4 to itunes 9 on windows vista but it appears in the pc but doesn't appear in itunes  can somebody help

    Yes
    http://www.apple.com/itunes/download/

  • Can i connect my iPad1 to my 2009 rav 4 through the aux jack?

    Can i connect my iPad1 to my 2009 rav 4 through the aux jack? If so, what accessories do I need to make this happen?

    Yes that won't be a problem ... All you need is a cable that has both ends that look like the plug for earphones ... Any electronics store will have them ... It uses the car stereo as the headphones ... You may have to use the iPad to control the music and use both volume controls. I would have the on full volume and adjust it to your preference with the stereo, however if you don't have the iPad plugged in to a power source then I would consider only using half volume to save battery life.

  • TS1363 I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    everytime I try to open the store it endlessly says "accessing iTunes store" but it never opens.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

    Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

    This what my IT replied with:
    That teh MacBook cannot connect with RWW because it requires Active-X to connect.  That MAc browsers (Safari) do not use Active-X but only Windows (IE) uses Active-X control.
    It would seem to me that there must be a way around this. Any help?
    Thanks,

  • I am having problems printing from my iPad via my AirPort Extreme network.

    I am having no success printing from my iPad via my AirPort Extreme based local network. I can use this to print wirelessly from my iMac OS X 10.7.5 and MacBook Pro OS X 10.6.8. I have 2 printer options: HP Laserjet (B&W) P1005 hard-wired to the iMac and HP Photosmart 7760 hard-wired to the AirPort Extreme. I believe I have checked all the correct boxes to enable the network and the iPad to connect, including ensuring that it is using the same network but when I try to select a printer I get the message that no printer can be found. Will it not work with an AirPort Extreme based network or only if this is connecting to wirelessly enabled printers which I do not have.
    Thanks for any suggestions.

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • Remote Desktop Connection won't connect to ip address through my airport extreme?

    I can't seem to get my RDC to connect through my airport extreme. I know it must be a setting on my airport extreme, but can't figure it out.
    When I hardwire the ethernet cable from the modem to the computer it connects fine, and when I set up a hot spot through my iphone, it also works fine every time as well.
    I've made sure to add "Windows Remote Desktop" through the port setting in Network settings on the Airport. Can someone please help me??
    Many thanks in advance...

    Hello Jedid4n. Welcome to the Apple Discussions!
    Do you have the AirPort Express Base Station (AX) configured as the remote base station in a WDS with the AirPort Extreme Base Station (AEBS) configured as the main base station? In order for the AX's Ethernet port to be enabled, the AX would have to be set up as either a remote or relay in a WDS.

  • I Can't Backup to time machine through my airport extreme.

    I Have recently paritioned by backup disks into two separate partitions and i now have the nice view of time machine because i switched to the GUID format. However, now i cannot backup to time machine through my airport extreme. Please help, it is very frustrating.

    No you can't and the reason is Apple blocked the ability for Time Machine to backup over WIFI to a NAS connected to the AEBS. Though I was able to use iTimeMachine to enable the feature prior to the recent Leopard update 10.5.2 which seems to have closed this ability once again. Apple's comment to me was to buy Time Capsule claiming the feature was never supported over WIFI with the AEBS even though their advertising just prior to Leopard's release stated differently. A lot of us on this forum paid for an AEBS and NAS drive based on Apple's own advertising regarding a feature they later blocked/removed and are extremely upset with the way the issue seems to be ignored by Apple support who pretend there was never an issue to begin with.

Maybe you are looking for

  • No Bootable Drive!?!

    Okay so I deleted my partition with Windows on it and then I was trying to get the disk to be one partition... it wouldn't take so I tried verifying the disk, I clicked something else and it gave me that beachball thingy so I turned off the computer

  • Jittery image on VGA projectors with MBP

    Recently I have had trouble projecting presentations from my MacBook Pro (15", early 2011, OS 10.8.3, 8 GB RAM) to several different VGA projectors. I am using a mini-Display to VGA adapter and use 2-screen mode (not mirroring). Initially, everything

  • Cannot find OLAP management tool in Enterprise Manager

    Enterprise Manager Console: 10.1.0.2 EE DB: 9.2.0.6.0 OLAP: 9.2.0.6.0 When I login to the database as OLAPSYS user (which has the OLAP_DBA) role, I cannot seem to find the OLAP Management tool for launching the Cube Viewer. In OEM, I see: - Warehouse

  • WAD:  Missing Items in 0ADHOC Web Template

    In the Web Application Designer, when I open the 0ADHOC Web Template, it comes up with several missing items.  Specifically, SAP_BW_TEXT_!llD_119, SAP_BW_TEXT_!llD_129, SAP_BW_TEXT_!llD_132.  Also, for some Web Items the image is missing.  The web it

  • How to write the Query

    i have a table with the fields d_date, d_type varchar2(10), d_time number(2,3) the data in this table is 10/10/2007 analyse 150 11/10/2007 analyse 150 10/10/2007 create 150 11/10/2007 create 150 10/10/2007 Design 200 11/10/2007 Design 200 how to crea