Can I connect to my Time Capsule from any where via the internet ?

I want to be able to connect to my Time Capsule when I'm on the road. How can I do so?

Do a google for remote time capsule connection.
Yes, it is very easy using a Mac if you have static public IP and the TC is the main router.
It can be done via iCloud and BTMM.. again just look it up.
It is very very hard to do it without iCloud Lion and latest TC firmware or static IP.
It should be accessed by AFP.. means no windows machines.
It should be considered carefully as there are some risks.. passwords my not be exchanged encrypted..
The right way is vpn using a vpn router and TC in bridge.

Similar Messages

  • Can you access Time Capsule From any where, or do you have to be on the same network

    Can you access Time Capsule From any where, or do you have to be on the same network

    check out the post by Tesserax in this discussion.

  • Can you access time capsule from a mac over the internet

    Can you access time capsule from a mac over the internet?

    Yes. See this thread about how to access the disk attached to a Time Capsule.  Access to the Time Capsule itself can be done similarly.

  • Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

    Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

    Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
    Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

  • Upgraded MobileMe to iCloud and now can't connect to my Time Capsule at home with Back to My Mac

    I upgraded my MobileMe account to iCloud yesterday and now I can't connect to my Time Capsule when I am away from my home network.  I had been able to using Back to My Mac with my MobileMe account.  Now the airport utility still only shows a mobileme option in the advanced settings.  Is there an update for the time capsule so that I can input my iCloud information?

    Apparently this isn't possible. This was never discussed publicly before the iCloud launch. All that was said was Back to my Mac would continue working. I looked everywhere and couldn't find anything, even after the iCloud launch. Made the switch, my AirPort started yelling at me because of MobileMe credentials. I've been waiting for an AirPort update but have still been digging. Just found this:
    http://support.apple.com/kb/HT4867
    Talk about a footnote. This should have its own article, not be like, "Oh everything will still work great! ... ... ...
    Except for AirPort disk sharing."
    I'm not too happy about this.

  • Accessing Time Capsule From Any Internet Connection

    Could you please tell me if it will be possible to access Time Capsule from any internet. I would like to put all my files on the device and be able to access these while out on the road.
    Thanks in advance for your help
    Cheers Steve

    Yes, you certainly can (right now) remotely access the hard drive attached to your AEBSn. I will refer you to "Step 4" in Apple's article Sharing a USB hard disk on your network for instructions on enabling this feature. To access the disk remotely (and don't test this from a computer on your own LAN) select "Connect to Server" from the Finder's "Go" menu, and enter the public IP address of your Base Station.
    I have to admit the specs for Time Capsule don't explicitly indicate that Time Capsule will support this feature. However, given this feature is available on the AEBSn and is easy to implement, I would be very surprised if Apple took away this feature when they designed Time Capsule.

  • Can I connect and use Time Capsule with two printers?

    Can I connect and use Time Capsule with two printers?

    Sure, if the printers connect using the Ethernet port, you have 3 ports on the Time Capsule.
    If the printers connect using wireless only, the Time Capsule will support up to 50 connections.
    If your printers connect using USB, then you will need a powered USB hub. Something like this, for example:
    Dynex 4Port USB 2.0 Hub DX-THUB16 - Best Buy

  • I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

    As described above.
    I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

    You will have setup issues.. as the latest AC model requires a Mac or iOS device.. eventually apple will release a windows version of the utility.. and the current one does partly work but Apple seem in no hurry.
    You can find a Mac or iPad equipped friend to do the setup.. once setup the Windows computer can use it.
    BUTT you cannot access it from remote..
    Not with windows. You need BTMM and iCloud account. AFAIK even with those you cannot reach the TC.
    You can do it manually.. using a vpn. Buy a proper vpn router and use a vpn client on the windows computer.. the TC would be in bridge to the network..
    Apple really did not make this for windows.. and SMB access is only provided on LAN access not WAN.

  • How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

    Hi guys I just bught a
    WVC210 Wireless-G PTZ Internet Camera
    I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
    I would like if some one can send me a video tutorial on how to do it.
    I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
    I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
    For exaple: www.example.com/mycamera???
    If not well I would love to here the options I have.
    Thank you very much in advance!

    Rogerio,
    I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

  • How can i connect xbox to time capsule?

    Hi, I am (whilst being shouted at by my 11 year old son), trying to connect Xbox 360 to a time capsule. I tried last year without success, and afer chatting with a bloke yesterday in an Apple store, I thought I would try again. No luck. I've tried inputting every set of numbers and address I can find, but the Xbox, just will not connect. Is there a simple set of instructions that will do this? The forums I've looked at have information that is beyond me. The time capsule is connected to a Virgin media modem via ethernet. The Xbox Live connects via ethernet cable to modem just fine. I would just like it to work wirelessly so I don't have to keep plugging the cable back into the time capsule and rebooting. As an alternative is there a piece of kit that would let both the Xbox and the time capsule remain wired up to the modem? There only seems to be one connector however. Many thanks in advance.

    Connect an Ethernet cable from a LAN <-> port on the Verizon gateway to the WAN port (circle of dots icon) on the Time Capsule.
    Then, temporarily connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule to help AirPort Utility "see" the Time Capsule. Once you have the Time Capsule configured and updated with new settings, you can remove the spare Ethernet cable.
    If that is not successful, you will need to perform a Factory Default Reset on the Time Capsule as follows:
    Pull the power plug on the Time Capsule
    Wait 4-5 minutes
    Hold in the reset button on the Time Capsule and while you continue to hold it in, plug the power back to the Time Capsule
    Keep holding the reset button for 8-10 seconds before you release it
    Wait 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
    Restart your Mac, then open AirPort Utility to configure the Time Capsule

  • Can't Connect to My Time Capsule Backups, Please Help!!!

    I have been using Time Machine/Time Capsule to back my data up for over a year. I bought a new MacBook Pro this morning. I did not want to use Migration Assistant to transfer everything over because there were many bugs and corruptions on my old disk and was scared that would all be transferred to my new machine. It was time for a fresh start.
    I set up my new computer and transferred most of the files I needed via a flash drive. I am now trying to set up my MacBook Pro to connect to my Time Capsule backup disk via Time Machine, but once I enter Time Machine it does not allow me to go "back in time" to see all of my previous backups and restore points. There are some really important files I am trying to get to, but this computer isnt connecting to the Time Capsule backups. The old computer has already been completely reformatted, but it is still able to access the Time Capsule backups.
    I have done some internet research and learned that Time Machine uses a computer's ethernet MAC address to allow access. There are some codes posted on various websites that allow to alter what Time Machine thinks you MAC address is so that you can access your backups with a new computer/different logic board. None of these Terminal workarounds worked for me. The Genius Bar and Apple Care couldn't help either.
    I am hoping somebody can help me out. I understand I can use my old computer to get into Time Machine and retrieve what I need then transfer those to the new machine. But there must be a way to allow a new computer to fully access Time Capsule backups, but curiously, I can't find it. I rather have my new computer have full access because I am selling the old laptop and so I wont be able to use it to access my backups any longer.
    Sorry for the long explanation, but I hope that gives someone all the facts required to both understand what I am saying and help me fix the problem.
    -Amir

    Right now it is just empty because I have unmounted and disconnected my Time Capsule. I'm trying a low-tech work around to see if this works, but much rather do it the "right way."
    What I am doing is this:
    (1) Use Migration Assistant to copy everything from the Time Capsule to the new machine (this is exactly what I was trying to avoid initially). Migration Assistant has been copying files for about 5 hours now (still not sure what is going to happen).
    (2) Create a full backup on Time Capsule with my MacBook Pro now that it has everything from the Time Capsule on it.
    (3) Do a fresh install of Snow Leopard.
    (4) Hopefully, have the fresh start on my machine I wanted, but still have access to at least one archived copy of my old computer and files/folders.
    Does this make sense? Basically, the new machine does not allow me to access the old backups. So I am handicapping the machine now by reverting to my old settings via Migration Assistant, will back that up, then start all over from scratch again but hopefully have the peace of mind that my files are not gone because I will at least have that one copy of all my old copies in a Time Capsule backup that the new machine can access.

  • Can´t connect remotely to Time Capsule

    Hi,
    since I installed OS X Maverick, I cannot connect to my Time Capsule remotely anymore. Simple says "Connection failed". Under "Connect As" it basically says the same in a longer message. Under the previous system it worked fine.
    I have setup Time Capsule to store my login/pwd of the  iCloud account and "Back to my Mac" in the iCloud settings on my computer. It´s an older Mac Book Pro 17".
    Does anyone else have this problem and maybe solved it?
    Thanks for the help!

    Ok. . but you are probably in deep shitzen..
    1. Yosemite clearly has issues.
    2. If you have setup the TC correctly behind the FIOS router in bridge mode you cannot use BTMM .. it is simply not going to work.
    You can use one of the other methods.
    See AirPort Disk - Remote Access (3 Methods)
    Let me also add, if you want to do this in a business manner.. I would add a method 4.. vpn.
    Connect a suitable vpn router to your FIOS and put your TC in bridge to that. Forward whatever ports are required to your vpn router so it is able to establish the tunnel to the outside world.
    From a business practice point of view this is the right way to do things.. you may need specialised help to get this working.. you might also need business ISP account with static IP. BTMM is a home method.. avoiding the complexity of vpn, which is also less than 100% reliable.. no business would rely on such a method. Nor on using domestic accounts.. remember you are treating your home setup as your business. It should be the other way around. The information you need should be at your business location and you link to it from home.
    If you actually need this access then do it right. OR get a USB drive and make a clone of the files so you can carry them with you . .or use cloud services.. which are far more reliable albeit you cannot store as much without fairly high cost.

  • I can't connect to my time capsule. the machine is on but the message is the backup disk is not available.

    My Mac desktop has not backed up to my time capsule since July 10th.  The time capsule is on and plugged in but the message reads that the backup disk is not available.  What can I do?

    It helps to know what OS you are running on the Mac.. let me guess.. Mavericks.. since it is the most buggy on the network side.. although Lion and ML are also lacking the rock solid nature of Snow Leopard.
    Have you done the simple things.. ??
    ie reboot the TC?
    No luck then reboot the network.
    No luck then I would recommend a complete reset of the TC.
    I have outlined how to do this many times.
    eg Re: Why the connection from Air to Time Capsule is lost suddenly?
    As you will see this is not something unusual.
    Apple has a document.. very well hidden.
    OS X Mavericks: Time Machine problems
    It is helpful (although it doesn't go far enough IMHO).
    Try what I have suggested and tell me how it goes.. more problems then also give me more info.
    Full network info and details on the OS you are running.

  • Accessing Computers Connected to a Time Capsule From a Remote Location

    I am already able to access my Time Capsule from a Remote Location and have read/write access to the internal hard drive within the Time Capsule and the USB hard drive connected to it.
    My problem is that I cannot access any shared computers or networked hard drives attached to the Time Capsule.
    Suggestions are greatly appreciated.

    If you don't want to use Back to my Mac, you can just use screen sharing. Go into Airport Utility and go the Advanced tab along the top. Then click on port mapping. Set up a new port map to route to the iMac. When I did this, I just used the "Apple Remote Desktop" option from the drop-down menu, this pre-fills everything in for you except for the IP address of the iMac. Just pop the IP address in the field, save the new port map, and Update the TC. Now you should be able to screen share from anywhere with your MacBook Pro using the screen sharing app. The Screen Sharing app is located in /System/Library/CoreServices/ScreenSharing just drag it to the dock to keep it there. When you open it up it will ask you for a host address, just type in the IP address of your time capsule followed by the 5900 port number, for example x.x.x.x:5900 where x.x.x.x is the TC IP address.
    Just make sure your iMac is set up for File Sharing, Screen Sharing, and Remote Login, and you should be good to go. Just a word of caution, when the port map is set up, anyone can use it, so set up a good password on your iMac. Also, under the screen sharing pane, click on "Computer Settings" and check both boxes and enter a password in the box. You should not need this because when you try to connect with your MBP, it should give you an option for logging in as an authorized user, in which case just use login info for a user on the iMac.
    Just one last thing, if you close the Screen Sharing app and open terminal and enter:
    defaults write com.apple.ScreenSharing ShowBonjourBrowser_Debug 1
    then hit enter and reopen Screen Sharing, it should give you a list with all your bonjour computers and saved computers, so when you out in your IP address to connect to the iMac, make sure the box for "Add to my Computers" is checked, and it will add the IP address to the list so you don't have to put it in all the time.
    Hope this helps,
    Nathan

  • Time Capsule - how to gain "over-the-internet" access from Windows 7!

    Hi guys,
    I've been fighting for such a long time with my Time Capsule. I have no idea how to gain access "over-the-internet" on a PC (Windows 7) which is running on  another network. My Time Capsule is set up with my Macbook Pro at home running Lion OSX, and i have internet connection. My brother who also uses Macbook has no problems connecting to my Time Capsule - through finder (connect to a server). But how do I gain "over-the-internet" access to my Time Capsule through a PC (Windows 7) from my office? Is there please someone who can guide me step-by-step, how to gain connection to my TC through a PC? Or maybe just an explantaion what has to be done on the PC before this thing can work out! This was the main reason to why i bought Time Capsule - besides of the Time Machine function. I also have an iCloud account (earlier Mobile Me), if that makes any difference.
    Thanks!

    There is no way to do it from windows direct to the TC.
    It only presents AFP to the WAN side. And most ISP block SMB from internet access due to risks. There is AFAIK, no suitable AFP protocol utility for windows at the moment. If you google and find one, be aware it probably will not work to your satisfaction anyway.
    You must use a Mac to access AFP but even then it is not a secure protocol and I would recommend against it anyway.
    So basically if you had have asked before purchasing, I would have said, TC is unsuitable product. It is a backup drive for a Mac. It is not a NAS.. it is not designed for remote access by any computer other than a Mac. It does not support any other file protocol to the WAN interface.. and no secure protocol even there.
    A NAS with Time Machine extensions from QNAP, Synology, Netgear all are designed for web access and are far more suitable. Researching a purchase beforehand is always worthwhile.
    Anyway, your choices are.. return the TC and buy something more suited to the job.
    Or if return is now impossible sell the TC on ebay.. etc and do the same thing.. buy a more suitable NAS.
    Or buy a cheap mac mini (even second hand) and use that for communications with home.
    Or, replace your current router with something that includes vpn. This is actually a good and commercially sound decision. VPN is generally used by business to connect to remote locations, because it is secure and will allow the greatest flexibility of connection. How hard or easy depends on the current setup. I would recommend a combined modem router with vpn server if you have adsl. Or for cable you can find plenty of routers with combined vpn. You can also use those for adsl if your ISP allows pppoe with bridged modem. The TC will have to be bridged as well. For other broadband it might be harder to find the right kind of box.
    Once you setup a vpn you can access it from work using the appropiate vpn client in your work computer.

Maybe you are looking for