Can I connect two iMacs and share displays?

I have two iMacs, one is a 21.5" and the other is maybe a year newer 27". Is there a way I can connect them, share displays and switch between the two? If so what do I need to make it happen? Thanks so much in advance!

Depending on your exact models of iMacs, you may be able to:
Take a read here:
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support

Similar Messages

  • Can I connect two non-TB external displays to a new MBP?

    Looking to pick up a new MBP and I would like to connect two non-Thunderbolt monitors, they are nice but WAY too expensive, and I'm wondering if this is possible.  I know I can use Matrox Head2Go line of products, but I would like to avoid shelling out another 2-300 on other hardware if I can avoid it. 
    So any other ways to drive two monitors?   I'm surprised there is no Thunderbolt -> DVI adapter or something.  Heck maybe there is, but I haven't seen it yet.
    Thanks

    here is the adapter your were looking for http://store.apple.com/us/product/MB570Z/A
    you'll also need to consider getting something that supports usb to dvi which will make your third monitor connnected via a usb port. This uses DisplayLink Drivers which let you connect a monitor via usb. Warning, it does not have full support for Lion yet.
    I'm using the arkview usb display adapter. there are other on the market, they all use DisplayLink. And since I'm on Lion I'm waiting for DisplayLink to fix their drivers to work on it (it's been a struggle).
    If you're on Snow Leopard it will do you well to stay on it. .
    you could get on Thunderbolt display and then connect a monitor to that with the dongle I showed you. Then you will have no issues with Lion and your three displays.
    Thunderbolt tech is new and new adapters will be coming out for it, especially something that handles mutliple screens. but you'll have to wait for this technology to be made.

  • Can I connect an iMac AND a MacBook Pro at the same time on icloud ?

    I arrived without a problem connecting my MacBook Pro icloud but I can not open a session with my iMac when I get the Apple ID and my password and he said "The login is currently impossible.Try reconnecting" and below the two boxes there writes : "Apple ID or password not recognized". I do not understand why, while on the same iMac I connect without problem on www.icloud.com

    After 1 or 2 reboot system I managed was enter my MacBook Pro my AppleID and it is connected I managed so to have the flow of "Stream Photo" from my iPhone 4 S to my iPad 2 on the MacBook. But incomprehensible how the function "find my Mac" not recognize the MacBook Pro in "iCloud.com" or App in the iPhone 4 / iPad 2. Thus I do little "see the iMac, iPhone 4 and my iPad 2" and not the Macbook Pro !?!
    I am sorry about my English quality but I'm not English speaking this text is translated by Microsoft Translator.

  • Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Look up "screen sharing" in help
    You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
    After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse.  Choose your mac mini's name, and look for the "Screen Sharing" button.
    Choose Apple menu > System Preferences, and then click Sharing.
    Select the Screen Sharing checkbox.
    To specify who can share your screen, select one of the following:
    All users:
    Select this if you want to allow any user with a user account on your computer to share your screen.
    Only these users:
    Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
    Click Computer Settings and set the following options:
    Anyone may request permission to control screen:
    Select this to allow anyone on your network to request to share your screen.
    VNC viewers may control screen with password:
    Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

  • Can I connect two apple tv on same network and same apple ID at a time ?

    Can I connect two apple tv on same network and same apple ID at a time ?

    Welcome to the  Discussion Forums.
    Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though.

  • HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
    www.drbott.com

  • Can I connect both PC and MacBook Pro to Thunderbolt display?

    Hello,
    I've new MacBook Pro 15" 2011 model (with Thunderbolt port) along with a PC (with DVI output.) I would like to get new Thunderbolt display. Can I connect both PC and Mac at the same time to Thunderbolt display? i.e., I don't want to disconnect wires at all the time and I also I'm going to use Thunderbolt cable when connecting Mac to display.
    Any help would be appreciated. Thank you.

    Your MBPro (w/TB) should have no problems connecting to the newer TB display!!!
    You can NOT connect the PC to the TB display.   The Apple website mentions that the display can connect to any "Thunderbolt Enabled" Mac.
    http://store.apple.com/us/product/MC914?mco=MTgwOTQzMzk#overview

  • How can we connect mac air and iPad to share all documents and downloads

    How can we connect mac air and iPad to share all documents and downloads?

    If you are referring to the "Documents" and "Downloads" folder in OSX, I suggest using https://www.dropbox.com

  • Can I use my iMac as a 'display' for my MacBook Pro?

    Hi all, I am really hoping someone can help me here.
    I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
    It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
    My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
    Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
    Any suggestions would be really appreciated.
    Thanks!

    The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
    See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
    One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
    Cheers
    Rod

  • How can i connect my Imac late 2012 to my Samsung TV??

    How can i connect my Imac late 2012 to my Samsung TV??I have a hdmi cable stuck in my Tv and the other end a adapter from hdmi to mini display port. but it won't work I don't get no picture or sound on my tv

    I have an Apple tv and with this it works of course. But I wanted it to use with Windows 7 so I need to connect my imac to my tv...
    how can i turn it on in the settings? it won't work or recognize my tv

  • Can I put two iMac's back to back on the same desk.   I noticed the computers feeling hot.

    Can I put two iMac computers back to back on the same desk - I share a table with my husband and our computers have to be placed back to back.   I noticed the tops of the computers feel hot!  

    There should definitely be a little space between them to allow for ventilation, but it's normal for the top area to get hot.
    Matt

  • Connecting 2 iMacs and using Syncopation

    For some reasen I just don't get it done: connecting two iMacs (with up to date software) and then using Syncopation 2.2 to make a back-up of my iTunes library.
    I'm not comfortable with 'networks' and this seems to play a role here.
    I have connected the two Macs using ethernet but I have the feeling I forget something or do something wrong.
    That, combined with the fact Syncopation provides very unsatisfactory instructions, makes that although the machines 'see' each other:
    a newly bought album is not back upped to the second Mac.
    If anyone can provide me with a step-by-step-manual-for-complete-dummies to solve this, I would be very, very grateful.
    Thanks!!!
    René van den Abeelen, the Netherlands

    We do not have any way to know how your app 'Syncopation" should work or is working.  You need to go on the web and contact Syncopation's web Techincal Support to get proper help with that.

  • How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    You need to find out what video out you have on your iMac, and what kind of video inputs there are on your TV.
    It will help to know exactly what model iMac and exactly what make/model TV you have.
    Depending on the exact model iMac you have, it may have miniVGA, miniDVI, miniDisplayPort or Thunderbolt output.  Your TV may have composite, S-video, component, DVI, VGA or HDMI inputs.  Once you confirm what kind of ports your iMac and TV have, then we can probably suggest the correct cable or adapter so you can connect them to each other.

  • Can I connect two monitors to a Mac Mini?

    Can I connect two Monitors to a mac mini

    Yes, but how depends on what model of Mini and what kind of monitors.  Early models only had one monitor port.  Later models had a Mini-DVI port and a Mini-Displayport.  Current models have a Mini-Displayport and a HDMI port.  The Mini-DVI and Mini-Displayport can attach VGA or DVI monitors, whereas the HDMI port can't use VGA monitors.
    Beyond that, you can get Matrox's DualHead2Go or a USB->VGA or USB->DVI adapter.  The Matrox product is a bit expensive and the USB adapters are a bit to slow for games and such.  So, again, the answer is "yes", but with limitations

  • I can't connect two shapes in Pages for IPAD, why?

    I was writing a document  in Pages for IPAD and i try to make an organichart, but i can't connect two shapes (two squares) with the "connecting line", i try many times in different ways, but never work. So i decide to try to connect two shape in Keynote for IPAD and in work perfectly.
    What i'm doing wrong in Pages for IPAD?
    thanks in advance
    Juan Pablo

    I found the option that you mention!, and it works!! thank you very much!
    BUT..... i have to change it manually for each object, either when insert the object or copy/paste the object!
    is there any way to set it before I insert and object?
    thanks again
    Juan Pablo.

Maybe you are looking for

  • Jabber for Windows LDAP problems

    I have been modifying the jabber-config.xml file to get the results I need without a lot of success. Our Business phone number is derived from the ipPhone field We have many disabled users that continue to show up in searches Even though I have confi

  • Windows 7 home premium reinstall over windows 8

    Can I reinstall windows 7 home premium over windows 8?  I made the mistake of installing windows 8 as soon as it came out and I dislike it very much!  I want my 7 back!!!!!!!!!!!!!

  • Blurred image with HD webcam - despite good intern...

    I have a Logitech HD Pro webcam C920, but the image is blurred at the reciever. My own image I can see on my computer is fine, and the contact's image is ok, but the reciever tells me, that the image is blurred - meaning not sharp. The reciever is a

  • Need to custom build cProjects Auto Include (task) functionality

    Hello all, We are currently building a reskinning application for cProjects (and DMS) and one of the requirements is to choose a phase in a cProjects project and "Include" a set of tasks from a task template. Do you know if there is any BAPI to the s

  • Mail keeps asking for a password to a deleted account

    I haven't used Mail in a while. The last time was when I was trying out my free MobileMe trial. I just opened Mail, deleted the MobileMe account, and created a gMail one. Now every time Mail checks for new mail it asks me for the MobileMe password, e