Can i control a digital photocamera trough the USB with Labview

i want to control my digital photocamera with labview, so that i can take a picture on a labview command.

NeoVista (www.nvsi.com.au) has an excellent toolkit for controlling Kodak digital cameras - maybe they could help?
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Similar Messages

  • How can I control a Festo (MH..4) Valve with Labview?

    Hey,
    i'm very new to this Labview stuff and have a minimal background in electronics so I'm struggling with trying to sort this one out.
    I have a high-frequency valve (~400Hz) that we would like to control via the 9 pin RS232 port using labview. is this possible?
    i imagine we will need an interface between the computer and the the valve (which requires a 24Volt digital signal) but I am not sure what to use. Buying a stock pc control board from LabVIEW is not an option because I will be running this from a laptop.
    cheers
    Nic

    Nic,
    you can easely control 2(3) of the 9 Pins of the RS232 Port with the VISA Propeties (Visa Open, VISA Propety (Modem line settings: DTR and RTS state (and Break (TDx)) , VISA Close)
    However, since the serial driver it is not made for this type of timed digital IO, I'm not shure about the resolution you might get. If you have a scope, then do some loop testing and move some windows or do some other system load :-)
    Have a nice weekend
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

    When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
    I store my PSD files adjacent to the original RAW file from which it was derived.
    If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
    How can I control which Photoshop will open a file I select when opening it through Bridge?.

    Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
    Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
    But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
    Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
    And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

  • Can you control movement of regions without the mouse

    can you control movement of regions without the mouse? I have trouble nudging the regions with the mouse and was hoping there was a keyboard solution.

    Mezoaria wrote:
    I have trouble nudging the regions with the mouse and was hoping there was a keyboard solution.
    there is not.
    perhaps it would help to turn off the Snap To Grid menuItem?

  • I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    Ask the Verizon store to exchange your iPhone for a different iPhone 4.
    UPDATE - Sure, try ckuan's solution first.  Then use mine if that fails.
    Message was edited by: sberman

  • I received a $15.00 gift card. All but $.99 has been used. I want to make other purchases but can't as I'll be over the .99 with the tax......Of course I have a credit card on file, someone please tell me what to do in order to make another purchase? Than

    I received a $15.00 gift card. All but $.99 has been used. I want to make other purchases but can't as I'll be over the .99 with the tax......Of course I have a credit card on file, someone please tell me what to do in order to make another purchase?
    Thanks.

    JaniNY wrote:
    I thought of that, but my question is does it automatically flip to the CC.
    Yes.
    If you have a gift card balance, iTunes will use that.
    If the total is more than that, the difference will be charged to your credit card.
    You need do nothing.
    See this -> iTunes Store: How to redeem a code
    Free song credits are redeemed first.
    If you have no free song credits, gift certificate, prepaid card, and allowance credits are used next.
    If your gift certificate, prepaid card, and/or allowance credit is less than the total cost of the purchase, your credit card is billed for the remaining balance.
    If you have no free song credits or gift certificates, prepaid cards, or allowance credits, your credit card is billed for the songs you buy.

  • Can I use a phone purchased in the US with a Canadian service provider?

    Can I use a phone purchased in the US with a Canadian service provider?

    So if I buy it from an Apple store in the US and bring it to Canada I would be able to use it with a Canadian Provider?
    In Canada an iPhone5 is 699 in the US it's 199 ....

  • How can i stop apps from running in the background with the new ios7 update

    How can i stop apps from running in the background with the new ios7 update

    Double tap the Home button...slide the last used view of the app(above the icon) up. Tap Home button when finished.

  • Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    Hi vijayanandhtkp,
    It sounds like you are getting the Connect to iTunes screen as discussed in this article.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    If so, please check out this article as linked from there.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

  • HT1539 1080p Digital copy of the Avengers with the Triple Play edition?

    Is it possible to download the 1080p Digital copy of the Avengers with the Triple Play edition (Blu-Ray 3D + Blu-Ray + Digital Copy)?
    The Edition that downloads automatically is only 480p.

    The third-generation iPad is. But from reading several forums on the issue, it seems confirmed that the digital copy for The Avengers is SD, not HD.
    Regards.

  • HT1539 my daughter has taken the insert page with redemption code out of the dvd case and we cannot find it.  is there any way i can still download my digital copy of the movie in itunes?

    We Have managed to lose the insert page that came with our dvd and digital copy.  Is there a way i can still download the digital copy without the redemption code?

    Please please help me, if you know how.

  • I have an audio file that plays automatically and I can't control it other than reduce the volume.  How do I turn it off?

    I have picked up an audio file that I can't control other than reduce the volume.  I don't know how to turn it off and it plays over any other audio.

    Is this an Apple installed audio clip?
    Have you checked to see if all of your browsers doesn't have a web page that is opened that has the audio? (Best thing is to quit all of your browsers to get that out of the way.) If it goes away, then find out which browser (if multiple), and then figure out what page or just close it if you wish.
    Once you get the browsers out of the way and the audio is still playing. Then quit other programs.
    KOT

  • Can I control Internet Access Centrally from the H...

    Hi,
    Is it posible to block access to certain categories of internet web sites directly from the hub using OPENDNS or any other method?
    I can set access times using the bthomehub, but I would like to be able to check/limit the material they are able to access as well. 
    Can I apply this control centrally from the hub and not have to set up the control on individual machines in my home, as I would if I use the BT Netprotect.
    My kids access the internet with ipads and phones and so a central solution from the hub would be ideal.
    Thanks
    Solved!
    Go to Solution.

    Hi geresy,
    Welcome to the Forum and thanks for posting. This might help. Let me know if it does.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Can you control movement of regions without the mouse? I am more of a keyboard person.

    It is hard to nudge the regions with the mouse. I don't see a keyboard shortcut.

    see the other thread you started

  • How do I control a digital output on NI9144 FPGA with fpga code running on NI9082.

    Due to a recent change in our hardware configuration I need to locate my various I/O modules in various locations around the facility. I am attempting to use an etherCAT setup consisting of an NI9082 and multiple NI9144 (for now only one NI9144). I need both devices to run code in the respective FPGA and make the results available to the other devices and for user interface software. My question is is it possible for the two FPGA code segments to communicate directly with each other without going through the RT or computer interfaces. I need to fire a digital output bit on the NI9144 based on logic running on the NI9082.
    Are there any good code examples around that someone can point me to?
    Thanks for the help.

    Hi, you can include trigger conditions (digital, or analog) on your FPGA VI and connect directly the I/O from module to module (analog with analog & digital with digital), however, if the chassis are meant to be at different locations the cable used to connect the ports is equals the length in between each device and that could degrade the signal if we are taking about a couple meters or kilometers. The most reasonable way to send/receive data from great distances is through ethernet using a regular communication protocol (such as TCP/IP, network streams, network shared variables...etc).
    Alejandro | Academic Program Engineer | National Instruments

Maybe you are looking for