Can I control the amount of time for timed loop

I was curious if it is possible to control how long each frame of the time loop takes or does it have to be constant for each section?

You can change the period for the following iteration.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
change period.PNG ‏9 KB

Similar Messages

How can I count the number of times a timed loop finished late?

I am getting occasional timing errors in a timed loop under windows XP and would like to count the number of errors, but I can't find a simple software counter vi

The timed loop has a terminal (boolean) to indicate if the previous iteration finished late. Just increment an integer shift register if this happens.
The attached shows a very simple demo (LabVIEW 7.1).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LateCounter.vi ‏76 KB

Can I change the moments and time for photos?

Can I change the moments and time for photos?

By editing the EXIF data. You'd need an EXIF editor for this...if using Windows, you can use Windows Exploroer. To do so on your phone, you need an app, like this:
https://itunes.apple.com/us/app/exif-fi-photo-gps-exif-viewer/id574247475?mt=8

Can I limit the amount of Time Machine backups?

Is it possible to limit the amount of Time Machine backups? I have a 2 tb drive to store back ups...it's nearly full. I'd like to use the drive for other things as well.
Hope this makes sense.

Ohhh, no way!!
Pondini died?????? I just talked to him a couple weeks ago it seems.

I have a Samsung S5, How can i increase the amount of time my phone rings?

So as stated in the Subject, I have a Samsung S5 it works really well so far, However when someone is ringing me it only rings 3 times. Is there a way i can increase the amount of times the phone rings before it goes to answer machine?

Hi,
Try this:
1. Dial *#61# and click Send. You will see your VM access number and the current ring delay time.
2. Write down the phone number displayed (including +1).
3. Dial **61*+1xxxyyyzzzz*11*30# and hit Send. +1xxxyyyzzzz is the number you wrote down previously, 30 is the delay in seconds. The delay can be set in 5 second increments, 30 is maximum.
4. Dial *#61# to verify that the new settings are active.
Thanks,

How can I change the snooze alert time for my calendar?

I have no idea what the default snooze time is as I have never seen where this is an option. It is annoying to get five snooze alerts for five different events with no way to modify when I want them. Is anyone looking at this?

No. You can't change it.

How do i change the amount of time for slides in a keynote presentation so they are not the same

how do i vary the times for the slides in a keynote presentation, i have 3 videos i need to run longer and the slides I want to run the same

Is this for an unattended presentation?
1. If not, the option would seem to be:
Manually advance the slides containing the videos or
set the transition delay time to the next slide to occur after the video completes using the
Slide > Transition Inspector > Delay (max delay is 600 seconds so if video is longer than 10 minutes, an automatic delay wouldn't work)
2. If you plan this to be unattended your best bet is to compile it in iMovie and have a looping video with all parts timed in the video to your liking.

Where can I download the Crystal Run Time for Windows Server 2008 64 bit ?

Hi,
Where can I download the Crystal Reports 08 RunTime for Windows Server 2008 64 bit ?
Rock
Edited by: Rock_1234 on Aug 5, 2009 9:25 AM

Thanks all for your replys.
As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
When will be 64 bit runtimes for CR 08 will be available?
Thanks

How can I limit the amount of time my Safari Browser remains open?

Since I live way out in the country, I am limited to EXEDE ViaSat, for internet. I know it is archaic to pay for limited data, but I'm stuck with it. On my iPad, I can limit the time my browser is open, so it closes automatically if I'm not using it. My iMac (OS X Maverick 10.9.5 - using Safari 7.1.4) stays open and burns up data like crazy. I looked, in Safari Preferences, and can't find any place to limit the time the browser stays open. Can someone, please, help me do that? Thanks.

Thanks for responding babowa. Actually, if my husband or I forget to shut down the browser, and walk away - even though nothing is happening - it continues to use data. Just today, we blew through 2GB, and we're only actively using the browser for about 15 minutes. I left the browser open for my husband, but he didn't get to it, and it didn't get shut it down.
Hitting Command Q isn't really a solution, for us. If we remember, we click the red button in the upper left corner, of the browser page and it closes the browser. The problem is, sometimes we forget to close the browser and it continues to use data. On my iPad and cell phone, it automatically closes the browser after 30 seconds. I'm looking for a way to to that on my iMac.

Installation fine - except the amount of time.

Over all, the installation on my G4 PPC iBook 14" went well. All of my Apps work (so far) including my VPN to my office with Remote Desktop. I was actually surprised.
The only problem I have (so far) is the amount of time for the install.
* disk validation - way too long.
* nearly 3 hours of actual upgrade install.
* spotlight indexing probably will not be done till in the morning.
Well, 1 Mac down and 2 more to go: 12" PPC G4 iBook and PPC MacMini. (yes I got the family pack)

Just skip the verification, especially on your other machines since you now know it's fine. I never wait for that, especially if it would take 3 hours :-O.

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

Apple TV uploads can take up to 30 minutes. I need control over this, because it interrupts my presentations. How can I control the time it chooses to do uploads?

Apple TV uploads can take up to 30 minutes. I need control over this, because it interrupts my presentations. How can I control the time it chooses to do uploads?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

I have multiple songs I would like to include in my slideshow. Can I change the rate of presentation for each song? For instance, upbeat song with a 2 secong presenation time and slower song with a 3 second presentation time?

I have multiple songs I would like to include in my slideshow. Can I change the rate of presentation for each song? For instance, upbeat song with a 2 secong presenation time and slower song with a 3 second presentation time

Alternatives to iPhoto's slideshow include:
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $99
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

Increase the amount of times you can "Step backward" alt+cntrl+z?

I find myself saving numerous iterations of my files, because the defualt settings only let step backwards a few times. Is there a way to greatly increase the amount of times you can step backward? I though perhaps the history window would let me double back on many of my actions, but even that did not go far back enough.

I'm not fully sure I follow you in this logic yet... I apologize if I'm being dense.
Saving your work occasionally is always a good idea, REGARDLESS of the number of history states. Even if you keep only 10 history states you'll lose just as much work if you haven't saved anything since the last several hundred steps and elephant droppings unexpectedly shut down your PC.
The important thing I'd like to note is that my choice of the number of history states, from what I have observed, does not seem to change the stability of Photoshop in any way.
If you find choosing a larger number of states does destabilize Photoshop on your system, perhaps you have RAM problems? Or maybe configuration issues? What do you have your RAM usage limit set to?
Your example about brush strokes is actually a good one to make my point that a deeper history can be a Good Thing. For example, if I touch up 75 spots (hot pixels in an astroimage, for example) with separate applications of the Spot Healing Brush, then I want to compare before and after images but I forgot to make a layer copy way back when, I can copy the image, go back 75 steps in the History, and paste the result over the original from an old history state to blink a before/after comparison.
The thing that's not been mentioned here is Efficiency. I have purposely populated my workstation with a lot of high reliability RAM (16 GB ECC). You might find Photoshop's efficiency going down if your system doesn't have enough RAM to be able to easily manage a deep history... Efficiency matters too, and hammering the scratch disk with a lot of I/O can not only slow things down for you but can also sometimes expose latent instability in a system.
-Noel

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?
Mostly it's to call in for radio contests. The Iphone is really good at making a quick call, but it seems to timeout after 15-20 rings. I realise this is a small thing, but free tickets is free tickets.
Most commenst I see is abotu incoling calls, not outging.
Thanks.

No. You can't do this with any phone.

Can I control the amount of time for timed loop

Similar Messages

Maybe you are looking for