Can I control the system output via Logic Pro?

I know how to record system output in Logic Pro (CH 13&14), but in order to do that, the tracks in Logic Pro must be muted to avoid feedback.
What I'm wondering is if I can control overall system output via a track/tracks in Logic Pro. I've got a Plextor PVR set up so that I can watch tv on my Mac, but when I connect my digital cable box to it the volume is down at around a faint -24 dB. I'd like to be able to boost the gain with Logic.
Thanks in advance for any help!

Never mind. I found a cool app called Audio Hijack Pro that works perfectly for this.

Similar Messages

  • I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

    I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

    I think you're asking 2 different questions.
    The PID control toolset is for using PID loops for control; it's just software.
    The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
    I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
    Mark

  • HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

    Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

    Welcome to the Apple Community.
    To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

  • Where can I find the serial number for LOGIC PRO from the AppStore

    Please help me:
    Where can I find the serial number for LOGIC PRO from the AppStore?
    I bought and downloaded the application, now it asks me for the serial number but I didn't not receive it or can find it.

    My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

  • Where can i find the sample instruments in logic pro x.the proper plugins

    Where can i find the sample instruments in logic pro x.the proper plugins. or third party plugins too where can i find them and how in logic pro x can anyone help me please.

    My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

  • Can you change the color pallet in Logic Pro X?

    Hi there,
    Is it possible to change the colors on the color pallet in Logic Pro X?
    They are too dark for me.
    I would appreciate your replies.
    Thanks and cheers,
    GJ

    @ Eriksimon:
    Thanks for your help.
    Now, I understand that it's a little different. Basically, you can change the values (ranging form 1 to 360) for the 24 upper fields of the Color Palette. (Logic derives the bottom two rows from the top one, making it darker). These values refer to the Hue-color circle. So, you can't change the saturation or lightness ... that's what I was looking for.
    Anyhow, I did change some of the values. In this case it starts with 360 ("real" red) for the first region (01), followed by 15 for the second, 30 for the third etc., stretching over the whole spectrum. (The original values range from 14 to 312 only.)
    Thanks again for your hints.

  • I can't change the track output in Logic X

    Hi,
    I'm running Logic X on OS X 10.9.4, 2.9GHz Intel Core i5, 8GB 1600 MHz DDR3, with various Native Instrument, iZotope and a few other plugins.
    My problem is that I can't chang the output on individual tracks in the Master window. I remember changing it once and now the menu seems to be locked and won't open. I've tried opening a new project and I still can't change the output on the tracks.
    Is there some way I can reset this?
    ~Thank you!

    Oh. I see. We all have different preferences. I don't mind the date on mine though.
    Hope they get to look over this issue.
    http://storeyourpicture.com/images/s...lectronics.jpg

  • How can I upgrade the solo version of Logic Pro 9 to Logic Studio?

    I just would like to know how and where to upgrade logic pro to logic studio

    First of all, Erik is correct.. Logic Studio has been discontinued.. However, there are a few copies left around I am sure... to purchase if you really wanted to...
    But.....
    Unless you really want Waveburner and Soundtrack Pro 3..(Neither of which have been updated for at least a couple of years now..)  there is little point in buying Logic Studio 2... as it will cost you $499... and you can buy Compressor and Mainstage (the other two parts of Logic Studio) for much less than that on the App Store.... and the additional content (that actually took up most of the DVDs in the boxed set) can be downloaded for free within Logic Pro itself.
    I think a newer version is soon to be announce.
    Not of Logic Studio there won't be.. I believe boxed sets of Logic are long dead and gone... and won't be seen again... It's all App Store products from now on...
    There may well be a newer version of Logic Pro on the way.. but no one knows when.... until Apple announce it.

  • Can you reset the hardware assignments in Logic Pro?

    Somehow I have messed up the hardware assignments for the B3 plugin. Is there any way to initialize the hardware assignments? Thanks!

    @ Eriksimon:
    Thanks for your help.
    Now, I understand that it's a little different. Basically, you can change the values (ranging form 1 to 360) for the 24 upper fields of the Color Palette. (Logic derives the bottom two rows from the top one, making it darker). These values refer to the Hue-color circle. So, you can't change the saturation or lightness ... that's what I was looking for.
    Anyhow, I did change some of the values. In this case it starts with 360 ("real" red) for the first region (01), followed by 15 for the second, 30 for the third etc., stretching over the whole spectrum. (The original values range from 14 to 312 only.)
    Thanks again for your hints.

  • How can i download the latest update of Logic Pro X for my non-internet computer?

    This might seem like a daft question but i usually download updates onto a usb stick so i don't have to drag my desktop computer up the stairs only to instal an update...
    Can anyone direct me into the right direction as i am already going crosseyed?
    Thank you.

    Welcome to Apple Support Communities
    If you have another Mac, open the App Store, log in with your Apple ID, go to Purchases and download Logic Pro X. Then, copy it to an external drive (it's saved in /Applications). Finally, copy Logic from the external drive to the Applications folder of your Mac desktop

  • HELP.. can i change the language in my LOGIC PRO ?????

    hey
    i have recently bought logic pro from Apple in France.., but my knowledge of french isnt that good.. is it possible to change the lanuage settings in logic its self from french to english ?
    hope someone knows the answer..
    regards benjamin

    hey justin
    thanks for your help.. problem sorted.. thank god.. now i can get back into the thick of it again.. shame the users manual is in french ..

  • Can you download the extra data of Logic Pro X on a separate hard drive?

    I want to ask if you could download the extra content on a separate hard drive?, I have a SSD so there isn't enough space, a

    Welcome to Apple Support Communities
    If you have another Mac, open the App Store, log in with your Apple ID, go to Purchases and download Logic Pro X. Then, copy it to an external drive (it's saved in /Applications). Finally, copy Logic from the external drive to the Applications folder of your Mac desktop

  • How to record stereo output in Logic Pro X

    I am trying to record the stereo output in Logic Pro X on the spare stereo track. In other words what I would like to do is to record audio/software instruments tracks existing in my project as well as my real time performance on top of that (let's say a software synth played using a midi controller) to a new stereo track, just like if I were recording Logic's stereo out to an external recorder except in this case you are recording that to a spare tracks within Logic X.
    Any help will be highly appreciated.

    Send everything to Bus X - Bus X to StereoMstr (for monitoring)
    Create new Track/Channel
    - for Input choose Bus X
    - for Output choose No Output
    Engage Record on the newly created track and off you go.
    Have a nice day!

  • Can we control the output screen area of alv grid list

    Hi All,
    can we control the screen area of grid control in alv's , not using ooalv's. By default grid list is displaying in the whole screen, but i want  to display this grid list in specific area in output screen , not in full screen, how to set these screen area for this grid control. Please let me know.

    Hi,
    If you use the following parameters
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
    you will get the output in the size expected but it will be in the form of a pop up box and a blank screen at the back and user action like cancel etc will take you back to the selection screen.

  • After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

    After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
    capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.  
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3 
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 4
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit 
    Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

Maybe you are looking for