Can I control when the Review Quiz button appears?

The project I'm working on uses the e-mail results function to send scores to a database. After sending scores, the user needs to be able to review their answers. The problem is I don't see a way to make the Review button's appearance dependent on another action (user clicking send e-mail). If both buttons appear together, a user could review their answers, reload/take the lesson again to improve their score, and then send the report only if they did well.
So the question is: Is there a way to control the Review Quiz button?
I do have a workaround: Make the Review button transparent and put an image of the button on the slide to appear 20 or 30 seconds into the slide, hopefully the user will have reported their answer before the review button appears. But this is a trick and a savvy user might notice it. (Particularly since there are several lessons that they'll take.)
Thanks for your help!
Jenny N

OK, limitation to the workaround.
It doesn't seem to matter where I put the "pause after" control on the slide, the slide pauses about half-way through the slide length. So I have to make the slide length 2x the time I want before the pause (So for a 20 second pause, I had to set the slide length to 40 seconds).
Hope this helps if anyone else tries something like this,
Jenny N

Similar Messages

Getting back the review quiz-button

Hello,
Somehow I deleted the review quiz-button that is shown in the Quiz result-slide. How would I get it back? It happened a while back so Ctrl+Z is long gone .
As I can't add any new buttons in a question slide, I can't work it out that way either.
Any ideas?
Kind regards,
Patrik

Check if the option is enabled in Quiz settings:

Review Quiz button does not navigate to the first quiz question..

Hi,
so I have created an interactive software simulation guide for users of my organisation. At the end of this guide there is a quiz (multiple choice, true or false questions) with 15 slides. At the end of the quiz the results screen is displayed with the "Review Quiz" button. Clicking this navigates the user to slide 72/245 rather than the beginning of the quiz, the first question.
How can this be fixed?!
Many thanks,
Achello

You have an interactive object somewhere on that slide that is scored to be added to the quiz.
Open the Advanced Interaction dialog (F9) and look for the object there. Remove the score.

Getting stuck in the Review Quiz option

Hello,
When from the Quiz results slide, a user clicks the Review Quiz button, it lets the user click through the slides and review, but none of the buttons take the user back to the quiz results slide when they are done reveiwing the quiz. I've seen it work at times and then not work in a later version of the file. Is there a setting that controls this? I don't want the user to have to go back to the outline slide and find the quiz results slide from there.
Thanks for your help.
Cristie Mullins

Hello,
When from the Quiz results slide, a user clicks the Review Quiz button, it lets the user click through the slides and review, but none of the buttons take the user back to the quiz results slide when they are done reveiwing the quiz. I've seen it work at times and then not work in a later version of the file. Is there a setting that controls this? I don't want the user to have to go back to the outline slide and find the quiz results slide from there.
Thanks for your help.
Cristie Mullins

Captivate 3 - Continue and Review Quiz Button Not Working

I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

Hi there
Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
I'll send you back a file that you can use to test and see if the link works.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

When you review quiz, can the answers be personalized?

I have created a quiz containing 14 multiple choice quiz:
I would like to personalize answers (i.e tell them why it is the right answer) to each question when the review the quiz, rather than show them what is right.
I would also like the continue and review quiz button to appear only after they score a certain %
Can these two things be done?
Kind Regards
Simi Ninan

In Captivate 7 and later versions there is a system variable you can use to detect when the user is in Quiz Review mode. You can use this variable to govern Conditional Advanced Actions on quiz slides that will Show or Hide captions that give learners the information you want, only during Quiz Review.
You can hide the Quiz Review button underneath the Retake Quiz button on the Quiz Results slide. The Retake Quiz button disappears as soon as the user has scored a passing score. You cannot hide the Continue button, but you can make disabled unless the user scores a passing score by setting the Quiz > Settings > Required drop down option accordingly.

How can we make the Retake Quiz button only appear when user reenters the course?

In a Captivate 8 Quiz, we need to force the user to close the course (so attempts are captured by the LMS) from the Quiz Results page. The Retake Quiz button cannot show at this time. However, when the learner reenters the course from the LMS, the bookmarking brings the user to the Results page again. We need a Retake Quiz button to only show when the user reenters the course, not on Quiz completion. Disabling the bookmarking disables the reporting of attempts. Does anyone know a way to make that happen or a workaround?

Have a look at my blog post:
http://blog.lilybiri.com/review-only-incorrect-slides-captivate-6
Lilybiri

My iPod Touch will not play through external speakers when it is docked. It only plays through it's internal speaker. All the other functions on the iPod can be controlled by the external speakers (volume,track, etc). How do I fix this?

My iPod Touch will not play through external speakers when it is docked. It only plays through it's internal speaker. All the other functions on the iPod can be controlled by the external speakers (volume,track, etc). How do I fix this?

I would try in oreder:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.

In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?

In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?

Thank you so much for your reply . . . but . . . I should have shared my original script with you -- it was a little more complicated than I led you to believer. I was triggering a group of text fields to become disabled as well as gray. Below is the original script so that when the checkbox is checked, it causes several "Co" fields to be disabled and gray.
// Mouse Up script for check box
// If checked, certain fields should be disabled
var f_prefix = "Co";
// Get a reference to all of the "Co" fields
var f = getField(f_prefix);
// Reset the Co fields
resetForm([f_prefix]);
if (event.target.value === "Off") {
    // Enable the Co fields
    f.readonly = false;
    f.fillColor = color.transparent;
} else {
    // Disable the Co fields
    f.readonly = true;
    f.fillColor = color.gray;
To recap -- my goal is to get those gray fields to revert to transparent if the form is reset. I'm willing to create my own custom "Reset Form" button but I'm not sure I understand how that would look. Wouldn't it be quite lengthy? I think I'm having a brain freeze -- can't figure it out!

Hello everyone, My iphone 5 runs IOS7. It can only rotate when the iphone is already in the sideways, but can not rotate up itself when I turn iphone up. I must tap the assistive touch button to rotate it. This is inconvernient for me.How can I fix?

Hello everyone, My iphone 5 runs IOS7. It can only rotate when the iphone is already in the sideways, but can not rotate up itself when I turn iphone up. I must tap the assistive touch button to rotate it. This is inconvernient for me.How can I fix?

Took my phone to the Apple store this week and they told me it was a hardware/screen malfunction. They replaced the screen for free since it was under warranty. Now it works fine again!

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

this is a perfect question for the users in the iWeb forum. https://discussions.apple.com/community/ilife/iweb. Good luck.

I deleted my review quiz button!

I deleted my review quiz button on accident...and now i can't get it back. It is not giving me an option to undue. I want the learners to be able to review their incorrect answers after taking the quiz. How can I get it back? Can i add my own?

Check Quiz Preferences, Settings, and check 'Allow users to Review Quiz'. It is an embedded object with a very specific functionality, you will never be able to add a custom button that does the same.

HT1212 What can I do when my Sleep/Wake button is broken and I have forgotten my password?

What can I do when my Sleep/Wake button is broken and I have forgotten my password? Also the Find my iPhone app is on and I can't get in to my phone to shut it.

If they determine it is defective, then yes.

When I long press a link, in addition to opening a context box, it also opens the link in that window. How can I get JUST the context window to appear?

I am an avid Pocket user and I like to scroll through various blog sites while saving articles to read later. Typically, I have been using Google Chrome browser which requires me to open each article in a different tab and then share that article to Pocket in order to save it. I was ecstatic when I found out the firefox browser worked very well and even supported add ons. I decided to try it but have run into a major issue. When I long press a link in order to share it, instead of a context window appearing and the website staying the same, a context window opens while the website loads the link. When I right click on a link in my browser, it doesn't mean I want to go to that link so I'm not sure why the same procedure would cause the mobile browser to do so. Is there a way I can long press a link without opening the link in that tab?

Okay, this is silly, but it's the best I could come up with:
I tested on Gizmodo: when the long press menu appears, instead of lifting your finger straight up, slide it down a bit, just off the link, before lifting your finger off the glass. Then the script in the page does not detect a "mouse up" (or equivalent event) on the link. Does that work for you?
I realize you can't actually see the link through the menu, but one or two lines of text height usually will do it.
Probably would make sense for Firefox to cancel all events associated with touching the link once the menu is displayed. Or to make sure the site understands it as a right-click (that seems harder). I haven't checked to see whether any ideas along these lines have been filed in the bug tracking system.
''Edit: Tested on a Nexus 5 (LG).''

Can I see when the last time a user logged was?

Can I see when the last time a user logged was?
Both in local directory and Open Directory

I got the last ~10 logins on the computer, but not the last time a specific user was logged in.

Can I control when the Review Quiz button appears?

Similar Messages

Maybe you are looking for