Can I convert a Lookout application into a labview application?

We here are seriously thinkig to migrate to Labview. There is a complex application done with Lookout 6.0 that we want to convert to a labview application. Having the proper Labview, is there a way of compiling it, open and save, or convert the Lookout application into a Laview application?
Excuse my ignorance in this matter.
Best regrads.
Rudy
Solved!
Go to Solution.

Rudy,
First of all I hope you first question regarding lookout is solved. If so then mark my answer as solution.
For the next time, if you have other questions, which are not related to the one you started the thread of, then open a new thread!
And no, National Instruments don't has drivers for Non-NI Products, so LabVIEW has no driver for your motion card. Anyhow National Instruments has it's own Motion Hardware and Software (ni.com/motion).
And for LabVIEW and Linux just go to ni.com/linux, and you will find supported hardware/software and the linux derivates it works on.
Christian
Message Edited by Christian_M on 11-20-2009 01:28 AM

Similar Messages

How to convert an existing db application into a clustered application

Hi,
I want to know how can i convert my application into a clustered application.
my current application there are 5 modules and thses modules have 5-10 tables in common.Since these modules work simultaeously the processing time gets increased drastically.Is it possible that to have seperate instances of these tables and every module works independently and oracle take care of the consistency.
I want to know if RAC could be the solution?

user8731258 wrote:
Hi,
I want to know how can i convert my application into a clustered application.
my current application there are 5 modules and thses modules have 5-10 tables in common.Since these modules work simultaeously the processing time gets increased drastically.Is it possible that to have seperate instances of these tables and every module works independently and oracle take care of the consistency.
I want to know if RAC could be the solution?Sounds like an application design issue. I think you'd be best served tracing the applications and see where the overhead is being introduced when they do their process concurrently.
Throwing RAC at a poorly developed application would do nothing except amplify the poor design (it'll make things worse).
Cheers,

Can i convert AIFF audio file into an MP3 file please?

Can i convert AIFF audio file into an MP3 file please? I will be doing this on an imac 2008 model. thank you for help!

Since this is the Logic forum and you may be working in Logic, you dont even need iTunes. To convert Aiff to MP3:
1 - Go to the Bin>Audio Files
2 - Select the Audio File you want to convert ( and not a region or edit of it)
3 - Go to Audio File next to the Link icon ( Audio - Edit - View ) and down the menu to Copy/Convert.. gives lots of options
HTAH
(hope that also helps)
MS

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can I convert a pdf file into a usable xcel file

how can I convert a pdf file into a xcel file. the pdf file file is layed out in colums, justified and separated in various types - i need to be able to set colum limits manualy, thanks for your input/

Without further information, I would suggest using either Acrobat or the Export PDF service.

I create name plaques using TypeStyler, but my laser cutter says they must be converted into two vector files; a cut file to cut the outlines of all the letters and an "etch" to etch the letter intersect lines. Can AI convert my TypeStyler file into a cu

I create name plaques using TypeStyler, but my laser cutter says they must be converted into two vector files; a cut file to cut the outlines of all the letters and an "etch" to etch the letter intersect lines. Can AI convert my TypeStyler file into a cut file and an etch file?

Thanks. I might use it soon...
Does it automatically make folders named after the volume labels? And does it handle the conversion of spaces and non-alphanumeric characters to octal codes?
I could read the script but it would be faster for everyone reading, if you leave the answer as a reply.
I also think that there should be some major work done on modernizing the fstab, either by replacing it with a better implementation of file system mounting or changing the file structure and adding in better handling of non-alphanumerics. I don't want to have to look up a stupid octal table every time I type in my labels.

Can I convert my VHS tapes into DVD using iMAC?

How can I convert my VHS tapes into DVD by using iMAC?

From VHS to DVD
http://www.macworld.com/article/1030972/fromvhstodvd.html   <<< click here.
How to Convert a VHS to a DVD for Mac OS X
http://www.ehow.com/how_6515774_convert-dvd-mac-os-x.html   <<< click here.
Roxio unveils VHS to DVD converter for Mac
http://www.macnn.com/articles/09/05/26/roxio.vhs.to.dvd/   <<< click here.
How to Convert VHS to DVD on Mac OS X
http://www.daniusoft.com/tutorial/burn-vhs-to-dvd-on-mac.html   << click here.

Can I convert a PDF back into a PUB file?

Can I convert a PDF back into a PUB file?

Use Acrobat XI (Pro or Standard) to export the PDF to Word.
Use Calibre to bring the Word file into ePub.
Be well...

How can I convert a Word document into Adobe PDF format?

How can I convert a Word document into Adobe PDF format?

You can use Adobe Acrobat or Adobe CreatePDF.

How can you convert a PDF File into a picture format for uploading?

How can you convert a PDF File into a picture format for uploading?

If you have Acrobat 11, you'd select: File > Save As Other > Image
and select one of the available image formats.

Embed a Flash Application into a Flex Application

Hello everybody,
I'd like to know if there is a way to embed a Flash
Application into a Flex Application. My goal is to wrap Flash apps
in Flex Modules, and I don't know how to do it.
I know it is possible to embed swf by using @Embed and an
mx:Image tag, or to use flash content by creating a flash swc
component. However these two solutions don't allow to call the
methods of the Flash app.
On the other hand, it is possible to load a swf file via the
Loader Class, and then call the methods via loader.content. But
with this solution I can't embed the swf in my flex application and
I have to load it at runtime.
Any ideas ?

Look into SWFLoader.
Be aware though, you can not directly access AS2/FP8/Flash8
swf's from within an AS2/FP9 app. Local connection is used in this
case.
There are dataType and timing issues with SWFLoader. Here is
a complete example:
http://www.cflex.net/showfiledetails.cfm?ChannelID=1&Object=File&objectID=690
Tracy

Can we convert a T-Code into WebService.

Dear SOA Gurus,
Can you please tell me if there is a way to convert a SAP T-Code into a Web-Service. Also, can you please share your thoughts on how I can convert an ABAP report into a WebService and call it from Java stack.
Thanks!
Surya.

It depends on your requirement. Olivier is right though - there's no direct realtionship or conversion tool. However, if you are just trying to obtain the data that a particular custom transaction or report provides without rewriting the logic, you can wrap the report or transaction call in a function module and hand-off the data through ABAP memory to the function module interface. Then, convert the function module or group to a web service. I do this most often with monster reports that generate PDF's. Instead of actually rendering the PDF on the desktop as the report would do from SAP, I push the binary data to an external application which opens the PDF in a browser window.

Can I convert from pdf output into excellsheet in smartforms

My smartform output is in pdf form now .Can i convert it into excellsheet by using save option.
Moderator message: please do some own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 12:49 PM

Video into PDF? Sounds reasonably strange. In any case, the only way to use such files would be to extract the components in Acrobat. Select the actual video with the Touchup Object tool, righ-click, save to disk. Depending oin the specifics of the PDF fiel this may not work, though.
Mylenium

How can i convert this data(00000000) into date format(yyyy-MM-dd)

Hi,
i am using this method to convert date format from string.
public static string FormatDate(string inputDate, string inputFormat)
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
string datepresent = DateTime.Now.Date.ToString("yyyy-MM-dd");
return datepresent;
its working properly,
but when input data is like 00000000 i am getting error this is not valid.
how can i convert this into date format any help..!

Have you tried the above code:
I can see it is working with both Date and DateTime destination nodes.
Map:
Functoid Parameters:
Functoid Script:
public static string FormatDate(string inputDate, string inputFormat)
string datepresent;
if (inputDate == "00000000")
datepresent = "0000-00-00";
else
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
datepresent = date.ToString("yyyy-MM-dd");
return datepresent;
Input:
<ns0:InputDateString xmlns:ns0="http://DateFormat.SourceSchema">
<DateString>00000000</DateString>
</ns0:InputDateString>
Output:
<ns0:OutputDate xmlns:ns0="http://DateFormat.DestinationSchema">
<Date>0000-00-00</Date>
</ns0:OutputDate>
If this answers your question please mark as answer. If this post is helpful, please vote as helpful.

Can I convert a Lookout application into a labview application?

Similar Messages

Maybe you are looking for