Can i convert a non layered file to a layered file bases on used colors?
can i convert a non layered file to a layered file bases on used colors?
I have heard questions like this before.
Some people seem to think that each colour should be on a separate layer.
I hope you are not one of them, because it is a complete misconception and defeats the object of Illustrator’s object stacking system.
Why do you think you need to collect objects of the same colour onto separate layers?
Similar Messages
-
How can we convert .mov ( implemented by quicktime APi) to .WAV file
Hi,
How can we convert one .MOV audio file (generated by quicktime API) to .WAV audio file ( need LINER - encoding format).
Here I dont know the encoding format of .MOV audio input file.
regards,
Ramsmfrasyid1 wrote:
I wonder why this happens? The "unable to handle.." really does come out twice. Is it because the inputfile.mov which I wanna convert comes from the merging oftwo wave files? If so, then how can I convert this into single wave file? Thank you.That is a weird message, but yes, the .mov file probably stored the 2 original WAV files as 2 tracks of data, rather than 1 track. So whenever it's trying to transcode to a WAV file, it fails to transcode both tracks.
As for fixing it... I dunno. I know that JavaSound can mix two WAV files at the sample-level, so it actually mixes the sound instead of adding 2 tracks to a file...but I don't know why that's giving you those error messages, unless perhaps it's trying to transcode the video track into an audio track (perhaps the code isn't smart enough to handle transcoding a video file into an audio file? You'd have to check the code to see if that's the case...) -
I need to convert thousands (yes, really) of wma files to m4a. The wma files are all located in different folders and each converted m4a file needs to end up in the same folder as its respective original wma file. Does anyone know of an application that can do this?
Thanks,
WillI'm not completely sure that MPEG Streamclip can convert AVCHD footage (.mts files). If MPEG Streamclip doesn't do the job, then get a copy of Clipwrap, which was designed for transcoding .mts files to QuickTime/Apple Intermediate Codec (that's the format/codec you need to convert the .mts files to for use in FCE).
-
I want to convert these points(see spreadsheet file attached) into a 1-D array of numbers and plot them using a vi. I am using the readfromspreadsheet.vi and it just gives me a number 4 and plots that. Please tell me what to do...I'm confused and have a project due!!!
Attachments:
ec1.xls 14 KB
test.vi 14 KBSave the excel spreadsheet as tab delimited text file and use "Read From Spreadsheet File" vi to read it.
-
My disc drive on my 6 year old MacBook died. I bought an iMac with OS10.9, but it will not allow me to open Appleworks files from my backup drive. Does anyone know of a method to transfer or open Appleworks 6 files in Pages or Numbers for OS 10.9? I need those files.
Thanks
XAV8RHello,
> It coped much better with my Draw documents than the older version
Normally, I have added many functionnalities, retrieving the bitmap, gradient, ... But there remains some problem when a group/frame shares some shapes and a picture or when a shape crosses differents pages, the result can be become bad, ...
> a number of lines missing on page 3
I suspect there are here, ie. if you select in page 3 the big gray square with two ellipses and remove it, there seem to reappear ( I do not know why this square insists to hide the other shapes even when I put it in background, ....)
> the lines are very much thicker than they should be
All objects are thicker than they should be, mainly because I need to create a embedded Odg for each shapes. This will change in LibreOffice 4.3 because we have added in the parent library of libmwaw, functions to create shapes directly ; at least for line, rectangle, ellipse, probably not for other shapes...
> I can add that to my page when it gets out of beta, (Perhaps you could announce it in this forum as it is relevant to AW and I don't want to keep checking the LO website.)
Ok, I will try to add a message when LibreOffice 4.2 will appear ( note: as I only write an extension used in LibreOffice, I also do not keep checking the LO website, I only check now and then that all is working ). -
Previously an example was provided as a solution for measuring low frequency transfer functions using swept sin mode with a DSA 4551 card. I currently do not have access to 6.1 and would like a copy in 6.0 if possible. Original file is attached. Thanks.
Attachments:
Zoom_Analysis_Example_from_NI.vi 137 KBThe VI you attach does not perform a Swept Sine analysis but a Zoom FFT analysis
This example ships with NI-DSA and is available for LabVIEW 6.0 from :
http://digital.ni.com/softlib.nsf/websearch/E497D1707F9868478625694300761ADF?opendocument&node=132060_US
Please also note that NI-DSA 1.2 is now available and our web site will be updated very soon.
NI DSA 1.2 includes new examples as well as a Software user manual.
This user manual is available for download at :
http://digital.ni.com/manuals.nsf/websearch/032430F78301D4A986256AC7004DFC52?OpenDocument&node=132090_US
I hope this will help.
Gerald -
How can I Convert Multiple Music tracks into one track or file
I Have Mix Cd's with multiple tracks on them,,,,,,,,I am trying to Convert these tracks into one Track,,,,,,is this process possible thru Itunes or do I need to buy a software for this,,,,,,I see there is a Join Cd Tracks button but it is not highlighted for me to select it,,,,,,,,PLEASE HELP,,,,,,THANKS
Can anyone help?
-
Handbreak is available on Windows platform, however its conversion speed is too slow!
I hope there are some tools that can combine my converted video together with my audio track and subtitle, and I can select between audio or subtitle inside my iPhone 4.
Anybody can help me??Hi,
Have you found a solution for this? Can anyone help with this?
If I have a video track with multiple alternate audio tracks how can you play this on iOS?
Thanks,
Apurva -
I use a website in my daily work activities that I need to have multiple sessions of the website open at any given time. Natively, I cannot have multiple sessions open in a single browser (separated tabs or separate windows) without one session taking over the other. Internet Explorer has a command line option (-nomerge) that will allow me to accomplish what I need. The target line of the IE shortcut properties would look like this:
"C:\Program Files\Internet Explorer\iexplore.exe" -nomerge
Is there a similar solution for Firefox?
I am running Windows 7, IE11 and Firefox 26
Thank you in advance,
RobertHello rpvincent, try
* firefox.exe -new-window <url>
(the url is without < >)
see also : http://kb.mozillazine.org/Command_line_arguments
thank you -
Can you add a Purchase Order with Sales Order as its Base Type using DI-API
Is it possible to set the basetype on a PurchaseOrder document line to 17 to create a document as you would using the Procurement Confirmation Wizard in the UI?
I am using 8.81 SP00 PL09.Anyone?
We already have code to automatically generate Sales Orders using the DI-API, and if we could automate the create of the Purchase Orders as well, it would save a lot of end-user time.
We would like to do it with the Base/Target references set so that end users can navigate between them in the UI.
You can do it with the Procurement Confirmation Wizard, and I would like to know if it is possible to replicate this functionality through the DI-API or if I should move forward by just creating the Purchase Orders without reference to the Sales Order and using a UDF to tie them together. -
Converting a class object back to a .class file
Hi,
How can i convert a class object back to a .class file ? Thanksany pointers on how to do it then ? i don't have
access to the native codeIf I have understood you correctly, you have native code that generates bytecode. Currently you load the class this bytecode represents right into the classloader, but you want to save it to disk as a .class file. Right?
If so, you just have to get hold of that bytecode before it "disappears" into the classloader, and save it to disk. How you can best do this depends on exactly how you communicate with that native code.
If I have misunderstood your problem (and that's not unlikely), please try to be clearer. -
Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played on non-apple music devices that do not support the M4A format?
Hi,
This is what apple says about converting files http://support.apple.com/kb/PH12167
Jim -
Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played in non-apple music devices that dont support the M4A format?
Yes, of course it is legal.
To convert the format, follow one of these documents:
iTunes 11 for Windows: Save a copy of a song in a new file format
iTunes 11 for Mac: Save a copy of a song in a new file format
Also note that you have the option of buying your files in MP3 format in the first place, from Amazon MP3 or other online retailers. MP3 files will work in iTunes as well as virtually every other player, program, and device. -
I create name plaques using TypeStyler, but my laser cutter says they must be converted into two vector files; a cut file to cut the outlines of all the letters and an "etch" to etch the letter intersect lines. Can AI convert my TypeStyler file into a cut file and an etch file?
Thanks. I might use it soon...
Does it automatically make folders named after the volume labels? And does it handle the conversion of spaces and non-alphanumeric characters to octal codes?
I could read the script but it would be faster for everyone reading, if you leave the answer as a reply.
I also think that there should be some major work done on modernizing the fstab, either by replacing it with a better implementation of file system mounting or changing the file structure and adding in better handling of non-alphanumerics. I don't want to have to look up a stupid octal table every time I type in my labels. -
I can't convert .cr2 canon raw files with DNG converter.
I have a Canon 1000D, and im trying to open RAW files to edit in cs4. Everytime i open it, photoshop says that it doesnt recognise this type of file, but i open my friends RAW file (450D) and it can read it. I have also downloaded DNG converter, and it comes up with this message (first image) but my folder has .cr2 files......im really lost
I have also asked for help on the photoshop forum, but they referred me here...
ThanksThat file is only 2.7 megabytes. Raw files are usually larger. That likely means it's truncated (cut off prematurely).
You haven't selected one of the modes called sRAW (Small Raw) have you?
Like Tai Lao, I was able to extract a JPEG, and the EXIF data for the JPEG seems to be intact:
Filename - _MG_6825.CR2
ImageWidth - 1936
ImageLength - 1288
BitsPerSample - 8 8 8
Compression - 6 (JPG)
Make - Canon
Model - Canon EOS 1000D
StripOffset - 42212
Orientation - Top left
StripByteCount - 228990
XResolution - 72
YResolution - 72
ResolutionUnit - Inch
DateTime - 2011:05:23 12:15:31
ExifOffset - 270
ExposureTime - 1/4000 seconds
FNumber - 5.60
ExposureProgram - Aperture priority
ISOSpeedRatings - 1600
ExifVersion - 0221
DateTimeOriginal - 2011:05:23 12:15:31
DateTimeDigitized - 2011:05:23 12:15:31
ComponentsConfiguration - YCbCr
ShutterSpeedValue - 1/4096 seconds
ApertureValue - F 5.66
ExposureBiasValue - -2
MeteringMode - Multi-segment
Flash - Flash not fired, compulsory flash mode
FocalLength - 115 mm
UserComment -
SubsecTime - 03
SubsecTimeOriginal - 03
SubsecTimeDigitized - 03
FlashPixVersion - 0100
ColorSpace - Unknown (0xFFFFFFFF)
ExifImageWidth - 3888
ExifImageHeight - 2592
InteroperabilityOffset - 37768
FocalPlaneXResolution - 4438.36
FocalPlaneYResolution - 4445.97
FocalPlaneResolutionUnit - Inch
CustomRendered - Normal process
ExposureMode - Auto
White Balance - Manual
SceneCaptureType - Standard
Maker Note (Vendor): -
Macro mode - Normal
Self timer - Off
Quality - RAW
Flash mode - Not fired
Sequence mode - Single or Timer
Focus mode - One-Shot
Image size - Large
Easy shooting mode - Manual
Digital zoom - None
Contrast - Normal
Saturation - Normal
Sharpness - Low , -32769
ISO Value - 32767
Metering mode - Evaluative
Focus type - Auto
AF point selected -
Exposure mode - Av-priority
Focal length - 18 - 200 mm (1 mm)
Flash activity - Not fired
Flash details -
Focus mode 2 - 65535
Auto ISO - 100
Base ISO - 1600
White Balance - Sunny
Sequence number - 0
Flash bias - 0 EV
Subject Distance - 0
Image Type - Canon EOS 1000D
Firmware Version - Firmware Version 1.0.7
Owner Name -
Camera Serial Number - 2950600230 (AFDE38438)
Camera Temperature - 17 C
Sharpness (1D) - 0
Directory index (450D) - 142
File index (450D) - 1
File number - 000 - 0000
Sharpness (A0) - 0
Thumbnail: -
JpegIFOffset - 38124
JpegIFByteCount - 4087
-Noel
Maybe you are looking for
-
How to create and use Data Vault with HTML/JavaScript (SAPUI5) for Mobile Apps?
Hello, I am creating a demo Enterprise Mobile App, for cross platform and I want to use the Data Vault. I am not able to figure out how to implement the Data Vault with HTML/JavaScript i.e. SAPUI5 for cross platform mobile apps I have a tutorial, but
-
How Can I record Phone Interviews in Garage Band for a podcast?
Hello...I have a Blue Snowball microphone, IMAC, and Garage Band 3.0.2. I would like to record phone interviews in Garage band and be able to keep the incoming call at a high enough and clear enough level. So I am not to loud and they are not to low.
-
Dear Experts , How can i default the cost element for a service PR based on . 1. with using service master . 2. Without using service master . Reagards Anis
-
Optimize application does not empty FAC2 and FACTWB tables
Hello everyone, I am currently using OutlookSoft 4.2.338 and recently came across the following problem: Optimize application fails to empty FACTWB and FAC2 tables, even though it says "Successfully finished" -Whenever I run an optimize process direc
-
Old Airport card not recognizing Apple Airport Router.
Hello there, I've just been given an old G4 (digital audio) to use for university and after doing some research brought an old Airport card off of ebay. After putting into the relevant slot and plugging it in, it started to recognize all of my neighb