Can I convert a widescreen DVD movie to 4:3 format

Is there any application that can convert a widescreen DVD movie to a 4:3 format to fill the whole screen on my Ipod.

You don't need to, just render the movie full size in HandBrake. Once its in your iPod, go to video settings and set Widescreen to OFF. This setting effects all files and can be changed anytime.

Similar Messages

  • How can I convert my iPhone 5 movies to a DVD to play in DVD players?

    How can I convert my iPhone 5 movies to a DVD to play in DVD players?

    Here's one way:
    https://itunes.apple.com/us/app/video-to-dvd/id569680533?mt=8&ign-mpt=uo%3D2
    Or, you look for software like this:
    http://www.aimersoft.com/how-to-burn/iphone-video-to-dvd.html

  • How can I convert my Tiger DVD into a CD without spending more money?

    How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
    Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

    Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
    I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
    Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
    All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
    If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

  • How can i convert a quick time movie file to a cd that will play in a car stereo?

    how can i convert a quick time movie file to a cd that will play in a car stereo?

    In quicktime, I would try File -> Export -> Audio. It will create an audio file. Then drop it onto your playlist into  iTunes. Burn the list from itunes with File -> Burn to disk    and then select Audio CD.
    If you have Quicktime  7 it should be easier and export to AIFF directly

  • DVD movies to iPod video format

    I often travell on official business, I am trying to rip a DVD to my ipod. My friend told me that Sothink ipod- converter can convert DVD movies to IPod video format. I have downloaded and try it,I think the Sothink IPod Video Converter is designed to be an easy company for my IPod.
    IBM   Windows XP   no

    If you want a really organized package for ripping your dvds into .mp4 "ipod" format use the dvd Decrypter and Videora ipod conveter. They are very organized and they put you in control of the video/audio settings... And it couldn't be easier. Here are the links if you wanna give these FREE programs a shot
    Videora ipod converter - http://www.videora.com/en-us/Converter/iPod/
    Dvd Decrypter - http://www.mrbass.org/dvdrip/
    ps... You need both because after ripping your dvd it becomes a .vob file..Ipod cannot read this so you must use videora to make it an .mp4 "ipod friendly" format.. Reply if problems occur please!!! Thanks...

  • How can i convert a window media player file into a format playable on ipod

    hey guys can you tell me how can i convert an widdow media player file into a format that can be played on my ipod, i used videora ipod converter but it can't convert the window media player file

    the program you show change wma to mp3, but the mp3 file can't be understanded by the iPod, how can i change a wma file to a format understanded by the Ipod?

  • How can I Convert a TeamViewer .tvs recording to other video formats?

    How can I convert a TeamViewer .tvs recording to other video formats in OSX v 10.9?

    This feature does not seem to be implemented in the Mac version.
    You'll have to convert the file using TeamViewer on Windows ;(

  • Does QuickTime Pro convert an ISO DVD movie to an mp4?

    I'm thinking about purchasing the Pro version of QuickTime; but what I REALLY want to do is convert some ISO DVD Image files to the QuickTime mp4 format so I can put it on my iPod or view it with my AppleTV.
    Does anyone out there know if this is possible BEFORE I spend money on this?
    Thanks,

    Does anyone out there know if this is possible BEFORE I spend money on this?
    QT does not support "muxed" MPEG2/PCM or MPEG2/AC3 au either purchase the QT MPEG-2 Playback Component ($19.99) and download the free MPEG Streamclip app or use the free HandBrake app to convert your DVD imaged content MP4/M4V content for playback on mobile devices.

  • How can I convert rm file to .mov?

    Hi,guys
    Can anyone tell me what software is used for converting RM file to MOV file?
    Thanks

    I had the same issue, however I used this program to transfer ...avi,mpg,wma..etc...;
    http://www.videora.com/en-us/Converter/iPod/
    I'm pasting this from the Videora site, the settings worked for me when others didn't, enjoy:
    Configuring videora converter
    0) Start Videora iPod converter.
    1) Click setup in the left nav.
    1.5) Click the profiles tab.
    2) Click new profile.
    3) Now, configure that profile:
    profile name: ipod
    in the video settings section...
    mode: MPEG-4 > CBR
    resolution: 320x240
    passes: one
    bitrate: 768 kbps (384 kbps also works)
    framerate: 29.97 fps
    in the audio settings section...
    bitrate: 128 kbps
    sample rate: Input
    channels: stereo
    4) Click apply to save the profile.
    Now, you're ready to transcode.
    1) Click convert on the left nav.
    2) Click the transcode new video button.
    3) Pick your source video. Mine was an AVI from a torrent.
    4) Under quality profile, choose "ipod", the profile you created using the steps above.
    5) Click start.
    Now you're ready to get the video on your ipod
    1) In iTunes, under the File menu, select add file to library. Find the transcoded one. By default, the transcoded videos pop out under the Videora install directory.
    2) Drag and drop to your ipod.
    Questions/observations:
    1) I haven't been able to get H264 anything to work. Is it broken? How much smaller than MPEG4 is it?
    2) 768 kbps video was about 400 megs/hour; 384 kbps video was about 231 megs/hour. I could readily see a difference in video quality.

  • Qosmio G30: How can I install only Ulead Dvd movie factory from Recovery image

    Hi everybody
    I have question about Ulead dvd movie factory.
    First, I bought my G30 with XP when it was the moment of the offer "vista for a few euros".
    So, I installed Vista with the official CD from Toshiba. But there was no longer Ulead Dvd movie Factory. As the XP's restoration CD is only an image disk, I can't install from it.
    Has anybody a solution for me?
    Thank's.
    BR.

    I think there is a solution!
    I found the Ulead DVD Movie Factory utility on the Toshiba page.
    I searched in the Qosmio G30 area but without to be successful.
    But I checked other sections and selected Satellite Satellite A series Satellite A200 (PSAEC) Vista and found the Ulead DVD Movie Factory 5.51.0147.03 version
    Download it a try to install this tool.
    Should works!

  • Mac Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. You can also convert from AVI to MPEG or other major formats.

    What is tyhe best video /audio converter to use on a Mac? To convert
    Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. to convert from AVI to MPEG or other major formats?

    I prefer using Mac Video Converter software to do video conversion. I convert Quicktime MOV to AVI so that I can play the video on PS3.

  • How can i convert a .wmv to .mov or .mpg?

    I don't need to convert the file so I can view it.
    I'm hosting this video on a website and I want to enable users the option to download the file in either .mov/.mpg4 format or .wmv format.
    Does anybody know if there is a free converter out there?
    Also, I have VLC for my .wmv's but it stopped working recently. Now when I try to play a .wmv in VLC the video doesn't work, but the sound does, and I get this error message:
    "main: no suitable decoder module for fourcc `WMV3'.
    VLC probably does not support this sound or video format."
    Thanks,
    Jacob

    I find the free iSquint to be the easiest GUI for these projects...some people dump on it since the interface is so simple, but just use the Advanced Mode if you want to tinker.
    http://www.isquint.org/
    Alternatively, if you have QTPro, you can download and install the Flip4Mac beta for intel components (posted in this forum) - that way, QT will play the WMV file natively and you can simply "save it" as a .mov. I've pretty much left VLC in the dust for even attempting to play WMV files after installing the F4M beta. It is, of course, still invaluable for a zillion other reasons.

  • How can I convert an AUDIO MPEG-4 to an MPEG3 format? I need it for a Powerpoint Presentation

    How can I convert an AUDIO  MPEG-4 to another type of file, such as MPEG3  or mp3

    Use Handbrake.
    You can download it for free from this site:
    http://www.macupdate.com/info.php/id/12987/handbrake
    Good luck

  • How can I convert the ITHMB photo files to PC readable format like JPEG?

    How can I convert the ITHMB photo files on my new Iphone 4s to a PC readable format like JPEG

    Look at the link and follow instructions to convert the file taken from a different thread in this forum:
    https://discussions.apple.com/thread/2640386?start=0&tstart=0

  • How can I convert Music Videos or Movies to play in iTunes ?

    I am running Windows 7 Professional and I have alot of Music Videos and Movies that I am wanting to play in the new iTunes ( 11.1.5.5 ). I am trying to find a good Program that can convert alot of these so I can import then into iTunes . I do not have Quick Time installed on my computer , to see if they will play on Quick Time. I play most of them with the VLC Player . My computer just will not give me the option of playing most of them with iTunes , so I realize that most of them are not compatible with iTunes .

    Here's one way:
    https://itunes.apple.com/us/app/video-to-dvd/id569680533?mt=8&ign-mpt=uo%3D2
    Or, you look for software like this:
    http://www.aimersoft.com/how-to-burn/iphone-video-to-dvd.html

Maybe you are looking for