Can I convert Labview panel to Labwindows/CVI uir file

I a project that I want to convert from labview to Labwindows\CVI.
I don't want to call my VI's from LabWindows.
It is possible to convert some Labview fronts panels to *.uir files (Labwindows/CVI)
Thanks

Hi Artus!
Unfortunately there is no automatic way to convert a LabView Front Panel into a Labwindows UIR.
The only way you can do this is by creating a new interface and adding all the elements that you need, but this way would actually mean rebuilding everything based on something you already have. Sorry about the bad news
I wish you the best day!
Oswald Branford

Similar Messages

How can I convert a project from LabWindows/CVI 2010 to a Visual Studio 2011 project?

I have a good sized project, 12 source files, 14 headers, 1 uir, that I want to be able to edit and compile in MS Visual Studio 2011, MSVC++.
I remember being told that LabWindows dropped support for C++ in 2008 and no longer had a wizard for converting projects. I know I can go the DLL route, but I have never created a DLL before and wouldn't know where to begin with it. What would be the best way to go about this conversion?
Solved!
Go to Solution.

CVI 2010 still supports the Visual Studio Conversion Wizard for Visual Studio 2005/2008. We do plan to add support for VS 2010 in a future release.
If you need a VS 2010 project now, you can use the Visual Studio 2008 conversion wizard, then upgrade the VS 2008 project to VS 2010.
National Instruments
Product Support Engineer

Testand will not convert my labWindows CVI sequence file to a TestStand sequence file.

Testand will not convert my labWindows CVI sequence file to a TestStand sequence file.
Attachments:
ACC3.squ ‏3 KB

If you are using an older version of the CVI Test Exec toolkit, check with your local Field Sales rep to see about getting the necessary software to use for temporarily upgrading your existing Test Exec sequences to version 2.0 for migrating to TestStand.

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

Can I convert a PDF back into a PUB file?

Can I convert a PDF back into a PUB file?

Use Acrobat XI (Pro or Standard) to export the PDF to Word.
Use Calibre to bring the Word file into ePub.
Be well...

Can not find imaqView3D function panel in labwindows/cvi!

followed what the on-line support told me (add the imaqView3D function declaration into my source code), it does not still work! So seek help from you! thanks so much!

David,
You will probably have a better chance of having your question answered if you posted your question to the Vision or LabWindows/CVI Developers Exchanges.
Regards,
Erin

How to pass Visa Resoure Name parameter to labview dll in labwindows/cvi

Hi, everyone
I build a dll from labview, the prototype is : double getchannelpower(double f, uintptr_t *VISAResourceName);
I don't know how to pass VISAResourceName to this function.How can I get the VISAResourceName of this type(uintptr_t *)?
Is it related to the paremeter ViPSession in function viOpen(ViSession sesn,ViRsrc rn,ViAccessMode am,ViUInt32 ti,ViPSession vi)?
BRs,
lotusky

1. uintptr_t *VISAResourceName in the labview dll is connected to viOpen function as input parameter internally.
2.I can call the labview dll in labview via CLF Node, when the VISAResourceName parameter is set to Numeric(32-bit int or 32-bit usigned int) OR Adapt to data(Handle by Value). And I got the value of the VISAResourceName parameter, which is 0; When I directly connect 0 to the dll, it still works. But in labwindows, when I pass 0 to the VISAResourceName parameter of the dll function, I got a FATAL RUN-TIME ERROR: The program has caused a 'General Protection' fault.
mkossmann 已写：
Could you check what exactly uintptr_t *VISAResourceName in your labview dll does.Might it be that it is connected to the labviews Dll internal ViOpen() ViSession output parameter ?. And the name VISAResourceName is misleading.
Another idea would be that Labview uses 32bit Unicode for the ResourceName. And you have to convert the C String to that Unicode first.

How do i Convert c++ program to LabWindow/CVI

I

Hi Heater,
There's no direct way to convert C++ code into CVI.
The best you can do is to compile C++ code into dll, and import it into CVI.
You may refer to http://zone.ni.com/devzone/cda/tut/p/id/3341 for more information.
Regards, Kate

How can I convert 400 data points from a spreadsheet file to an array?

The spreadsheet file contains over 5000 data points (in one column) of which I only want the first 400 and want to convert them to an array in Labview. I tried to use the 'readfromspreadsheet' vi but it wasn't much help. Please tell me how i should approach this problem and what vi's to use.

I attach a model vi that you can experiment with. You will need to know the formatting of the data in your file, from there -plus the delimiter- you'll be able to estimate how many characters makes the first 400 data point. It's possible to develop a more robust vi to do this, in the mean time, the attached vi can quickly give some answer.
Attachments:
model.vi ‏28 KB

How can I convert a home movie on dvd(vob file) to edit on imovie?

I had home movies converted to a dvd- the files are vob. Now I want to edit the movies in imovie.
I am having a difficult time converting from vob straight to mov files.
I purchased Quick Time Pro thinking that could do it, but I haven't been able to.
Also, it just says QuickTime Player Version 7.6.4 (518.35) on my computer.
Is it supposed to say QuickTIme Pro?
Thank you in advance for any help you can provide.

The "Pro" option just unlocks a lot of features in QuickTime Player. If you look at the registration info, it will show if you have Pro installed.
For converting DVD's you have two options; hardware or software.
The hardware option involves connecting a DVD player's analog outputs to a qualified "DV device" (DV camcorder, VTR or converter) then connecting the DV device's Firewire port to your Mac to capture the footage.
The software option involves using an application like DVDxDV or MPEG Streamclip to convert the DVD's VOB files into an editable format that works natively with your chosen NLE.
-DH

Can I convert each playlist into one single mp3 file

I have had great success creating and burning a playlist to a CD however I'd really prefer to save an ENTIRE playlist of about 20 songs as a SINGLE MP3 file. I can then I burn each file (composed of songs in a playlist) to a CD and have a nice set of organized music set/PLAYLISTS to listen to. I stated my question in this manner because I've seen many similar questions but they are not what I am asking. I am using WIndows 7
What I have tried:
1.) ...selecting the group of songs within the playlist and exporting as an MU3. My results: It created an MU3 file that played for less than 1 second when played in anything other than itunes. In itunes it opened as the same playist I began with
2.) ...consolidating the files (the goal was to consolidate into one MP3 file) but once I selected the consolidate option I could not find that file under itunes Media which is the location where itunes says it would be stored.
3.) ..converting to MP3 Result: It just converted each individual file to MP3 format and NOT the entire list as a SINGLE MP3 file.
Does anyone know if there is a way to accomplish this?
Thanks in advance
D

Sorry to disappoint you, Chris... but I don't "take their product". Someone WHO WORKS FOR THEM "gives it to me". There's a MAJOR DIFFERENCE between someone handing you something that's theirs to hand you... and stealing it.
In 2006 I saw Sara Evans "perform" in Tucson. She flew on her congressional (then) husband's private plane from Portland to Orange County, refueled and flew to Tucson, where she got into a limo, and rode to the show. She got out of the limo, went straight backstage, I saw someone hand her a Dr. Pepper, which she opened, took a sip out of, and then went out on the stage as the headline act for the evening. She sang six (6) songs in twenty-three (23) minutes, walked offstage, did no encore, and got back in the limo, which whisked her back to the waiting jet to fly home.
The station manager of the radio station that sponsored the concert, later told me that she was paid $125,000 for that twenty-three minutes. Even he felt like the station didn't get their money's worth. The promoter paid for the jet fuel and her pilots' salaries.
In 2009, I went out to Phil Vassar's "motor coach" after a show, which is basically a house on wheels. He showed two friends and I the "studio" in the middle of this converted bus, where he can record new tracks and send them straight to the record company via satelite, for their final editing. The front has a full kitchen & living room and a 50" flat screen TV with a massive audio system. HE owns the whole thing, and when he doesn't feel like riding, he has a private plane of his own that will pick him up wherever they can land and fly him to the next show. His promo guy gave each of us a copy of every CD he's ever released before we left.
I have no problem with people making money for their work. But I've seen just how much is given away in the music industry, and I'm not going to refuse things offered to me because someone with a private jet and limo, getting $6000 a minute, or with a half million dollar "rolling house" isn't getting paid for the things their own people are handing out in bulk.

How can I convert a Pages document to a jpeg file?

I need to convert a design I created in Pages into either a jpeg file or creat an "object" out of the design. I can't figure out how to do either one. Thanks for any help you can offer!

Hi Susan,
1. I think that there was a missing comma in Peter's reply:
Copy your design switch to Preview .app go command n and your design becomes a pdf.
Copy your design[,] [and then] switch to Preview .app go command n and your design becomes a pdf.
2. In your reply: couldn't find Preview. app.
On my Mac, Preview is listed in Launchpad, and also in Finder > Applications folder.
Thank you posting a reply.
Regards,
Ian.

How can I convert e-mail messages to either PDF files or Microsoft Word?

I want to be able to convert my Thunderbird e-mails to either PDF files or Microsoft Word. It doesn't matter which. I want to be able to do this so that they can be saved on a flash drive in readable form for anyone who is interested in them.

How about a text file?
Right Click-Save As-Text File

How can I convert a feature length HD 25fps .mov file to NTSC and preserve the exact duration?

Hello all
I seem to stumble over a small but significant timeline distortion: I'm trying to convert a full-length feature film file (1:52:07:01) from the source file, which is full HD at 25 fps to .m2v in NTSC for use on DVD. The picture quality is excellent, especially with highest quality settings, but even using Frame Controls, allowing Compressor to choose the ideal frame rate and setting the duration of the target file at 100.000% of the source file, the result has now repeatedly been 7 seconds shorter than the original. (Which, by my estimation, would in fact be about 0.1% out, so more than the tolerance thresold indicated.)
Ordinarily, this might not be a big problem, if it weren't for the fact that the film is subtitled in three languages and this means that from about a third into the film now these subtitles in DVD Studio Pro appear progressively out of synch. (And anyone working with DSP will know how cumbersome shifting subtitle clips is...)
Any help greatly appreciated.
Many thanks
Sebastian

thanks again russ for your help with this - i've been able to solve the problem. i did try your approach, though for reasons which probably have nothing to do with anything, the export didn't complete and i ended up with a file that suddenly stopped, twenty minutes short of the ending.
in the mean time, though, i rendered both picture and sound out at 100.1% of the source file duration (which is the relative length compressor calculated when i used frame controls to set the output file to precisely the absolute lenght of the source file) and this seems to have worked. i now have an NTSC formatted .m2v and an .ac3 file, which are in synch with each other and with the original time line and therefore with the subtitles.
hope if anyone comes across a similar issue, this may be useful to know.
many thanks & all best

I can't convert SW2010, ProE W5 and UG NX7 files from APEX 9 !

Does anyone know if there is a schedule on when Solidworks 2010, ProE WildFire 5 and UG NX7 formats/files will be supported by Acrobat Pro
Extended 9?
The last versions of these software have been available since last year ...
The last 3D update of APEX was APEX 9.2 version in 2009,October.
Why don't we receive any 3D updates on APEX? no schedule from ADOBE.
Thanks in advance,

There are no announced plans to add new file support to Acrobat 9 Pro Extended, and 3D import translation has been discontinued in Acrobat X, which will only read U3D and PRC files.
Users are now directed to the plugin from Tetra4D, who have taken over development of the 3D engine from Adobe. Their software for Acrobat X Pro does support the latest versions of those files, but will not work with Acrobat 9. See the link for a full list of formats.

Can I convert Labview panel to Labwindows/CVI uir file

Similar Messages

Maybe you are looking for