Can I convert MC340LL/A to MC340B/A

I'm in the UK and I've just bought a MC340LL/A Airport Extreme (it should be delivered today). I am aware of the differences between the LL/A (US) and the B/A (UK) versions of the Airport Extreme. The LL/A doesn't have channels 12 & 13 on the low band and on the high band there are only channels 36 to 48 in common between the two models. This is OK as the high band is particularly uncongested around my home so I can happily use the lower channels in the high band and I use channel 6 on the low band anyway (all the other networks around me use channel 1!)
Making the assumption that the hardware is identical between the LL/A and the B/A (both are model A1354) is it possible to convert a LL/A to a B/A?
I can think of three possible ways it may be possible...
Possibly by flashing the B/A firmware onto the LL/A (Is there separate firmware?)
Is it as simple as an option of choosing the country in setup somewhere which will enable/disable the appropriate channels? (remember I don't have the AEBS yet, so I haven't had a chance to play with it yet).
Has anyone taken one to pieces and seen jumpers/diodes which select the country/channels?
Or is it just not possible?
Alan

www.treodesktop.com
Post relates to: None

Similar Messages

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • How can I convert an int to a string?

    Hi
    How can I convert an int to a string?
    /ad87geao

    Here is some the code:
    public class GUI
        extends Applet {
      public GUI() { 
        lastValue = 5;
        String temp = Integer.toString(lastValue);
        System.out.println(temp);
        showText(temp);
      private void showText(final String text) {
        SwingUtilities.invokeLater(new Runnable() {
          public void run() {
            tArea2.setText(text + "\n");
    }

  • How can I convert an InputStream to a FileInputStream ???

    How can I convert an InputStream to a FileInputStream ???

    Thanks for you reply, however, I am still stuck.
    I am trying to convert my application (which runs smoothly) to a signed applet. The following is the original (application) code:
    private void loadConfig() {
    String fileName = "resources/groupconfig";
    File name = new File(fileName);
    if(name.isFile()) {
    try {
         ObjectInputStream in = new ObjectInputStream(new FileInputStream(fileName));
         pAndGConfig = (PAGroupsConfig)in.readObject();
         in.close();
         return;
    } catch(ClassNotFoundException e) {
         System.err.println("++ERROR: "+e);
    } catch(IOException e) {
         System.err.println("++ERROR: "+e);
    System.out.println("Can't find file: " + fileName);
    Because all code and resources now reside in a Jar file (for the signed applet), I must use the following line to access the resources:
    InputStream is = this.getClass().getResourceAsStream(fileName);
    I then need to convert the 'InputStream' to 'ObjectInputStream' or 'FileInputStream' so that I can work with it.
    I would be very grateful if you could help shed some light on the matter - Cobram

  • How can I convert an OVM vm (.img) to VDI (virtualbox)?

    Hi,
    how can I convert an OVM vm (.img) to VDI (virtualbox)?
    Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi?
    tnx & regards,
    S.

    Hi,
    "VBoxManage convertdd" solved.
    Regards,
    S.

  • How can I convert an AUDIO MPEG-4 to an MPEG3 format? I need it for a Powerpoint Presentation

    How can I convert an AUDIO  MPEG-4 to another type of file, such as MPEG3  or mp3

    Use Handbrake.
    You can download it for free from this site:
    http://www.macupdate.com/info.php/id/12987/handbrake
    Good luck

  • How can I convert from color balance in FCE to color balance in FCPX?

    Let me start off by saying that I've been having an issue with a project in Final Cut Express - a project I'd put a lot of time into and thought I was finished with. Before continuing on, I encourage you to take a look at my other thread: https://discussions.apple.com/message/18702933?ac_cid=op123456#18702933
    Realizing that there may be no one who can walk me through fixing my project as is, I decided to download a trial version of Final Cut Pro X and see if I could replicate my project there and have more success (after all, it was only a matter of time before I switched anyway).
    So, in my original project in FCE, I keyed a lot of frames with different color balances. I downloaded the Ripple Training color balance effect to do just that, but the sliders are set up differently. In FCE, they range from -1 to 1. In FCPX, they range from 0 to 1. I'm wondering how I can conveniently convert the values from FCE to FCPX. Being terrible at math has made this much harder.
    Just by drawing a diagram, like the following, I can figure out the basics:
    FCE
    [-1]-----[-.5]-----[0]-----[.5]-----[1]
    is equal to:
    FCPX
    [0]-----[.25]-----[.5]-----[.75]-----[1]
    Since I have very specific numbers, not all of which can be easily converted using a basic diagram like the one above, I definitely need some help here. For example, one of the values in FCE is .77. What would that be equal to in FCPX? It's probably something simple, but like I said, I'm stupid when it comes to math.
    Thanks to anyone who can provide me with some help here, although I still hope that I'll end up having no reason to redo everything in FCPX.

    Well, the "math answer" is .885…but I'm afraid that's not likely to be of much help. FCPX and FCE have absolutely nothing in common, including filters land color correction. So even if you sent the time comverting all your numeric values, I'm guessing you'll wind up with a mess and be very frustrated with all the time wasted in the workaround.
    If I read your original FCE thread correctly, I if it were my project., I'd do a test on a short clip in X to see whether yoi can the effects and quality you expect. If you can, great.  Build you project from scratch and learn a new NLE at the same time.
    Good luck.
    Russ

  • I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    It's almost impossible.  The new iMacs have a Target Display Mode, but it's built to do that.  Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15.  In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
    By the way, I found your answer by searching this forum.  I would suggest using the search function here in the futuere.

  • How can I convert an array off byte into an Object ?

    Hi folks...
    I�m developing an application that comunicates a PDA and a computer via Wi-Fi. I�m using a DataStream ( Input and Output ) to receive / send information from / to the computer. Most off the data received from him is in the byte[] type...
    How can I convert an array off byte ( byte[] ) into an Object using MIDP 2.0 / CLDC 1.1 ?
    I found on the web 2 functions that made this... but it uses a ObjectOutputStream and ObjectInputStream classes that is not provided by the J2ME plataform...
    How can I do this ?
    Waiting answers
    Rodrigo Kerkhoff

    There are no ObjectOutputStream and ObjectInputStream classes in CLDC. You must know what you are writing to and reading from the DataStream. You should write the primitives like int, String to the DataOutputstream at one end and read those in exactly the same sequence at the outher end using readInt(), readUTF() methods.

  • Can  I convert JarEntry to File?

    Hi :
    if i have a instance of JarEntry class,how can i convert it to a instance of File? is it impossble? if yes,what should i do?
    Mile

    Hi ChuckBing:
    i'm implementing DSMCCOject class and ServiceDomain class.A ServiceDomain is mapped to one JAR File; a DSMCCOject is mapped to one entry in the JAR File and DSMCCOject extends from java.io.File,
    if i directly use the entry path in the Constructor method of DSMCCOject ,many functions of java.io.File can't be used, i don't know whether the path is wrong or other reasons, but i can get the instance of JarEntry correctly,so i try to convert it to a instance of File. is it right i think like this?
    Thanks
    Mile

  • How can I convert a class file to Exe file

    hai
    How can I convert a class file to Exe file

    Please search the forums before asking questions - this has been answered hundreds (really!) of times.

  • How can I convert multiple files at one time and not one at a time

    How can I convert multiple files at one time and not one at a time

    Hi Plissey1950,
    Sorry for the lengthy delay to a response.  Are you trying to convert multiple files to individual PDF files at the same time? (not combine them).  If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
    Thanks,
    David

  • How can I make a pdf book with "camera to pdf" option on phone? I can only convert one pic at a time

    How can I make a pdf book (single pdf file with several pages)  with "camera to pdf" option on phone? I can only convert one pic at a time. ( Or )how can I attach all those pictures converted pdf's into one pdf file which obviously results in to a single pdf file with several pages in it ?

    Adobe Reader on the iPhone is a PDF reading app. It's not a creation app.
    You need to get an app like Pages which is intended for page layout. It can place pictures from the phone and export PDF.

  • Can I convert tracks from one format to another so that the converted tracks appear in the various playlists of the originals?

    I have a large number of tracks which I should like to convert from one format to another (aiff to Apple lossless).  These tracks are distributed in a large number of playlists.  Can I convert a track or tracks from one format to another so that the converted track appears in the playlist of the original track without going through a laborious and error-prone process of converting each track individually, determining the playlist of the original, and allocating the converted version to the playlist (or playlists, because in many cases the original track exists in more than one playlist) of the original track.

    I do not believe iTunes will do this.  The files created are essentially new media files, not regarded as replacements for old files.  There may be ways to trick iTunes if you are good at editing library files but that would be more trouble than it is worth.
    You can check the site below but I do not recall having seen such a script.
    Dougscripts - http://dougscripts.com/itunes/scripts/scriptcount.php?sortBy=Name&op=y - Many itunes scripts
    If you're into writing Applescripts you could try it.

  • I recored a video with my ipad, downloaded it to my mac but I cant upload it to Youtube because the format IMG is not a video format. How can I convert it?

    How can I convert a video I took with my ipad on the format IMG to a supported format for Youtube?

    To upload videos to YouTube we have to make sure videos are in a format that YouTube accepts. Here’s the list of some well-known video formats which YouTube supports:
    WebM files (Vp8 video codec and Vorbis Audio codec)
    MPEG4, 3GPP and MOV files – (typically supporting h264 and mpeg4 video codecs and AAC audio codec)
    AVI (Many cameras output this format – typically the video codec is MJPEG and audio is PCM)
    MPEGPS (Typically supporting MPEG2 video codec and MP2 audio)
    WMV)
    FLV (Adobe – FLV1 video codec, MP3 audio)
    But I think you get the wrong video file. iPad recorded video files are in m4v, mp4, mov, avi format but not the img files. Anyway, if you need a video converter, Format factory or iFunia video converter are good choice.
    Good luck!

Maybe you are looking for