Can I convert the existing OBISE one to OBIEE ??
Dear All,
Is it possible to convert the existing OBISE one to OBIEE ??
Regards,
Mahesh
Hi Mahesh,
What is the version of OBISEOne you are using?
Regards,
Kalyan Chukkapalli
http://123obi.com
Similar Messages
-
How can i convert the quantity of one unit to other unit in BI 7?
Hi ,
I have developed an RFC function module in SAP BW (BI 7.0).
For this function module I have to populate material number and Quantity required and UNIT.Every thing working good. If the user forgets to enter unit or enters other unit where Quantity in ODS is not mentioned in terms of that unit.WE have to Convert the Quantity requested into the Qunantity that exist in ODS or DATA BASE based on the unit of measure .
Please suggest me how can I convert the UNIT of measure of quantity?
Thanks,
Suresh.I have to do this with conversion table /BIO/PMAT_UNIT.
IN THIS TABLE I DON'T KNOW HOW CAN I CONVERT?
REGARDS,
SURESH. -
How can I convert my existing tunes to work on an MP3 player?
I have purchased a CBC radio show from Itunes and want to put it on an MP3 player. It appears the file format is not compatable. How can I convert the existing files to MP3 format??
Thanks.If it has Apple FairPlay DRM on it, you can't simply "convert it" to MP3. You must first burn it to a CD, then import it again into iTunes. Make sure your import settings have MP3, and match the native bit-rate of the original track.
If it's a regular AAC audio file, then simply change your import settings to MP3, then right-click the file and choose "Create MP3 Version."
Bryan -
How can I convert an existing table to IOT
Hi,
My Oracle version is 10.2.0.4
Below is my structure of my test_table .
It has 1141580 rows.
I want to convert this into index Organized table. It has no secondary indexes.
How can I convert an existing table to IOT.
CREATE TABLE test_table (
Column1 NUMBER NOT NULL,
Column2 DATE NOT NULL,
Column3 VARCHAR2(100) NOT NULL,
Column4 VARCHAR2(8) NULL,
Column5 VARCHAR2(40) NOT NULL,
Column6 VARCHAR2(3) NULL,
Column7 NUMBER NOT NULL,
Column8 NUMBER NULL,
Column9 VARCHAR2(32) NULL,
ALTER TABLE test_table
ADD CONSTRAINT test_table_pk2 PRIMARY KEY (
Column1,
Column2
USING INDEX
STORAGE (
INITIAL 30720 K
ALTER TABLE test_table
ADD CONSTRAINT test_table_cons1 FOREIGN KEY (
Column1
) REFERENCES test_table2 (
Column1
/alter table doesn't allow to change the organization of a table.
So the logical answer to your question is
You can not
and your question
redundant.
As most other questions here.
So the answer should have been
- create a new table
- insert all rows
- drop the old table
- rename the new table
Oracle is not about rocket science.
Oracle is about reading documentation and using brains.
If you do that, maybe, one day, you will be a bigboy.
If you keep asking redundant questions you will remain a littleboy.
Sybrand Bakker
Senior Oracle DBA -
How can I convert multiple files at one time and not one at a time
How can I convert multiple files at one time and not one at a time
Hi Plissey1950,
Sorry for the lengthy delay to a response. Are you trying to convert multiple files to individual PDF files at the same time? (not combine them). If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
Thanks,
David -
How can I use the button in one panel to control the other panel's appearing and disappearing?
How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle -
How can you move the objects from one server to another?
how can you move the objects from one server to another?
Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK -
How can I convert the ringtone (m4r file) I made into an mp3 file on itunes?
How can I convert the ringtone (m4r file) that I made into an mp3 file on iTunes? I want to put it on a CD, but I can't figure out how to convert it. I didn't buy it, I made it by converting a YouTube video into an mp3 (I wanted to get the little song in the video for a ringtone.) I'm not sure what to do.
Hello ed2345,
Thanks for the help, but this is not the problem.
It's hard to describe the problem, but I'll try it again, this time with pictures.
I was left with the following folders in the iTunes Downloads folder.
http://www.picfront.org/d/7yb3
These TMP Folders have a download.m4a and a Info.plist file.
After moving the audio files in iTunes a bit I get this.
http://www.picfront.org/d/7yb2
As you can see no other Information for the download.m4a than the length.
That's how the .m4p file looks like
http://www.picfront.org/d/7yb1
And this is how the same .m4a file currently looks
http://www.picfront.org/d/7yb0
Like I said, I could edit all these download.m4a files by myself but that would leave some information out.
Note: Sorry, I hope the links do not spam you with annoying ads. I don't get any but I was told that there can be some annoying one. -
Can we rename the existing z-program in SAP-abap
Can we rename the existing z-program in SAP-abap. If yes, than how it can be done. But actually we don't want to copy the code from the existing z-program to the new one which will be created. We just want to make rename the existing z-program in SAP-abap. Please suggest, how it can be?
Edited by: akg.amit on Oct 20, 2010 7:40 AMHi Amit,
In SE38 Open the program with old name. Press the RENAME button. In the Target program field provide the new name of program name. This new name for program should not exist in your system. Click on the Rename button. It will give a pop-up where it ask if you want to rename any includes in that program. I assume you dont have any includes in the program. So press the Rename button again without selecting the "Include" check box. Now it will ask for the Transport request. Provide your Transport request number. The program will be renamed.
Regards,
Immanuel. -
I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network
I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.
You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network. -
Can I convert the file format of purchased songs?
I'm trying to put together a movie for my kids with a song I purchased through iTunes but it is a mp4 file - which will not work in my movie-making software! Can I convert the song to mp3??!! Help!!!
Yes, but it's a 2 step process. First, burn the mp4 file to a cd, like one you can play in a regular player. Then import the cd back as an mp3 file (you set this up under preferences, import tab). I do this to all of my iTunes songs because they are worthless unless I can play them on devices other than my iPod.
-
I have a 27" iMac with a broken hard drive. Is there a way to convert the existing hardware into a display monitor without too much technical work?
You don't state what iMac it is or what you want to use it for an external display with so we cannot answer the question. But without a bootable drive, no you cannot. However you can get the internal HD replaced or you can connect an external HD and boot from it. Without some basics about the computer it's impossible question to answer. However you may find what need in Apple's Target Display Mode: Frequently Asked Questions (FAQ)
-
How can I convert the attribut lastLogon ...
Hi,
How can I convert the attribut lastLogon on an Active
Directory Microsoft?
Attributes ar = ctx.getAttributes(dn, attrs);
if (ar != null) {
for (int i=0; i<attrs.length; i++) {
Attribute attr = ar.get(attrs);
if (attr != null) {
String values="";
for ( Enumeration vals=attr.getAll();
vals.hasMoreElements(); ) {
values += vals.nextElement();
if ( vals.hasMoreElements() )
values += "\t";
entry += SRV.SEPARATOR + values;
When I take the value of the restrained attribut of the
enumeration how I make convert it for example in a date ?
I am using Windows2000 Advanced server.
An example of lastLogon attribue is "126949578544450976".
Any help is greatly appreciated.
R.F.It looks to be the same format at accountExpires.
If so, your in luck, I worked that one out back in January:
http://forum.java.sun.com/thread.jsp?forum=51&thread=346718 -
Can we delete the existing fields in standard Infotypes.?
can we delete the existing fields in standard Infotypes? if it is possible give me the procedure.
Hi,
use transaction code PU00
Or
u should use HR_INFOTYPE_OPERATION function module.
This is the std one for all he infotype related operations.
Regards -
How do I best integrate existing laptops for a new server? Can I use the existing home folders on the laptops and make them into Network Users?
Yes it will work. I've done it for a few users in my small office. As with anything, there are quirks that you may or may not experience. Most quirks are app-related, due to app developers hard-coding absolute paths into their apps for things like temp files (Photoshop). Strategies for resolving these sorts of quirks can be found via google. You would probably have seen these quirks already when using server-based home folders for your kids. If you haven't noticed them, then you're probably fine.
The tech note you cited should be fine. It doesn't explicitly say so, but you'll need to enable ssh on your server, at least temporarily, so you can upload your home folder to the server using scp, rsync, etc. Don't try to copy the files up to the server via Finder.
Once all your files are transferred to the server and in the right place, make sure to chown them on the server, so they are owned by the userID you created for yourself on the server.
As with anything this involved, make a good backup of your laptop first.
Note I have one user that isn't too happy with the responsiveness of the periodic mobile home syncing. She has about a decade of e-mail in her home folder, probably 50 to 100 emails per day, many with attachments. Mobile home syncing takes a long time to check and sync this huge tree of itty-bitty files, eevn with server-side file tracking turned on. The other users are happy.
The nice thing about mobile home syncing is that when a user "graduates" to an age where they've earned their own laptop, you can change them from a server home user to a mobile home user, with a minimum of fuss. Also, if you lose or break a laptop, you can add a new replacement laptop to your network, and pull-down a replica of the home folder from the server, with almost no downtime.
Maybe you are looking for
-
Is there a way to create a line consisting in two different lines?
Like the lines that appears in maps: some are single lines (black stroke) but there are others that are f.e. a yellow line with other red thinner line inside. Can someone tell me how to do that? i'm drawing a map and it would be so much better if I
-
Cannot Print/Save PDF To Destination
I have historically created PDF files from various applications with the ability to save the PDF document to a specific destination folder. Now when I choose Adobe PDF 8.0 from the Mac printer options, the new PDF file is created and located on my de
-
To all those having problems converting videos ...
... it might be worth giving this application a go that's from Nokia themselves - it's called Nokia Video Manager http://europe.nokia.com/A4370009 Regards, Edward
-
How to remove the passcode from i pod touch
How do I remove the passcode from my I pod touch, I am not so concerned about security, since I only hve music and books on my ipod, but would like bypass the passcode page. Does anybode have the solution for this? Thanks
-
Audio out of Synch in Prem Pro CS4 after editing in Soundbooth
This is using the Mac version of Premiere Pro CS4 and Soundbooth. I Premeire, I choose to edit the audio portion of a clip in Soundbooth. In sound booth I just add some compression or other sweetening and save it (only adding effects no cutting of th