Can I convert the optical output to analog for a zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

Can I convert the optical output to analog via a converter for zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

These will probably help.
[http://www.jsresources.org/examples/audio_conversion.html]

Similar Messages

The old Apple TV had a port for Analog the new one does not. Where do I find a (TosLink), Optical to Analog Audio for the Optical Output on the Apple TV so I can run my Analog outside speakers?

Where do I find a TosLink, Optical to Analog Audio for the Optical Output on the Apple TV 2?

click here for information.

How can i convert 2k resolution dpx files of a movie to DCP and will they be able to open the harddisk and view the files?

how can i convert 2k resolution dpx files of a movie to DCP and will they be able to open the harddisk and view the files?

AFAIK, this is beyond the capabilities of FCPX/Compressor. This company makes a plug-in, which I have to say I have no experience with. Here is a thread that may give you some other ideas. Good luck.
Russ

What is the optical output bit/sample rate of an Apple TV3 when using the wired network connection. 16/48 or 24/48.

What is the optical output bit/sample rate of an Apple TV3 when using the wired network connection. 16/48 or 24/48.

It doesn't matter what type of network connection it has its output is 16/48.

I purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

Problem with both the speaker and earphones?
Have you tried another pair of headphones?
Yu can try the standard fixes to rule out a software problem:
- Reset. nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentione

I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentioned since they were purchased. Is there any way to get the ipad music transferred to the computer?

And they were definitely purchased from the iTunes store, they show on the account's purchase history (Store > View Account on a computer's iTunes, or you can view the last 90 days purchases via http://reportaproblem.apple.com) ?
You could potentially log into the account on that computer's iTunes (Store > Sign Out to log out of your account, that will then change to a Store > Sign In option) and redownload them by clicking on the id towards the top right of the iTunes screen and Purchased on the popup :
But that will potentially tie that computer to that account for 90 days : Manage your associated devices in iTunes - Apple Support
Or do you have a different computer that you could redownload them on and then copy them over to that computer via a flash drive or memory card, and then add them to its iTunes via File > Add To Library ?

TS4107 I have to use the optical output to my receiver for my surround sound ( it does not decode HDMI). After updating the software on my Apple TV the optical no longer works. The HDMI to my TV works and provides sound to the measly TV speakers. WHY?

I updated my software as "recommended" and my optical output is not working anymore to my receiver and thus no surround sound. My HDMI to the TV still provides the picture and sound to the TV. My receiver only uses optical and was fine BEFORE the software was updated. How can I go back to the prior software or fix this? My Apple TV is the earlier 720P version. I have tried restarting on the Apple TV and then unplugging and reinserting all plugs to no avail. It provides no optical sound on Netflix, Youtube and other selections but does via HDMI only to the tinny TV speakers. ANY IDEAS?

GO to your Dolby Digital settings, and toggle the options.. Auto, On, Off. That worked for me, and a few other people.

Can I convert from pdf output into excellsheet in smartforms

My smartform output is in pdf form now .Can i convert it into excellsheet by using save option.
Moderator message: please do some own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 12:49 PM

Video into PDF? Sounds reasonably strange. In any case, the only way to use such files would be to extract the components in Acrobat. Select the actual video with the Touchup Object tool, righ-click, save to disk. Depending oin the specifics of the PDF fiel this may not work, though.
Mylenium

4.4.3 killed the optical output. I thought it was supposed to fix it.

4.4.2 killed airplay, but the update that is supposed to adress the optical out has now made it so that my optical out doesn't work. Go figure. Now I have to listen to Netflix through the little crappy TV speakers. This is so very un-Apple like. Come on, let's get this thing working again. It was fine before this stupid update.

I'm having the same problem my optical audio output won't work ever since updating to 4.4.3 .ANYONE FROM APPLE OUT THERE LISTENING??

Airplay through the optical output of my Apple TV to my stereo?

I cannot figure out how to use my Apple TV to stream music from the units optical output to the corresponding input on my receiver. Any suggestions? Seems simple enough....

Thanks, but yes, I have the output of the Apple TV connected to an input on the receiver, and the receiver is programmed to use that input. I also changed the audio/video settings to 16 bit and no Dolby per apple instructions but that did not work either, any other ideas. I want to stream the same output via HDMI and optical to two different receivers, no luck so far.

How can I convert a bitmap image into an array in LabVIEW 6.0.2, then to a spreadsheet for further analysis without NI-IMAQ or Vision?

I do not have NI-IMAQ or NI Vision.
I acquired the image using a picolo board then just saved it as a bitmap file.

You want to convert it to an array of what? Of numbers? Of LabVIEW colors?
The "Read BMP File.vi" VI outputs a 1-D array of the pixels, but I suspect it is not exactly in the format that you need. I am NOT sure, but I think that each group of 3 elements of that 1-D array (which is inside the cluster "image data" that the VI outputs) represents the red, green and blue levels of a single pixel (but it may be hue, saturation and lum.). Also, since it is a 1-D array, you would have to divide it by the width (which is also included in the "image data" cluster) to get some sort of 2-D array of data.
You can find the "Read BMP File.vi" VI in the functions palete> "Graphics & sound">"Graphics Formats".

HI, i am using a 17inch macbook pro which i bought in January 2011. Lion 10.7.3. I have used a HDMI cable from my second display and used the thunderbolt adaptor to get access to this second screen. However, every time i do this,i lose my internet? help?

I am using a 17inch macbooj pro that i bought in Jan 2012. Runs Lion 10.7.3. I used a second non apple screen and used a thunderbolt (DVI to thunderbolt) adaptor to used my screen. However everytime i do this my macbook pro loses its internet connectivity. I also use the firewire for my audio external soundcard but dont think this makes any difference.
Any help please?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Can i use a hdmi to mini display port cable to use my iMac as external monitor for a windows laptop?

Does anyone know if a hdmi to mini display port cable can be used to link a windows laptop with an 27 inch iMac to use the iMac as an external monitor. Or are there other options to connect my DELL latitude 6430?

Is the 3.5mm-to-optical cable any better than using a standard 3.5mm? I don't know too much about this stuff. My thought process was that if the source of the connection is a 3.5mm jack, does it make a difference using a cable that starts as a 3.5 and converts to optical?
Chances are excellent that if your receiver is less than 20 years old it has an optical input, this is a digital signal which will sound MUCH MUCH better than using an analog 3.5MM to 3.5MM connection. I recommend using the cable suggested or one with the same connections but of a different length if your needs warrant it.

Since I upgraded my Ipad2 with IOS6, i keep getting kicked out of Safari after I am in the middle of looking for something and on Ebay it continually kicks me back to the first item if I click to see a picture, say after I am 150 items down. Even CNN too

Since I upgraded my Ipad2 to IOS6, I keep getting kicked out of Safari after I am in the middle of searching for something. Also, Ebay kicks me back to first item if I click on an item, say number 153 or 642! Very annoying. Even CNN kicked me out back to Ipad home screen last night! How do I make it stop???

My question is this:
What is the best way of getting the pictures out of the iPhoto Library? I
Select the photos you want out and export them as JPGEs - kind = current for the current edited version - kind = original for the original
f I get access to the original folders within the library by right-clicking any photo and then being able to browse inside the library, am I going to have any problems if I copy or move those original pictures directly to a folder outside of the iPhoto Library?
Copying photos out will not be a problem if you make no errors - for me that is not a good bet - it is best to stay out of yoru iPhoto library
Would it be better to export the pictures?
Yes
Does exporting using "current" under "Kind" give you the original more safely?
No - it gives you the current version which may be the original if no changes have been made or will be the current edited version if edits ahve been made
Also, any suggestions on how to best have photos OUTSIDE of an iPhoto library organized so that iPhoto can reference them, but your backup is also organized?
In the iPhoto preferences un check the advanced preference to "copy imported items to the iPhoto library"
HOWEVER - this is not recommended - it makes importing more complicated, deleting more complicated and makes replacing a hard drive or going to a new computer much more difficult - and it puts you totally in charge of your original photos - being sure that they are there and do not get moved
I'd like to have my photos organized by date in the backup as well, so that I don't have to backup all my pictures every time I add new ones, just add the latest to the backup drive.
Finally, any suggestions on what to do with pictures that you scan so that they appear by the date they were taken as opposed to the date they were scanned? Is there a way to modify the date of the photo info?
Select the photos in iPhoto and use the batch change command under the photos menu - the tiem and date option
LN

HT201328 Please help! can I unlock an iphone 4 which I purchased w/ no ATT contract at Ebay? I want to bring it go my family in El Salvador, carriers down there only support ATT

If anyone can help out there, will be very much appreciate it.
The iphone4 I bought on Ebay was for AT&T, no contract. My family in El Salvador have the phone4 and have ask me to find out how to unluck it so they can use any carrier/sim card.
Can I have AT&T unluck by using the serial number of Phone since I never used it here in the U.S?
Thank you!
[email protected]

Only AT&T can unlock an iPhone.
The following is from their website:
What are the eligibility requirements for unlocking iPhone?
All requests for iPhone unlock must meet general iPhone unlock eligibility requirements before an iPhone can be unlocked.
AT&T will unlock an iPhone under the following circumstances:
The person requesting the unlock is:
A current AT&T customer, or
A former AT&T customer who can provide the phone number or account number for the account.
The iPhone was designed for use on the AT&T network.
All contract obligations, including any term commitment, associated with the device to be unlocked have been fully satisfied.
The iPhone has not been reported lost or stolen.
Given the above it is very likely the iPhone you bought may not be eligible to be unlocked at all.
I recommend you return the iPhone to the eBay seller and demand a full and complete refund.

Can I convert the optical output to analog for a zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

Similar Messages

Maybe you are looking for