Can I copy between systems with different R/3 releases/add-ons?

hi,all
help me!

Notes 19574 and 24853 provide basic information about this. The main or basic release must always be identical. Support Packages and add-ons should also have the same status in both systems. Only then can the consistency of the data be guaranteed.
For instance, if an add-on is only installed in the source system, the remote copy will terminate with a reference to differences in the dictionary or missing tables in the analysis phase, and will not make the copy. The remote copy terminates if not all data can be copied, in other words if, for instance, a field is missing in the target system, a field is too small or a complete table is missing. You can include individual tables and, from Release WAS 6.10, also development packages (formerly development classes) in the source system in an exception list, to avoid the termination. See note 557132 for further information.
The export does not experience this problem with the transport because the target system is not checked during the export. On the other hand, differences in the dictionary or missing tables are subsequently reported as errors during the import but this does not result in any termination. All of the data that can be imported is imported. In this respect, different ADD-ONs would not pose a problem for the client transport. to what extent is the data consistent or useable?

Similar Messages

Can i do client export import between systems with different patch levels

we want to do a client export import between two systems. As I understand the patch levels should be the same in both for this to happen..
But right now I am in a situation where time is a big constrant. The basis patch level is on par. But the rest are not. Can I do client import successfully at this stage.

The only thing that may stop it working could be additional functionality between the systems.
I work on XI and there is a huge difference between SP12 and SP15. We were able to do the transports between systems, but as Dev was patched before QA, and the transport was reliant on standard settings not being available, it still went though, but we had to transport it again after applying SP15 to QA.
Again, it probably depends on what System you have running on Netweaver...

Distributed File System Replication between servers with different performance

If Distributed File System Replication is set between servers with different performance. What will happen with the performance of the fastest server? Will the performance decrease to match the performance of the
slowest server in the chain? I mean, will the source slow down (processor speed) if the recipients can't keep up?

Hi,
If you mix different performance server for DFS replication, most of improvements on the fastest server are disabled for backwards compatibility and the performance decrease to match the performance of the slowest server.
For more detailed information, please refer to the article below:
Tuning replication performance in DFSR (especially on Win2008 R2)
http://blogs.technet.com/b/askds/archive/2010/03/31/tuning-replication-performance-in-dfsr-especially-on-win2008-r2.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can I backup two devices (with different documents) to one iCloud account? For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

Hello Apple Community,
Can I backup two devices (with different documents) to one iCloud account?
For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud). Is this possible?
This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
iphone backup.
Thank you in advance!

Terminology check here. Do you really mean a "CD"? There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
Read references for Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
The above can get pretty complicated. You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

Can't copy between Classic and OS X

Hi,
i carbon copied a OS 10.4 installation to a new disk, then copied an os 9 folder to that same disk in the root directory. Now i get an error message that i can't copy between classic and os x, an error message that keeps on appearing.
Both the os x.4 and the classic version worked before on that same mac, but on different disks... any chance why this won't work anymore??
G4 Mac OS X (10.4.6)

Hi Peter. Welcome to the Forum…
Please give the exact wording of the error message, and a brief description of the circumstances.
How many disks were involved in copying OS 10.4 to a new disk, please? It can work but it's not reliable to clone from the boot volume, so you should really do that only with a third disk to boot from…
Are there no other symptoms? Everything but copying works fine?

[svn:bz-trunk] 13716: since include-read-only is a server global setting, we can't have two channels with different value.

Revision: 13716
Revision: 13716
Author:   [email protected]
Date:     2010-01-22 09:26:12 -0800 (Fri, 22 Jan 2010)
Log Message:
since include-read-only is a server global setting, we can't have two channels with different value. remove the test for the include-read-only false. update the service-config.xml as well.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ReadOn lyTest.mxml

You can give this a try on your Ultimate machine. While these are said to be for Vista, I used it on my Win 7 machine just fine and it fixed the problems I was having. Hope it works for you.
The problem is that Vista, by default, will only use NTLMv2 for authentication, which is not supported by Mac OS X's Windows Sharing service.
The other problem is the Minimum Session Security for NTVLM SSP based Clients.
To get around this:
1.     In Vista, open the Control Panel
2.     Switch to "Classic" view
3.     Double-click Administration Tools
4.     Double-click Local Security Policy
5.     Or Secpol.msc
6.     Expand "Local Policies" and select "Security Options"
7.     Alternate : Type secpol.msc to get editor up then
8.     Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
9.     Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
10.     Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
11.     Change the setting from "require 128 bit" to unchecked (No Minimum)
12.     Click OK
the real difference between vista and windows 7 procedure is 10 and 11

How many people can be on the system with a 512 K connection in BPC 7 MS

Hi,
It appears that BPC uses a large piece of the band width and more than one computer and user with a 512 K connection using BPC will not work.How many people can be on the system with a 512 K connection? -BPC 7 ms version.
Thx
PLN

I would like to precise more things regarding the network.
I did a case study for one customer and really to have good performances with SAP BPC client the network required the follow:
Bandwitdth 1024kb/s
Latency smaller than 200 ms between BPC client and BPC server
Otherwise the users will experience problems:
1. IBandwitdh < 1024Kb/s then to download 80 MB or more (templates + dimensions) will require a lot of time and that's means the login time will be very slow every time when a dimension is changed or security is process
2. When an report is executed (a medium report not very complex report) around 100 mesage are send between bpc client and server. So if latency > 200 ms than a simple calculation is saying just into network it will be lost 200 * 100 ms = 20 s.
So for a report which normally is taking 5 - 10 second it will take 30s or even more into client with latency bigger than 200 ms.
Regards
Sorin Radulescu

Can two peeps use iChat with different accounts on the same computer?

What do I do to REMOVE an old AIM account and replace it with a new account in IChat?
Can two peeps use iChat with different accounts in the same computer?
(Actually, two people share a laptop, but one of us cannot use her AIM account cuz mine is in iChat already... And, when traveling, I have the computer - and I would like to use iChat on the computer...)

In iChat 4 you can have more than one AIM Valid name logged in at once.
AIM valid = AIM, @mac.com or a MobileMe name.
What you are then stuck with is that iChat is linked to one Buddy Picture and The one Mac User Account's Address Book which may or may not have Full Names, emails details, or a Nickname in iChat 4 linked to the Screen Names.
Whilst it does let you both log in whilst using one Mac User Account there are drawbacks about who uses the keyboard and reading meesages from the other persons Buddies.
8:50 PM Sunday; November 30, 2008

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for this OS.

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for OS Maverick.

VueScan
VueScan FAQ

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can I sync two ipods with different ID on the same computer?

can I sync two ipods with different ID on the same computer?

Hi,
Yes you can as long as you have two seperate user accounts on your computer. Hope this helps.
xxmitchxx90

Can I sync two iPads with different users and email addresses on the same computer

Can I sync two IPads with different users and email addresses on the same computer.

yes, just make sure you turn off auto-sync to keep everything organized before you try syncing
on a pc
edit > preferences > devices - 'prevent ipads, iphones, and ipods from syncing automatically' needs to be checked

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

Hi odedn,
Thank you for posting in MSDN forum.
Based on your issue, you mean that you want to copy the test plan with test results from the current team project
to other team project, am I right?
If yes, as far as I know that when we copy test plan with test results to other team proejcts. It is default that
there just will not copy the test plan with test results (pass/fail) to other team project in MTM.
You can refer the following MSDN document’s
what gets cloned, it explained that which objects are copied from the source test plan to the destination test plan.
Reference:
http://msdn.microsoft.com/en-us/library/hh543843.aspx
If you still want to this feature, I suggest you can
submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can I copy newer system (10.6.8.) from previous system folder after archive and install with (10.5.4)?

Rightyho,
had trouble with extensions in 10.6.8 and had to re-install with original disks 10.5.4.
Did an archive and install.
In my (dated) Previous System Folder are Appl / Library / System / User folders.
Copied my User folder back no problem.
Can that also be done with the newer system? No info in support.
Time Machine won't migrate because of newer system and I have only a disk image of Snow Leopard and can't burn double layer DVDs.
When I tried to order SL DVD from Apple they told me it'll take 3 weeks ...

http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Connect to R/3 systems with different XI systems

Hi all,
I have the next scenario:
R/3 system A --> XI system A --> Other systems
R/3 system B --> XI system B --> Other systems
Both systems have different SLD system.
And I need create an IDOC interface between both R/3 systems.
Could somebody help me?
Can I send and IDOC to a XI system with only configure a RFC connection (SM59) or I need configure it in SLD?
Regards, Raú

Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad

Can I copy between systems with different R/3 releases/add-ons?

Similar Messages

Maybe you are looking for