Can I copy meta data from a jpg and past to a tiff. I have CS6 photoshop

How can I copy metadata from a JPg files and paste onto tiffs. I send JPGs to stock agent and when they select I then send Tiffs and want to avoid re typing meta data if possible. Also some pictures have similar meta data information and can I copy that and paste into another picture?
Please give me keystroke information if this is possible as I get confused easily. Use photoshop for dummies language if you can.
thanks a lot Gail

You can copy&paste individual fields, but not the entire data. It's a moot point, anyway. PS will retain metadata e.g. when a file is saved using Save As... to a format that supports metadata and JPG and TIFF both do. also one would simply use Bridge to edit metadata in mass with multiple images selected...#
Mylenium

Similar Messages

How can I copy a slide from one presentation and paste it into another?

Hoe can I copy a slide from one presentation to another?

In the first Keynote, Click the slide in the Navigator panel to select it
Copy the slide; command C or Edit > Copy
Go to the 2nd Keynote, click in the navigator panel and paste; command V or Edit > Paste

How can I copy a row from one sheet and paste it in a column in another sheet?

I would like to copy a row of numbers from one sheet and paste it into a column in another sheet. Is it possible to do this with numbers?

Hi Dennis,
Numbers doesn't have a built-in Paste Special > Transpose the way you have in Excel. However, there are ways to do this in Numbers that are not difficult.
Here are two ways:
Approach 1:
Select the row of numbers, and command-c to copy to the system clipboard.
Click on the canvas and command-v to paste, automatically creating a new table.
With that new table still selected, in your menu choose Table > Transpose Rows and Columns.
Select the cells in the transposed table, command-c to copy, click once in a cell of the destination column of your target table, and command-v to paste.
Approach 2: (after a quick installation, very similar to Excel's built-in Paste Special > Transpose)
Download this Copy Transpose Automator Service, and double-click to install (if necessary choosing Open Anyway in System Preferences > Security and Privacy).
Thereafter to use just:
select the row of numbers you want to copy
with the cells still selected, choose Copy Transpose from the Numbers > Services menu
click once in the destination column and command-v to paste the transposed values.
Note that the second approach does not handle cells with formulas, whereas the first approach will.
SG

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?
For instance: I play my "lucky take" on the virtual piano, and now I am curious how it would sound on let's say a organ. Normally I would select the midi content out of the piano track and copy it into the organ track. I cannot figure out how to do this in GarageBand for iOS. Is there anyone out there with a solution?
Thanks!

It is limited, how you can move regions between tracks. Basically, you can move between tracks with the same touch instrument. See the help: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d
Move a region
Drag the region left or right to move it forward or back in time. Align the left edge of the region with the bar or beat on the ruler where you want it to start playing.
Drag the region up or down to move it to another track with the same Touch Instrument. You can also drag regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be dragged to another Smart Drums track.
If you move a region so that it overlaps another region, the overlapped part of the “covered” region is deleted.
Paste a region
You can paste a region you have copied, or paste an audio file from an app that supports copying audio to the clipboard. GarageBand supports 44.1 kHz sample rate, 16-bit depth uncompressed audio files.
You can paste copied regions to another track with the same Touch Instrument. You can also paste regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be pasted to another Smart Drums track. Audio files copied from another app can be pasted to Audio Recorder or Guitar Amp tracks.
Move the playhead to the point where you want the region to start.
Tap the header of the track where you want to paste the region to select the track.
Tap the track where you want to paste the region, then tap Paste.You can also tap an empty area of Tracks view, then tap Paste. In this case the region is pasted into the currently selected track.

SCM APO can we copy the data from client 001 to client 002???

Hi Guru's
SCM APO can we copy the data from client 001 to client 002???
If it is possibulity please let me know?
Regards,
Sree

Yes you can do.
Tcode SCCL.
Options :
When copying clients, you can select what you want to transfer from the source client to the target client:
User masters: You select this option, for example, if you want to give all users of an existing client the same authorizations in the target client.
Client-specific Customizing: You select this option, for example, if you want to set up a new client in an existing system.
Client-specific Customizing and master/transaction data:
You select this option, for example, if you want to set up a test client that is identical to the production client (in the same system).
Client-specific and cross-client Customizing: You select this option, for example, if you want to set up a quality assurance system based on the production client of another system.
Client-specific and cross-client Customizing and master/transaction data: You select this option, for example, if you want to set up a test client based on the production client of another system.
http://help.sap.com/saphelp_46c/helpdata/EN/69/c24c4e4ba111d189750000e8322d00/frameset.htm

How can I copy a part of the picture and paste this piece on top of another part of the same picture? ta

How can I copy a part of the picture and paste this piece on top of another part of the same picture? ta

select the section you want to copy (marquee tool or lasso tool) and either go to edit copy or use control c create a new layer in layers (top menu bar) or Control shift N and paste using control V; or edit > paste.

How can I copy a number of like fields and paste to reduce form creation time?

How can I copy a number of like fields and paste to reduce form creation time?

Creating Form Fields by Ted Padova

How do I copy a section from a page and paste it into a power point?

How do I copy a section from a page and paste it into a power point?

Use the snapshot tool.

How can you copy form data from an online PDF, in your browser?

Just a quick query, I've recently filled out an online application and I filled this out on an online PDF form. This is the form link:
http://3fivetwo.com/dloads/application_pack_-_admin_long10.pdf
How can I copy the data I typed into this form, to a word document for example? Or is there any way I can save this as a PDF with all the data in the form, to send it as an email?
I've downloaded the form, but it just shows blank pages with no fields filled.
Thanks very much!

download the form to your local disk
open it with Adobe Reader and fill in all the details
save it
send the completed form by email

Can anyone help me write a code about coping data from many files and paste them to one file !?

Hello !
As I said in title , I have alot files (e.g. 60 files) and I want to write a code to copy 5 columns (for examples) of special sheet of files and paste them in one file respectively. For perceive it I explained it more below .
Suppose one of my files is simplified as this : http://s000.tinyupload.com/?file_id=00699705919876414523
The name of this file is 2006Oct and assume my excel files are like "2006Oct, 2006Nov,2006Dec,2007Jan ... 2010Dec". At first I should go to "my files" sheet of 2006Oct file and copy columns " A,B,C,D,E,F " that has "PerturbationNumber=1"
respectively and then paste these to a file that is output file and repeat this process for the other files ( 2006Nov and etc ) and paste data in output file sequentially.
I appreciate and look foreward for any help in this issue.
Majid

Try code below
Sub CombineBooks()
Dim wb As Workbook
Dim sourceSht As Worksheet
Dim destSht As Worksheet
Set destSht = ThisWorkbook.Sheets(1)
destSht.Cells.Clear
FolderName = "C:\temp\test\"
file = Dir(FolderName & "*.xlsx")
firstSht = True
Do While file <> ""
Set wb = Workbooks.Open(Filename:=FolderName & file, ReadOnly:=True)
Set sourceSht = wb.Sheets(1)
With sourceSht
sourceLastRow = .Range("A" & Rows.Count).End(xlUp).Row
If .Cells.AutoFilter Then
.Cells.AutoFilter 'turn off autofilter
End If
.Cells.AutoFilter Field:=6, Criteria1:="1"
If firstSht = True Then
Set copyRange = .Range("A1", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destSht.Range("F1") = "FileName"
firstSht = False
destNewRow = 1
Else
Set copyRange = .Range("A2", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destNewRow = destSht.Range("A" & Rows.Count).End(xlUp).Row + 1
End If
copyRange.Copy Destination:=destSht.Range("A" & destNewRow)
LastRow = destSht.Range("A" & Rows.Count).End(xlUp).Row
If destNewRow = 1 Then
destSht.Range("F2:F" & LastRow) = file
Else
destSht.Range("F" & destNewRow & ":F" & LastRow) = file
End If
End With
wb.Close savechanges:=False
file = Dir()
Loop
End Sub
jdweng

Is it possible to copy all comments from one pdf and paste to another?

Hi Adobe Community
I have a pdf file that has 100+ pages with square markups and arrows. The pdf that was marked up is from last year, but this year the format is the same, but the numbers have changed. Rather than going through every single page and commented as I did last year, is it possible to copy all comments from last years pdf and paste them into this years pdf, in the same place?
Thanks

You can export comments to an FDF file and import the FDF into another PDF. In Acrobat 11, you'd select: Comment > Comment List > [click the little icon in right of panel toolbar] > Export All to Data File

How can I maintain sorted data when I cut and paste?

I work almost exclusively with .csv files that I download from the local multi-list service (I'm a real estate agent). I can sort and chart data on the multi-list website but the interface for Apple users is pretty bad (Citrix client running through a gateway). I was looking forward to being able to download and manipulate data on my iBook as well as be able to present it to clients in a polished and professional manner. As far as I am concerned Numbers seems like a Beta at this point. I have sent in feedback and realize that I will never receive a reply from doing so. I really want to like this program but right now I just want to run my iBook over with my truck. Any help will be much appreciated.
I have three Numbers windows open. One is labeled "Sold" (20 columns, 693 rows+1 header), one is labeled "WE" (20 columns, 679 rows+1 header) and one is an untitled template (20 columns, 1 header). When I sort the data in "Sold" and "WE" to the parameters I need I end up with 18 rows in "Sold" and 22 rows in "WE". My goal is to take the sorted data and paste it into the untitled template.
I select the 18 rows in "Sold" and then select copy (this takes 25.65 seconds BTW!!!). I go to the untitled template and then paste (20.86 seconds). Numbers pastes the entire 693 rows from "Sold" into the untitled template.
I have tried to choose rows. I have tried to choose columns. I have selected individual cells and I have also tried to "select all cells". Each time I get a different result on what gets pasted into the untitled template. I have also tried "paste", "paste and match style" and "paste values" each time getting anything but what I need (the 18 sorted rows).
Does anyone know how to do this?

Hi,
you should probablu describe better your actual situation:
Is the form handler servlet a part of your portal web application?
Seems like yes, if you use getContextPath() :-)
then the form handler servlet should be able access the same session object
through
request.getSession()
If this is not the case, than you could get the session id at the time when
you create the form (in your portlet jsp file) and pass it as request
parameter to the form handler servlet.
That form handler servlet can return it later ...
By the way - the session id is contained in the session cookie, that the
browser sends everytime to the server in the requests. So when it hits the
".../application..." url, the server should automatically recognize to which
session it belongs...
HTH
Ales
"Mukul Sood" <[email protected]> wrote in message
news:3cc9fd74$[email protected]..
>
Hello All,
I am submitting to a form from a portlet.
This formhandler is outside of the portal framework.
Once I am done with form data processing, I need to come back into theportal.
For this, I am sending a redirect request :
response.sendRedirect(
request.getContextPath()
+ "/application?" +"origin=FillMeta.jsp"+"&event=bea.portal.framework.internal.portlet.event"
+"&wfevent=fileuploaded" +"&pageid=home"
+"&portletid=FillMeta"
However, I am not able to pass the sessionid in sendRedirect.
How could I pass the sessionid using sendRedirect?
Would greatly appreciate your inputs or suggestions.
Thanks.
Mukul

When I try copying some content from a webpage and paste it to quickoffice document or in e Mail. all the text copies but, no graphics/pictures. how to get them pasted?

I tried copying some content from various websites (open content from plian HTML pages) and tried to paste it in Quickoffice document as well as in mai application. all the text got pasted properly however the content had some graphics and pictures in it that did not get pasted. So, I want to know if there is any way I can do the copy and paste from website including embedded graphics

You will need to copy and paste the images separately from the text. Or you can try pasting into TextEdit. However, it should work if the editor can handle RTFD files as does TextEdit. You cannot copy images to a plain text document or editor.

Is it possible to copy groups/paths from one layer and paste to other multiple layers?

Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
Thanks in advance.

I actually use the Release to Layer (Sequence) function frequently to build my animated steps, for example when animating some text in a way that Premiere won't handle. This releases all the intermediary objects in a transition to new layers, but the background image still needs to be manually pasted into each newly created layer.
I have read about "Paste to all Artboards," but that feature was not included in CS3. I believe it was released in CS5. Perhaps I need to get an upgrade. Thank you for your kind replies.
I am a Mac-based CAD user going back to the mid-1990s, and it's interesting how many of the helpful, time-saving features we took for granted in those drawing programs are either not included in Illustrator products or are just being added in recent releases. I would still be using programs such as PowerDraw/PowerCADD if they hadn't gone out of business. Even with some of the expansion packs I've used, Illustrator doesn't hold a candle to PowerCADD.

HT201317 How do I copy a photo from an email and paste it in my photo stream?

How do I copy a photo fromm an email to my photostream?

In an Event select the photo and click on the Share button at the bottom of the iPhoto window;
In the window that appears select the Photo Stream you want to add the photo to:
OT

Can I copy meta data from a jpg and past to a tiff. I have CS6 photoshop

Similar Messages

Maybe you are looking for