Can I correct for an image that is distorted: should be square, is not?

I'm working with some photos of flat art work. The camera was not aligned perfectly, so the images are not quite square. Can I use Photoshop to correct for this?

Hello!
There are many solutions to your problem. I have posted a few possible solutions in changing an image that is distorted.
If you cannot find a solution, I would recomend posting your image in a response so we can all see the image and offer some specialized advice.
Janelle

Similar Messages

  • Can I search for multiple images simultaneously in Aperture?

    Can I search for multiple images simultaneously in Aperture?  For example, search for 'Image2.jpg, Image3.jpg, Image5.jpg' by image name, out of different folders? 

    dusan -- your best procedure is likely to be to type the first file name (without extension) in the search field of the Photos View, and then mark that file either with a Flag or a color label.  (You might clear all Flags prior.)  If you have a lot of images or a slow computer (or both ) you may have to wait a few seconds.  Aperture will show "Loading ... " on the left side of the tool strip while it churns through your images.
    Then hit backspace twice, and type "60".  Mark the file found.
    Repeat with variations.
    Then go to Flagged view, or filter the whole Photos view for the color-label you used.

  • How can I have a browser image that scrolls with images on top of it scrolling in tandem -

    How can I have a browser image that scrolls with images on top of it scrolling in tandem - so the background is a hexagon pattern with small images inside some hexagons and I want them all to be scrollable as a user uses the browser scroll bars. At the moment the background image jumps when I preview so the small hexagons all become out of alignment. Any tips appreciated. I have browser image set to tile - pinned at the middle and set to scrolling - the small images are not pinned -

    Thanks for your answer - The images on the top layer are also links and change to show they're links on rollover - so I wanted to keep them as separate graphics - and it works to a point but when I preview the page in a browser the tiled browser image always moves no matter how I pin it and then everything becomes unaligned. Any further suggestions appreciated.

  • Is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?

    Hi there.
    i have set my links to be black in my page properties.  i have somes images that i am using for links and i do not want the to have a black box tracing their outline.  it's messing up my design and tables.  is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?
    see attachment.
    thanks for sharing your knowledge with me.
    gina

    If you would like your NON-linked images to have a border, and only remove the border from linked images then this css:
    a img { border:none; }
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Can't copy and paste images that i've converted from pdf to word

    can't copy and paste images that i've converted from pdf to word

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • HT4623 what can be done for the ipad that is making people dizzy and having headaches?

    what can be done for the ipad that is making people dizzy and having headaches?

    Go to settings>general>accessibility>reduce motion> turn on.

  • TS1363 What can I do for an Ipod that won't update, won't allow you to eject it, and can't reset either?

    What can I do for an Ipod that won't update, won't allow you to eject it, and can't reset either? I can simply unplug it from my pc and after a while it runs down and works fine after a charge. Wanting to clear data and sell but nothing seems to work. The ipod was originally set up on a different computer and with a different I tunes account as well. Would that make any difference?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    Next
    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

    which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

    As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
    One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
    regards

  • How can I publish a project so that the link to embedded flv is not lost?

    When publishing an Adobe Captivate 3 project, the embedded flv file does not play.
    How can I publish a project so that the link to embedded flv is not lost?

    I am not really sure, if I understand you right. But try this:
    Don’t place a picture, but draw a box and use the "Fill" command to put a picture into it.
    (Don’t click onto the color swatch, but onto the blue link "Fill".)
    In this case responsivness should work.

  • How can I retrieve a mail message that was accidentally deleted.  It's not in the trashcan.

    How can I retrieve a mail message that was accidentally deleted.  It's not in the trashcan. 

    Which trashcan, mail or osx

  • I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    Do you experience the same issue on other WiFi networks?
    Do any other iOS devices experience the same issue on your network?
    Make sure you follow all steps provided in the article below:
    iOS: Troubleshooting Wi-Fi networks and connections

  • How can I correct for 2 different color temperatures in one image?

    Hi,
    In indoor architectural photography one may encounter mixed color temperatures in one image. If one could use gels and lamps to replace incoming natural daylight and force a uniform color temperature (for instance tungsten) then the problem would go away. Yet, sometimes this is not possible or practical and I was exploring what could be accomplished within Photoshop. Here is my proposal ( or beginning of it):
    shoot RAW
    generate 2 versions of the image, each corrected for one of the color temperatures present (say WB dropper in "should be neutral" area where daylight dominates and another WB dropper in "should be neutral" area where tungsten dominates)
    open them in Photoshop and move one of them as a layer on top of the other version
    Try to blend the two layers
    in one example, I used Hue blending mode and the photo fixed itself!! However this is not generalizable to other images
    I also tried BlendIf for harder images but with no success
    I presume selection is then a must which brings up the question:HOW CAN I SELECT DEPENDING ON COLOR TEMPERATURE? I mean, the layer where WB = daylight looks orange-casted in the areas where the main light source is tungsten, while the layer where WB = tungsten looks blue-casted in the areas lit mainly by sunlight. I must believe there should exist a best approach to select say the blue-casted areas or the orange-casted areas, and that approach should be simple if it somehow takes into consideration the predominant cast. I have tried Select Color Range but not very successfully. I just feel there must be a simpler way, taking advantage of the present casts.
    Masks seem also useful
    All feedback will be greatly appreciated!
    Thanks,
    Juan

    If you want to use multiple keepalives for a service, you must use a script. The alternative would be to create 2 content rules, and 2 sets of services, one for port 80 (or whatever) and one for port 443 (or whatever), and use http for one and ssl for the other.
    Michael Voight
    CSE

  • How can I create a DVD image that PC users can retrieve and burn...

    I need to create a DVD disc image that PC users can retrieve from a private network share and burn to a blank DVD. Once burned, it needs to auto-start at the Menu. The master works fine. Images burned using the Mac Disk Utility work fine. But I have little control over who will download the image or the method by which they will burn it, so I need to provide visitors with guidance. Thank you in advance for any assistance you can provide.

    Thank Jeff for this one.....
    http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0023-convert_dmg_imgiso.html
    I've also heard that you can just copy an ".img" iDVD image to a pc, change the extension to .iso and then burn with Nero, etc. But I haven't tried it myself.....
    John B.

  • How can I insert a single image that resizes to full screen when I pinch it out?

    Hey there. I'm looking for a feature (similar to the gallery widget) where I can have 1 small image and when you tap or spread your fingers, it resizes to full screen. Is this possible?

    Thanks, Caleb, that worked!
    But I have a follow up question. So if I use Edit Mask so that I can only see a portion of the image, when I tap the image, I only enlarge the visible portion. In fact, it isn't even enlarged: I only see the same portion of the image at the same size. This is not the behaviour you get with the gallery widget. Is that also your experience, or am I missing something?
    In thinking about it, I can probably make do with the gallery widget in the cases where I would like this behaviour, but it seems like this should work.

  • How can i search for a color that is not in the color palette? (CS 5.5)

    I have a client, that has used a certain color in a series of textfields throughout the document.
    The color consists of all 4 CMYK colors and needs to be just Keycolor. However the color is not in the swatches menu, so marking it there and changing it won't work. I have downloaded a script that might have worked, but it could only find colors that were in the swatches palette. (Find / Change by Color / Overprint" version 1.2).
    Ofcourse, creating a similar color and adding it to the swatches doesn't work.
    Is there anyway that i can search for the color or does it really have to be done manually.
    Best regards

    You can only search for real, actually existing swatches. No sweat: use "Add Unnamed Colors" in the Swatch panel dropdown menu to get a list of all of the manually applied colors.
    Since you want to change all of them to the same color, you don't even have to use Search/Replace. Simply delete the new colors and select the one you need in the "Replace With" dialog that appears.

Maybe you are looking for