Can i correct my mistakes in form which was in PDF Format when i was filling it up?

I have a Form in PDF format I have done some mistakes when I fill-up it.
Now the new forms are not available on Net & also in Shops.
So can I Correct the Form where I Did Mistakes?

If you still have the form and did not flatten it, then you should be able to make changes. Easiest test is to copy the form and try it on the copy. If it works you have your answer.

Similar Messages

I can no longer get to my website which was hosted by mobile me

my iweb created website was previously hosted through mobile me, now I can't seem to get to it?
I can no longer get to my website which was hosted by mobile me

That is because MobileMe was discontinued at midnight June 30 as advertised
See this article for more information
LN

Does anybody know how I can get my Mac Book Pro back, which was stolen during a presentation I was attending. I have the store receipt, however I had not installed i Cloud in my mac Book?

Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
Thanks for helping me!

Sorry to say but you are out of luck.
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0
           9. Prey 0.6.2

I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/

By converting the WMA files to AAC formatted files.

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again!

Displaying a spool which is in PDF format in SAP

Hi Friends,
We have a requirement where we need to display a W2 form for employee in PDF format. Through SP01, I can see the pdf file. How can I programatically display this W2 using ABAP program.
I have tried various function modules related to spools, but most of them didn't work as the spool was in ADSF format.
Your inputs or suggestions are awaited.

Hello,
DATA:
    V_LRQCLIENT      TYPE TSP01-RQCLIENT,
    V_LRQO1NAME      TYPE TSP01-RQO1NAME,
    V_LCLIENT        TYPE RSTSTYPE-CLIENT,
    V_LNAME          TYPE RSTSTYPE-NAME.
Begin of addition SCR FIE759-ECC6.0 D11K924073 04/13/2010.
data rq       type tsp01.
data bin_size type i.
data dummy    type table of rspoattr.
End of addition SCR FIE759-ECC6.0 D11K924073 04/13/2010.
DATA:
    C_LSP01          TYPE RSTSTYPE-AUTHCHECKD    VALUE 'SP01'.
Begin of Insertion for D11K915826
DATA:
    V_LPAGENUM       TYPE TSP01-RQAPPRULE.
End   of Insertion for D11K915826
Retrieve spool details.
Access using full primary key, RQIDENT.
Begin of Change for D11K915826
SELECT SINGLE RQCLIENT RQO1NAME RQAPPRULE
    INTO (V_LRQCLIENT, V_LRQO1NAME, V_LPAGENUM)
End   of Change for D11K915826
    FROM TSP01
   WHERE RQIDENT = P_SPOOL.
Return code check is not needed, always successful.
Begin of Insertion for D11K915826
IF V_LPAGENUM > 99 AND SY-BATCH IS INITIAL.
    MESSAGE S000(ZPES) DISPLAY LIKE C_E WITH TEXT-015 TEXT-016.
ELSE.
End   of Insertion for D11K915826
V_LNAME     = V_LRQO1NAME.
V_LCLIENT   = V_LRQCLIENT.
Call function module to retrieve spool attributes.
call function 'RSPO_GET_ATTRIBUTES_SPOOLJOB'
    exporting
      rqident     = p_spool "Spool no
    importing
      rq          = rq
    tables
      attributes = dummy
    exceptions
      no_such_job = 1
      others      = 2.
if sy-subrc <> 0.
    message e126(po) with P_SPOOL.
endif.
IF V_OBJTYPE+0(3) = C_OTF.
--- convert spool request into PDF, dependent on document type ---
if rq-rqdoctype = 'OTF' or rq-rqdoctype = 'SMART'.
Convert spool to PDF.
    CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
      EXPORTING
        SRC_SPOOLID                    = P_SPOOL
Begin of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
        NO_DIALOG                     = SPACE
       IMPORTING
         pdf_bytecount                 = bin_size
         bin_file                      = pdf_xstring
End of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
      TABLES
        PDF                            = I_PDF
      EXCEPTIONS
        ERR_NO_OTF_SPOOLJOB            = 1
        ERR_NO_SPOOLJOB                = 2
        ERR_NO_PERMISSION              = 3
        ERR_CONV_NOT_POSSIBLE          = 4
        ERR_BAD_DSTDEVICE              = 5
        USER_CANCELLED                 = 6
        ERR_SPOOLERROR                 = 7
        ERR_TEMSEERROR                 = 8
        ERR_BTCJOB_OPEN_FAILED         = 9
        ERR_BTCJOB_SUBMIT_FAILED       = 10
        ERR_BTCJOB_CLOSE_FAILED        = 11
        OTHERS                         = 12.
    IF SY-SUBRC <> 0.
Begin of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     message e712(po) with sy-subrc 'CONVERT_OTFSPOOLJOB_2_PDF'.
End of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
    ENDIF.
Begin of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
ELSE.
elseif rq-rqdoctype = 'LIST'.
Convert Spool to PDF.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        SRC_SPOOLID              = P_SPOOL
Begin of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
        NO_DIALOG               = SPACE
       IMPORTING
         pdf_bytecount            = bin_size
         bin_file                 = pdf_xstring
End of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
      TABLES
        PDF                      = I_PDF
      EXCEPTIONS
        ERR_NO_ABAP_SPOOLJOB     = 1
        ERR_NO_SPOOLJOB          = 2
        ERR_NO_PERMISSION        = 3
        ERR_CONV_NOT_POSSIBLE    = 4
        ERR_BAD_DESTDEVICE       = 5
        USER_CANCELLED           = 6
        ERR_SPOOLERROR           = 7
        ERR_TEMSEERROR           = 8
        ERR_BTCJOB_OPEN_FAILED   = 9
        ERR_BTCJOB_SUBMIT_FAILED = 10
        ERR_BTCJOB_CLOSE_FAILED = 11
        OTHERS                   = 12.
    IF SY-SUBRC <> 0.
Begin of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     message e712(po) with sy-subrc 'CONVERT_ABAPSPOOLJOB_2_PDF'.
End of change SCR FIE759-ECC6.0 D11K924073 04/13/2010.
    ENDIF.
Begin of addition SCR FIE759-ECC6.0 D11K924073 04/13/2010.
ELSE.
     message e789(po) with rq-rqdoctype.
ENDIF.
pdf_size = bin_size.
End of addition SCR FIE759-ECC6.0 D11K924073 04/13/2010.
IF I_PDF[] IS NOT INITIAL.
Transfer pdf document to Unix.
    Use FM GUI_DOWNLOAD to download the pdf data to presentation server.
Thanks.
ramya.

Can I get support for an iPhone which was bought in US in Italy?

I have an iPhone 4s which was bought from US little while ago (so it has international warranty now),I started using it just three days ago but it seems it has a huge problem, it doesnt open even with restarting method, nothing appears on the screen so can i get support for this phone in italy and can apple help me on this problem?

Probably not, unless India is one of the very few places that don't use GSM.

Smart form print preview in PDF format

Hi ABAP Experts,
I have 2 requirements
1) I want to print preview of a smartform in pdf format
2) I also want to attach a local pdf file to the smartform which is displaying in the pdf print preview format
or to rephrase:
I want a pdf attached to a smartform which i want to open in the pdf print preview format.
Regards,
Niloufer

Use following function modules:
Please see the below code to download a PDF file on to your computer.
PERFORM F_CONVERT_OTF.
FORM F_CONVERT_OTF .
PERFORM F_CALL_SMARTFORM. " Call the smartform to get data in I_OTF_FINAL
**appending the otf data into the final table & save the pdf file.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      FORMAT                = C_PDF_U      "Value is 'PDF'
    IMPORTING
      BIN_FILESIZE          = L_BIN_FILESIZE         "L_BIN_FILESIZE TYPE I,
    TABLES
      OTF                   = I_OTF_FINAL
      LINES                 = I_PDF_TAB    "It is of type TLINE
    EXCEPTIONS
      ERR_MAX_LINEWIDTH     = 1
      ERR_FORMAT            = 2
      ERR_CONV_NOT_POSSIBLE = 3
      ERR_BAD_OTF           = 4
      OTHERS                = 5.
* Check if the file is already existing.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
    EXPORTING
      FNAME                = L_FILE1   " Path where file is saved
   IMPORTING
     EXIST                = L_RESULT
*   ISDIR                =
*   FILESIZE             =
   EXCEPTIONS
     FILEINFO_ERROR       = 1
     OTHERS               = 2
PERFORM F_GUI_DOWNLOAD USING L_FILE.
ENDFORM.
FORM F_GUI_DOWNLOAD USING P_FILE TYPE STRING.
CONSTANTS: C_BIN(10)       TYPE C VALUE 'BIN'.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      FILENAME                = P_FILE     "same as L_FILE
      FILETYPE                = C_BIN
      CONFIRM_OVERWRITE       = C_X   "value 'X'
    TABLES
      DATA_TAB                = I_PDF_TAB
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      OTHERS                  = 22.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<removed by moderator>
Edited by: vishalmurgai58 on Mar 6, 2012 1:43 PM
Edited by: Thomas Zloch on Mar 6, 2012 - please do not ask for ...

Shipping legacy MSDS uploaded which are in pdf format

Hi Friends,
Do not get mislead by Questiom Here is the requirement.
In our project, We have imported legacy MSDS in PDF format. For this we created a program to upload legacy MSDS in PDF format.
The generation variants are of type "MSDS" and not "IBD_MSDS" type.
So all imported PDF MSDS are visible in CG54 as released MSDS. So here is the requirement.
Immediately after go-live there will be no MSDS generated in SAP EHS system by WWI server.
So if I want to ship the MSDS which is stored in PDF format, how to achive this.
Standard scenarion of shippping is working. but this issue we need to resolve. Kindly help if I need to do any configuration or Developement.
Note:- I am getting error as "File not found".
Thanks.
WIth Warm Regards
Mangesh Pande

Dear Mangesh
in regards of:
I am able to ship reports which are generated through WWI with generation variant of report category "MSDS".
Congratulation. One process is up and running. Now you need to "establish simply" a "similar" customizing in context of "IBD_MSDS". This is not easy. I know. BUt it is possible. But first, as I have tried to explain, you need to have a super perfect very good blueprint. (considering your current and future situation in which you may be would like to dispatch normal WWI reports)
It is nearly not possible to explain to you the "millions" of pitfalls in your situation (but you can prepare such a set up as your situation is quite common, normal and "standard"; especsially if you have the need to migrate data (but other options exists as well to do the job)). In most cases (according to my experience in your situation) you will need at least a project running for 6 months to establish a robust process to support both document types in the "same" disptach process.
PDF format is a quite normal format for such "business scenarios" you have. The issues is youre "wording":
"After go-live for some days there would not be generation of MSDS in CG54 as new versions of MSDS would not be generated in CG54." => this leads to the "interpretation" that at later point in time normal WWI reports might be used and this is the "trick" (if you really have a very very good picture about how SAP has designed the SDS dispatch process). => coming to the main point: you will use a lot of SAP EHS standard customizing but you must develop of lots of customer specific function moduls to get a solution
C.B.

Can we save and view reports generated by OBIEE in PDF format?

Hi,
Can we save and view reports generated by OBIEE in pdf?
Thank you,
Regards,
Gowtham Sen.

Hi Gowtham,
Put your request on a dashboard and you will see a print to button on th bottom left corner. Now you can save to pdf.
Good Luck,
Daan Bakboord

Can I do correction Design of a file which was made by Dw CS6(html file) on Muse?

I am still Adobe Muse biginner.
Can re-design the html.file (Creative cloud's providing Dreamweaver CS6 made, exported file) on Adobe Muse?
How to import it into Muse the file?
I tried these 3 cases experimentally:
1) FILE - Open site - gray and non active
2) Insert HTML - unclear
3) Copy and paste from opened the html data from word - uniform regulations of the html file of Dreamwever will be changed and changed on Muse's new document
The html file which I want to re-design, it is constructed by quiet simple composition by txt and JPG images, just one site(page), I expect that the material makes be operate like a iWeb (Apple) or Dreamweaver.
I don't want to destroy glossy design made by Dw, keep almost design, just I would like to insert image, and want to export html file again.
Is it possible? If it were possible to do it, how do I devise it? Do you know if the procedure was written on Adobe's pages on online, or not? Please tell me the possibilities.
I want to ask the posibility whether half constructed site can re-make on Muse.

The downloads folder in the history manager? I'm not sure what you mean.
When I click on History, I see what I've put in the screenshot. Then it starts telling me where I've been today. Nothing about downloads, per se. I've been getting at those through Tools/Downloads.
I have FireFox set up to ask me where downloads should go, rather than automatically sending them to my Downloads folder in Windows, and even if it had automatically saved to Downloads, it wouldn't still be there now.
In a pinch, I suppose I could skip the first few in the downloads list, and then start right-clicking on individual downloads and selecting Go To Download Page, but I was hoping there might be some way to narrow it down, by getting at the date on downloads. That's fairly easy in History, but I don't see any way to do it in Tools/Downloads.

I hit iPhoto send and I get: The email server didn't recognize your username/password combination. -- then can't get back to re-enter, which was correct one in first place.

I have filled out an iPhoto "postcard" format with a message and photo, etc., and when I hit send, I get the message "The email server didn’t recognize your username/password combination." I hit OK but it does not clear to refill the log-in -- and I believe the info was correct to start. I'd like to save (and not have to re-crete) the card, but see no way of doing so, thus am fearful of closing it (for good).

in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

How can others open more than one form? [Was: Sandra]

How do you use Forms Central? I am the only account that can open more than one form. I have added all the people in contacts. When they login, they have the upgrade option for more than one form. We have an order number and end user id. Thanks for the help.

Hi,
It sounds like you have a paid account and the other users have free accounts.
You will have to share the form with the other users, please see this link for more detailed on how to share a form with others:
http://forums.adobe.com/docs/DOC-3351
All the free account users should be able to open all the forms that you have shared with them. Free users can only create one form on their own.
Hope this helps,
Thanks
Lucia

Can I track my macbook pro retina which was stolen?

I Just lose my laptop and it was stolen, is there any way I can track it?

Did you ever enable Find My Mac? If not, your only recourse is to report your stolen computer to the police and notify your homeowners insurance company. If purchased with a credit card, you may have theft coverage through them. Call them and ask.
Reporting a lost or stolen Mac Product

Can my parent Flash detect a window which was open from inside has been closed?

Hello everyone,
I have a Flash animation which at one point opens a New
Windows and plays an external FLV file. I would like to be able to
continue with the animation once the new movie window is closed.
So, I would like to know if there is a way for flash to
detect when the user has left the New Window or closed the window?
Khoramdin

Hi,
If you accidentally closed the tabs there is one way to recover the website or pages you visit. Just hold CTRL+H on your keyboard and look for its date and find the website you visited.
CTRL+H is a keyboard hot key to access the history pane.
I hope this helps.
Thank you!

Can i correct my mistakes in form which was in PDF Format when i was filling it up?

Similar Messages

Maybe you are looking for