Can i create 2 input tracks for 2 separate mics?

can i create 2 input tracks for 2 separate mics?

wospoon wrote:
can i create 2 input tracks for 2 separate mics?
yes, create an aggregate device:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
and then assign 1 channel to one track, and the 2nd channel to another track in the Track "i"nfo pane

Similar Messages

Can I create & publish site for another .Mac user?

My wife is a .Mac member and I piggybacked a .Mac e-mail address through her account. Now I'm trying to help my father, a recent Mac convert and .Mac member, by creating a website for him with my version of iWeb 08. When I open iWeb on my computer (first time as I've always used Dreamweaver to create websites), I'm locked out of pretty much everything (I'm assuming because I'm not a full .Mac member which it's somehow linking to). If I have my father's .Mac info, can I create a site for him and upload it for him on my computer, and if so, how would I do this?
Thanks in advance for any help!
~Chris

All you need to do to post to his .Mac account is find out what his .Mac username and password are and input them into the .Mac pane of System Preferences. That will give iWeb access to his .Mac space. If you end up getting your own .Mac at a later time, you will have to change that info in System Prefs.
I created a separate user on my computer for a 2nd website that I publish for my church. That way I keep all the iWeb and .Mac account info separate without having to jump through any hoops - I just have to switch users.

IRig input level for vocal mic extremely low

Hi All,
I have ben merrily using my iRig and Garageband for Ipad to record instrumental tracks with no problem, but recently decided to try and add vocals. Just to test it out I bought an imitation SM58 style dynamic mic, with an XLR to jack lead so I could use the iRig, however when I go to use it, the audio/input level for the mic is VERY low - any ideas as to why this might be? I've turned the track volume and input up to maximum but it's still barely audible. Suspect it might be the mic, so tempted to spend some real money on a condenser mic, but worried I will get the same result. Are there any alternatives / success stories with recording vocals through Garageband, and what are you using?
Thanks
Nick

I have used the Shure SM58 and many microphones similar to it in studio and live settings, and that microphone requires what is called Phantom Power when it is run through a mixing board. In a nutshell, Phantom Power runs 48 volts on the channel the microphone is in, because that microphone only sends a passive signal and it needs to be powered. So the reason your microphone would put out such a low level would probably be because there's not a substantial for your iRig to pick up, even at maximum gain. I would look into purchasing a phantom power unit or some other preamp that you can put between your iRig and microphone.

I have multiple devices (imacs, lap tops and ipads) all connected to a NAS server. Can I create a user for myself and one for my wife, and each have our own apple ID, and Itunes accounts, but all share the same media on NAS drives?

I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?

You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

Can we create secondary index for a cluster table

hi
can we create secondary index for a cluster table

Jyothsna,
There seems to be some kind of misunderstanding here. You <i>cannot</i> create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).
Hope this clarifies things,
Mark

How can mass create batch classification for many material batches? ?

Hi Experts,
In our system , there are so many material batches which have not been classified，see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!

Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can i create a Trash for external USB Drives ?

Hello,
how can i create a Trash for external USB Drives or my TimeCapsule ?
Thanks.

You do not need to create trash cans for individual drives. The trash can on the desktop holds deleted files from all mounted drives.
TimeCapsule manages its own space. If it fills up it will delete older backps to make space for newer ones.

How can I create a form for users wherein the text field will expand to accommodate additional text?

How can I create a form for users wherein the text field will expand to accommodate additional text?

You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Can v create graphical display for the report

Hi to everyone
my q is this can v create trend lines for a report ........
if the ans is yes then pl mention the way of doing it .......

when you run a bex report on the left top you have a button "graph". If you click this, you get a basic chart representing your output table. when you right-click on the chart you get the option menu as you get in xls, meaning you can change the type of chart (line, bar, pie,...) the series, the titles and so on (like regular xls)
so the answer to your question is yes. If you want even more features you can use workbooks.
M.

Can i Create Output Variable for DB Polling in BPEL 11g?

Hi Team,
I want to create the Output Variable for DB Polling,But when i double click on Reply Activity-->Create New Variable it is giving error message like "Can't Create output variable.The Selected operation doesn't have an Output Message".
My Question is Can we create Output Variable for DB Polling, if Yes tell me the procedure to create the Output variable ?
Regards,
Kiran

Hi Kiran,
In these scenario generally runtime faults occurs so you can use the CatchAll activity and rethrow activity to complete the instance in error state. Also before the completion of the process if exception occurs you can rollback all the transaction.
or
you can use the Fault handling framework:
Using Fault Handling in a BPEL Process - 11g Release 1 (11.1.1.7)
Regards,
Anshul

Can I create folders (albums) for my photos and move them?

Can I create folders (albums), for my photos and then relocate said photos to specific folders?

These links may be helpful.
How To Create Photo Albums http://tinyurl.com/cxm4eoq
How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
http://tinyurl.com/7qep7fs
 Cheers, Tom

Can we create serach help for a selection screen field

Can we create serach help for a selection screen field with out creating searchhelp object.
I mean is it possible to create serchelp in the program itself with some specific values i want to give.
E.g say we can define any internal table and fill it with values and using that into selection screen fields
Regards
Mave

AT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
PERFORM PAYMENT_HELP.
FORM PAYMENT_HELP.
DATA: begin of DESCR_TAB occurs 0,
        DESCR LIKE BKPF-BKTXT,
        END OF DESCR_TAB.
DATA: gd_repid like sy-repid.
gd_repid = sy-repid.
DESCR_TAB-DESCR = 'aaaaa'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'bbbbb'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'ccccc'.
append DESCR_TAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'DESCR'
            DYNPPROG    = gd_repid
            DYNPNR      = '1000'
            DYNPROFIELD = 'paymeth'
            VALUE_ORG   = 'S'
            DISPLAY     = ' '
       TABLES
            value_tab   = DESCR_TAB.
endform.
Svetlin

Can we create an index for a list of itmes in a single object?

Can we create an index for multiple values in a single object. We have an object Order that contains list of items. I like to get all orders for a specific item. I want to create an index to speed up the query. Is it possible? What are the other alternatives?
My Order object is as follows:
Orders
Item List
Shipping Address
Example:
Order 1
i1, i2, i3, i4
123 some way, city, 12345
Order 2
i2, i3
333 some other way, city2, 33333
order 3
i2, i4, i7
My search would be, give me all orders that has item i2. It should return Order 1, Order 2 and Order 3.
Thanks

Hi,
I think that this will work ...
ValueExtractor extractor= new ReflectionExtractor("getItemList");
cache.addIndex(extractor, true, null);
Set setKeys = cache.keySet(new EqualsFilter(extractor, i2));
In this case, the Collection value extracted by the ValueExtractor is treated as a Collection of contained attributes when the index is created.

Can i create 2 input tracks for 2 separate mics?

Similar Messages

Maybe you are looking for