Can I Create a 2 NTFS Partitions on my iMac

I have an iMac, running Leopard, a 320GB Hard Drive and I want to install Win XP Pro.
My ultimate objective is to have my Windows OS and programs on a seperate dirve (formatted NTFS) and then have a second NTFS partition for my Windows related Data Files, labeled as my second drive (Also formatted NTFS)
I tried so many times in a differant ways using Boot Camp but it didnt work at all. Could any one please assist me, its been more than 2 month since i purchased my iMac and till now i couldnt move my work from my current PC.
Please if any one could help i would be highly appriciated.
Message was edited by: BlackSword

You can do what you said, but I don't think what you want.
You can only have two partitions on your internal drive, one for OS X and 2nd for Windows.
You could have a 2nd external drive as your data drive.
If you want 3 partitions on your internal drive, you'll have to use Disk Utility and not BootCamp Assistant; or you'll need to look into how to setup a triple boot system.
You can make a large NTFS partition for Windows, and then take a slice out of that for data, trouble being that some things won't work properly.
If you are wanting to read and write to NTFS from OS X, then Paragaon has a NTFS drive version 6.5. And if you want to read/write HFS+ from Windows, then MacDrive7 can accomplish that.
You can't install and boot Windows from USB drives.
What you want to do is easy, with a system with multiple internal hard drives.

Similar Messages

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb again?

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb from the App Store again? My problem is my 4Gb/month allowance on a 12 month contract. I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

HI tasclix, it depends what you mean by an OS X boot drive.
If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X Mavericks.app"; see this article:
http://support.apple.com/kb/HT5856
Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
Message was edited by: SilverSkyRat

How can i create a /home zfs partition

I need to create a zfs home partition without been part of the aumounter.
ldap home users configuracions needs to be in /home
disableing the automounter works.. however
automounter its needed to mount other file systems.

Edit the /etc/auto_master file and remove or comment out the /home entry. Then restart the autofs service. This should take /home out of the automounter. You can then use zfs create to create the local /home ZFS filesystem as you need it. For example, if you want /home on the "rpool" zfs pool, you could use "zfs create -o mountpoint=/home rpool/home" and then create your home directories inside that.

Can I create unpartitioned index on partitioned table??

Hi,
I am not clear about the concepts of partitioned and non partitioned index.I was under impression that If we create a index on partitioned table it will be automatically becomes a partitioned index.But I cheked in my DB there are many unpartitioned indexes on large partitioned tables.
Which one of these is efficient? wht is the concept of local and global related to these partitioned and unparitioned.I am bit confused.pls help me.
Thanks

There's nothing prevent you from creating a nonpartitioned index on partitioned table. The official name for it is Global Nonpartitioned Indexes
Global Nonpartitioned Indexes
Global nonpartitioned indexes behave just like a nonpartitioned index. They are commonly used in OLTP environments and offer efficient access to any individual record.
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14220/partconc.htm#i461446

Can I create a windows 7 partition on a 1TB thunderbolt drive to use with my Macbook Pro?

I have a new Retina Display Macbook Pro with a 250gb SSD Drive that is quickly running out of space. My work recently gave me a new project to do some programming that can only be done in a Windows environment. With the price of Thunderbolt drives coming down I was wondering if I could build and boot to a Windows 7 partition on the Thunderbolt Drive and use that when I need to run Windows applications. Also what would the speeds be like? Would I be able to run apps like Photoshop and Illustrator? Also if that works would I be capable of creating a partition for my kids to install their games on?

Redgoat,
(1) USB 3.0/2.0 Drive will boot a windows 7 installation, (hold down option when you boot)
* I am not yet awake if thunderbolt drives will be detected by the macbook pro for booting purposes. I cannot see why not
(2) if you are concerned about speeds you can purchase a SSD USB 3.0 drive but a standard hard drive is quite reasonable with a USB 3.0 connection
and lastly MacBook Pro Retina are mean gaming notebooks and bootcamp is the best way to do windows gaming on it.

Can you create a boot Camp partition on a Fusion Disk?

Can I install a BootCamp partition on a fusion disc?
Can I install a BootCamp partition (Wndows 7) on a 1 TB on which OSX mac Yosemite or Mavericks has been installed first? I have a 2012 MacBook Pro, that already has a 400 GB Boot Camp partition, but I am considering replacing it with a fusion disc or an SSD since I shall have to install a windows compatible medical dictation application that could use a speedier disc. Will Mac OS and Windows interfere with each other on the SSDpart of a large fusion disc ( 1 TB) if I switch back and forth from rebooting on Mac OS , then on Windows and vice-versa? Does the SSD part of the fusion disc get confused, and will the fusion disc tolerate the installation pf a Boot Camp partition in the first place, or just give a stretch of plain 5400 RPM disc without the SSD part ?Can I

1. On single-disk Macs, you can use an SSHD (as a single physical disk), but not an SSD/HDD. There is a no single physical unit which is a Fusion drive. A Fusion drive consists of a physical SSD and a physical HDD. MBPs on which the Optibay has an SSD/HDD and main bay with SSD/HDD will support a Fusion (aka CoreStorage volume). Yosemite supports a Fusion drive, which has an internal SSD and and external HDD (the reverse makes no sense, but is possible).
2. On newer Macs, with 1TB PCIe flash, you have an SSD as your whole drive.
3. The two environments, OS X and Windows are self-contained, on separate partitions. The underlying hardware is common.
4. On a Mini, which supports two drives, I have a 256g SSD/1TB HDD, in a DIY Fusion drive, with Windows on the SSD part. Bootcamp Assistant does not support this, but third-party tools can be used. The other option is to install OS X and Windows on a SSD, and later add an HDD and include into a CS volume. This is what I would recommend for you.
5. The 13-in 2012 MBP will allow you use a USB installer, without the need for an Optical drive, so it is possible to replace the Optibay with an HDD, create a Fusion drive. If BCA is used, it will put Windows on the HDD on this specific machine if the Fusion drive is created first.

Can't install Windows 7 (NTFS partition)

New MacBook Pro (bought in August with version 10.5.8), just updated to Snow Leopard. Boot Camp is v. 3.
Created a 100GB partition for Windows using Bootcamp, clicked install and inserted the Windows 7 64-bit disk. Did this twice - same error "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS."
I was never asked - I thought any partition >32GB was by default NTFS?

I have the same problem. I have "Disk 0 Partition 3: BOOTCAMP" highlighted. There is no option to "format." I just see an error message. "Windows cannot be installed to Disk 0 Partition 3." I click for details, and it says, "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS."
I've seen screenshots of the install screen with the format button, so I know what it's supposed to look like. I'm not missing it.
EDIT: NEVER MIND, I'm a dum-dum. I didn't click disk options or whatever to get to the screen with the format options.
Message was edited by: invisiblebike

I can't create or resize any partition on my HDD. Mac os Lion

If I try, i get a strange error: Partition failed with error:
Necessary support for resizing file systems, such as HFS + with Journaling enabled. (translated with google)
What can I do?

keg55 wrote:
These issues are sometimes fixed by booting from an external Recovery HD not the one on your Lion volume. Why? Because the Lion volume and Recovery HD reside on the same internal drive whereas the external is not touching it.
Note that the Recovery HD is a virtual volume of the original Lion volume. That is, the Lion volume contains the Recovery HD at the bottom of itself. For a disk with multiple volumes, each which has a bootable OS on it can contain a Recovery HD subvolume.

Can I create a copy of Pages '09 on iMac to use a installable file on MacBook?

So, I don't like the new versions of Pages, Numbers and Keynote and have been using the '09 version. I have been right clicking and opening files with the '09 version. I tried setting '09 as default but that would not stick, default would slip back to '13. So I had the idea of deleting the '13 version from applications so the default would revert to '09. This worked for Numbers and Keynote but not with Pages. When I tried to open Pages ('09 version, '13 is now deleted) it just hangs. So I sent Pages '09 to trash as well and reinstall Pages from the App store. After install only Pages '13 is available and not '09. So now I have no version of '09 at all. Strange how it works with the other iWork apps and not Pages.
I have Pages '09 and '13 on the iMac and am thinking I could create an installation file on the iMac that I could reinstall on the MacBook. Can anyone instruct me how to do this?
Or give other suggests how I can find a source to download Pages '09 (I already searched the web)?
Many thanks in advance.
Cheers
Rich

This is all the files Pages needs:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
Overwise click on my blue name and email me.
Peter

Can't install windows on bootcamp partition

Hi, I got a problem hehe. When I use bootcamp to creat a partition, the windows installation does not reconize the partition. The only parition I can install on is a "patition1" with 131Go... But my hard drive is a 250Go and the parition I created is 32Go so I dont know where they took this 131Go.
Anyway I found that when I creat a big parition... suppose 100Go the Windows installation reconize it. A 100go parition is in NTFS and a 32Go one is in FAT32.
So the question is: How to creat a 32Go NTFS partition with OS X.5.1 or any way to install windows XP on my macbook.
Thanks, Pascal.

Are you sure your XP is a full install and SP2?

How can I create system image of Win-7 only on drive with Win-7 (NTFS) and Win-ME (FAT-32) system partitions

I am trying to create a Windows 7 Image Backup on my Windows 7 Ultimate 32 bit PC.
I have two bootable partitions on my hard drive. One is NTFS and contains the Win-7 system files.
The other is FAT-32 and contains a Windows-ME system.
When it comes to selecting the drives (partitions) for backing up, both are marked as System, and both are selected. Both are also "greyed out) - I cannot uncheck them.
Furthermore, the Windows-7 imaging utility supplied with Windows-7 returns an error saying it cannot image the disk because it contains a partition that is not NTFS.
How can I select and image ONLY the NTFS partition that contains the Win-7 system? That is what I want to do.

Any of the products listed below will backup the contents (all partitions) of your disk drive. The only limitation is that you must install the backup software in Windows 7. You will perform a "Disk and Partition" backup by manually selecting
the disk and all partitions (NTFS / FAT32) and the Master boot Record (MBR) on the drive. The destination / where the Image Backup will be stored should be an external USB drive. With a "Disk and Partition" backup you can restore any partition
to your existing drive or the entire backup (to the same disk drive or a new drive).
EaseUS Todo Backup Home V7.5
http://www.todo-backup.com/home/home-backup.htm
Free version:
http://www.todo-backup.com/products/home/free-backup-software.htm
Version comparison chart:
http://www.todo-backup.com/products/home/comparison.htm
Includes: Incremental backup, Disk/partition clone
User's Guide: http://www.todo-backup.com/download/docs/User_Guide.pdf
(Note: Install Todo and then create an "Emergency Disk" before you start creating your first image backup)
Version 7.0 supports XP, Vista, Windows 7, 8 and 8.1
Acronis True Image 2015:
Has a 30 day trial version available, trial Key sent to your Email Address.
Note: Cloning and drive initialization (creating a MBR) are not supported in the trial version.
For the trial version, recovery is available only when booting from an Acronis Bootable Media CD.
Install Acronis and then create a bootable Restore/Rescue Media CD before you start creating your first image backup
http://www.acronis.com/en-us/personal/true-image-comparison/
30 day trial : http://www.acronis.com/en-us/personal/pc-backup/
True Image User Guides and documentation:
http://www.acronis.com/en-us/support/documentation/
2014 supports XP, Vista, Windows 7, Windows 8 and 8.1
Paragon:
Free version: http://www.paragon-software.com/home/br-free/
User'sGuide:
http://www.paragon-software.com/home/br-free/download.html
Home Version $39.95: http://www.paragon-software.com/home/brh/
Support: http://www.paragon-software.com/support/
Macrium Reflect Free:
Free version: http://www.macrium.com/reflectfree.aspx
(no technical support available for the free version)
Macrum Reflect Standard ($49.99)
http://www.macrium.com/personal.aspx
Suport: http://www.macrium.com/ticket.aspx
Note: For users who have a Western Digital disk drive there is a free version of Acronis 2013:
http://support.wdc.com/product/downloaddetail.asp?swid=119
Release notes:
http://support.wdc.com/download/notes/ATI_WD_RN_5962.pdf
Users Guide for WD Version:
http://support.wdc.com/product/downloaddetail.asp?swid=119&type=userguide&wdc_lang=en
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.

Arch and Win7 cannot open an NTFS partition created by the other

This is almost certainly related to another post where I was struggling to create logical partitions from Windows. Basically, Linux and Minitool Partition Wizard agreed that there were no logical partitions, but the built-in Windows disk utility said there was. I ended up using fdisk from Arch install media, and Minitool and Arch now both saw the logical partitions (Windows shows a big extended partition of free space). I installed Arch just fine, can boot to it and win7... life is good.
Not so much. A key to my setup is having an encrypted partition to share data between OS's. I used TrueCrypt with great success on my former laptop and am now having great difficulty!
Some preliminary information:
# fdisk -l /dev/sda
Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1e6513b3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 2101247 2099200 1G 7 HPFS/NTFS/exFAT
/dev/sda2 2101248 172433407 170332160 81.2G 7 HPFS/NTFS/exFAT
/dev/sda3 172433408 390537215 218103808 104G 7 HPFS/NTFS/exFAT
/dev/sda4 390537216 500118191 109580976 52.3G 5 Extended
/dev/sda5 390539264 391587839 1048576 512M 83 Linux
/dev/sda6 391589888 500118191 108528304 51.8G 83 Linux
I also went partition by partition to check Minitool's agreement on sectors (they match perfectly with the exception that it doesn't show the extended /dev/sda4 container). I triple checked the Minitool partition info properties as you can't copy and paste from it's window, and pasted the fdisk output to minimize errors. I'm showing a column for mini/Arch for both start/stop sectors, and just subtracted them to make sure I got 0. Appears to be perfect alignment:
| part | start (mini) | start (arch) | diff | | end (mini) | end (arch) | diff |
|------+--------------+--------------+------+---+------------+------------+------|
| sda1 | 2048 | 2048 | 0 | | 2101247 | 2101247 | 0 |
| sda2 | 2101248 | 2101248 | 0 | | 172433407 | 172433407 | 0 |
| sda3 | 172433408 | 172433408 | 0 | | 390537215 | 390537215 | 0 |
| sda4 | 390539264 | 390539264 | 0 | | 391587839 | 391587839 | 0 |
| sda5 | 391589888 | 391589888 | 0 | | 500118191 | 500118191 | 0 |
- Screenshot of how Minitool sees my disk
- Screenshot of how Windows disk utility sees my disk
I used TrueCrypt 7.1a on both OS's. I created a non-system encrypted partition using the GUI on Arch with the AES cipher/sha-512 hash, with filesystem as "none." Once created I did:
$ sudo cryptesetup --type tcrypt open /dev/sda3 vault
That worked fine, which I followed with:
$ sudo mkfs.ntfs /dev/mapper/vault
It initialized the device with zero's and then gave me the success/have a nice day message. Closed the volume and rebooted. When I tried to open the device from win7, I got "Incorrect password or not a TrueCrypt volume." Hmmm. I guess I'll try in reverse. I duplicated the procedure exactly as above from win7, this time having TrueCrypt automatically format with NTFS. All succeeds and I can open the device. Reboot into Arch and I get the same message from TrueCrypt! If I try with cryptsetup, it's "No device header detected with this passphrase."
Next, I tried just doing NTFS with no encryption. From Arch:
$ sudo mkfs.ntfs /dev/sda3
All goes well and I can mount it. I boot into Windows and it's not even listed! I used Minitool to issue it a drive letter, at which point clicking that pops up a windows dialog box asking me if I want to format the disk. Format the partition with NTFS in Windows, reboot into Arch and I get:
[jwhendy@arch_zbook ~]$ sudo mount /dev/sda3 /mnt/scratch/
NTFS signature is missing.
Failed to mount '/dev/sda3': Invalid argument
The device '/dev/sda3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Doesn't matter if I add "-t ntfs" or "-t ntfs-3g." I get the same result.
Just to add a couple more oddities... when I created the NTFS partition in Arch, I also created a file called vault.tc as a TrueCrypt file-based encrypted container. My thinking was that the issue was with TrueCrypt full-partitions and that I could get around it with a plain partition containing an encrypted file. Reboot into windows and the partition isn't shown (as stated above). From Minitool, if I right click the partition and choose "Explore," it lists the partition contents and there is my vault.tc file. Windows thinks it's unformatted!
I noticed the option to backup/restore a TrueCrypt header, and gave a shot at backing up the working TrueCrypt setup on windows to a flash drive, booting to Arch, and then restoring the /dev/sda3 header from the flash drive file. Arch still couldn't open it.
Lastly, I noticed when I go to select a device to encrypt in TrueCrypt, my logical partitions aren't showing up (just like Windows only sees the end of the disk as free space). I just can't help but think something is tweaked in the partition table... basically:
- TrueCrypt sees what Windows sees
- Arch sees what Minitool sees
How could I go about diagnosing further or fixing the issue. This is driving me crazy!
I'd hate to do this given that I already setup my wm, configs, packages, etc... but my last resort attempt would be to wipe my logical partitions and see if I can at least get the win7 disk utility, minitool, arch, and truecrypt to like each other with respect to /dev/sda1-3... and then try to re-add the logicals afterward and re-install arch? I honestly don't know why this would be any different, but was just a thought. The issues from the other post seem to arise with logical partitions not being recognized the same between win/linux.
Or figure out how to just use primaries (like dedicated boot on a USB drive or something). Or fiddle with growing/shrinking windows to see if I can undo whatever is telling windows where/what things are? Really grasping at straws here.
Last edited by jwhendy (2015-06-10 23:32:22)

Hi Ramesh,
Please install the hotfix package and test the issue again:
http://support.microsoft.com/kb/2817576/en-us
In addition, try uncheck the option “confirm open after download” per:
http://jritmeijer.wordpress.com/2006/08/20/some-files-can-harm-your-computer-if-the-file-information-looks-suspicious-or-you-do-not-fully-trust-the-source-do-not-open-the-file/
Regards,
Rebecca Tu
TechNet Community Support

Can't create boot camp partition on new macbook pro

Hi all. Having an odd issue installing boot camp on my 2011 Macbook Pro. When I try and create a partition it gives me the following error message:
"The disk cannot be partitioned because some files cannot be moved."
It goes on to tell me that I need to reformat my drive and try again. Seems a little extreme and even worse, I'm wondering if this will work considering that I still have over 600GB of free space available on my drive. Thought I'd post here and see if anyone has had a similar issue before harassing support.

If you look at the pdf guide in Boot Camp Assistant, step one is to backup. Common sense before altering, installing new OS, and should be required of anyone even if just updating Mac OS.
Now, having fragmented space: Apple never considers defragging free space and says Mac OS X defrags some files, and that having more than 25% free should not impact Mac OS performance.
So I think that covers Apple support for their own OS.
When you install updates, applications and such, the patches are compressed, expanded, space is fragmented, and some vendors often choose to write their updates to the far end of the drive in order to leave high access for other portions.
the best and perhaps only way to move files is to boot from another hard drive, rather than pick yourself up by your own bootstraps and try to shuffle files.
I would never recommend using only built in tools. I don't advise Apple DU First Aid as the sole utility for maintenance and repairs for Mac HFS file system. nor would I use TimeMachine alone. They are free and there and better than nothing.
Create a bootable backup clone of Mac OS for one.
Repair your internal drive.
Try using Boot Camp Assistant; or iDefrag; or Paragon CampTune (yes, it can be used to install Windows partition as well as resize partitions now or later if needed). Does a better job.
The use of x86 Intel cpus opened up new possibilities. Some unintended or not foreseen I guess too. A competition challenge to see who could install Windows on a Mac first and easiest took place in 2006. Apple came in later with their beta. but Boot Camp Assistant has always been a weak, lame, partitioning tool.
Macs and users using gparted and other tools? and try to stop the hand-holding concept? unlikely.
A better tool? there should be, and not only that, it really needs to just be rolled into Disk utilty as one more feature and tab along with other tools - so integrated and if you want to create, resize, remove an MBR slice and Windows partition, you can.
Paragon lets you create a partition, and also they have their own NTFS driver so you don't need to format BOOTCAMP (MSDOS/FAT32) during the install phase later.
Of course installing Windows in a VM doesn't have all the trouble of dual boot native install and given RAM and processor resources, can be more than functional enough for many.
With Windows 7 you can install and have a Windows-only computer, remove all traces of Mac OS (and boot OS X off 2nd drive, either with two SSD + hard drive or eSATA or Intel 'Bolt' interface as well as FW800.

RMBP Mid 2014 Windows 7 installer can't create partitions

Hi all,
I have a late 2014 Retina Macbook Pro with 1TB SSD and Intel Iris Graphics (no nVidia). It has been updated to Yosemite 10.10.2.
So for I had good luck installing Windows 8.1 Professional on it via the bootcamp assistant from a USB key. Unfortunately, due to work requirements, I need Windows 7 (compatible VPN clients and proprietary software at a customer). Windows 7 Professional SP1 however won't cooperate. For the record, I off course removed Windows 8.1 first again via BCA.
First problem was that the 16GB Lexar Jumpdrive I used to install Win 8.1 didn't want to boot when it was created by BCA for Windows 7. Even when holding the Option key at boot, it didn't even show in the boot options. Very weird. This was quickly solved by using an 8GB Kingston Datatraveller stick instead which boots fine.
The BCA does all its stuff correctly then but when booting into Windows 7 and starting the install, the Windows installer first complains it must format the bootcamp partition as NTFS. If I then do that, the installer complains it can't create additional partitions.
OK so let's format it to NTFS. Gone is the BOOTCAMP label.
But Windows refuses to install anyway.
I do not have any additional USB drives inserted, nor is there a Superdrive present. Apple support page said to remove any Thunderbolt devices but there are none.
I have looked for similar threads but the reports there are about the fusion drives in the new 5K iMac and Windows 8.1.
So far I have also tried to format the bootcamp partition as ExFat as suggested in other threads but this makes the Windows 7 installer complain it needs additional drivers for CD/DVD and refuses to install.
This is what I see when I hold the Option key during startup when BCA has created the partition and the USB install drive is inserted:
So I'm kind of out of options. Any help or hint would be appreciated!

So this is quite embarrassing. I had already deleted the Windows 7 partition via BCA so to answer your question Loner T, I started BCA again. Unticked create USB installer and download support software and only let it create the Windows 7 partition again. The only difference with last time: I choose 149GB instead of 102GB (thanks to the bloody difficult slider in the BCA).
After bootup of the USB key the install went fine and now I'm looking at a running Windows 7 on my rMBP
Problem is: I have no idea how I solved it. What I did before I posted my question:
- Partition size was 102GB vs 149GB now
- The previous BOOTCAMP partition was erased and reformatted by DiskUtility in ExFat
- It was then removed by BCA
Could this have reset the out of sync MBR vs GPT?
Anyway, it works. Here's the output of the commands:
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1954210119
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1661515288      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1661924928     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1663194464         672
1663195136   291014656      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1954209792         295
1954210087          32         Sec GPT table
1954210119           1         Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 1661515288] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [1661924928 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1663195136 - 291014656] HPFS/QNX/AUX
So I don't really know what I did to solve this... Maybe one of the utils synced the MBR and GPT again?

How do I create a Boot Camp partition with Windows & blank NTFS partitions?

I'm trying to create this kind of setup:
OS X partition
Windows 7 partition
blank NTFS partition (no OS)
blank NTFS partition (no OS)
This would be much easier if I created just the OS X partition and the Windows 7 partition with the Boot Camp Assistant tool (done this many times before successfully on other computers). The problem begins when I try to split the Boot Camp partition through the Windows 7 DVD partition manager during setup by deleting the Boot Camp partition, and recreating three partitions from the unallocated space. After installing Windows 7 on one of those new three partitions, I'm getting all kinds of startup errors when I try to install the Boot Camp drivers.
What would the best way to achieve this setup?

Yes, I researched many options for three partition dual boot set ups. After many trials and tribulations, there is a simple method that I have used on multiple MBPs.
1. Run Boot Camp Assistant, as per the Boot Camp Installation and Setup Guide. Once you have Mac OS X and Windows 7 set up, check the partitions and back them up (with Time Machine, and Winclone).
2. Get iPartition, and resize the Mac and Windows partitions to what you want, say 100GB each, and set up your other partitions to the size you want. I put mine "after" the Windows partition, at the end of the disk, and have had no problems. It takes a few minutes to create the bootable CD for iPartition, but you get everything you need to do so from Coriolis Systems. You will need your Mac OS X installl disc.
3. Install Paragon's HFS+ for Windows and NTFS for Mac, and everybody can read and write everything.
4. I have both Time Machine and Norton 360 back up the Data partitions, just in case -- to an external drive, of course.
You can boot to either OS and access any partition.

Can I Create a 2 NTFS Partitions on my iMac

Similar Messages

Maybe you are looking for