Can I create a custom output settings from Compressor 4 and use it as a export setting in iMovie 10.0.4?

I'm currently using iMovie 8.0.6 However I want to upgrade by downloading iMovie 10.0.4 but I'm upset that iMovie 10.0.4 doesn't give us "Export using Quicktime" option like iMove 9.0.6 and lower versions do (look at picture below)
So I wanted to know could I create a Compressor 4 output setting and use that as a exporting option in iMovie 10.0.4?

Yes and No:
No, you can not - as in FCPX - create your own 'Share Destinations', iM lacks (officially) any APIs too teach it new tricks.
Yes, export from with iM in a high-res format (e.g. 1080 Apple devices), and use that as source for any Compressor output Same workflow, for free, would do Mpeg Streamclip, the most recommended converter tool for MacOs....

Similar Messages

How i can to create a vi, which read from configuration file and i could modify this indicator and save the config data??

Hi guys,
I have in my application a subvi which i use to save the configuration of application. I create one file with the last saved configuration, and i would like to open this values and that i could to modify this indicator value, but i cant since to modify i need 'numeric control' and to read the data from file i need 'numeric indicator '...
I thought, use a numeric control and use the values from file to the default values, but i didnt get to find the property node to adjust it. is it possible? or any different way to get it....??
Also, i attached the capture file.. i would like the program DOESNT SHOW the question of
replace the file!!. i would like directly replace the file when i push save.
Thanks, i attached the vi.
Attachments:
options.vi ‏43 KB
config.cnf ‏1 KB
capture.GIF ‏43 KB

Hi Dennis,
Your 'write to sreadshhet mod' suprime the dialog of replace file or not!, i want when i push save, it show the dialog input name of file and show the default sim000 but when i push this sim000 and this file already exist, then show the dialog to replace or not, if i replace Ok not problem, but when i push cancel replace it shows error eof!!!.
Your file, only remove this dialog and only replace the file directly.
i put the capture, when i choose the file to save and the program say to me this file exist and it give me the option of replace or not,i want when i push cancel replace it continues running without get error.
is it possible?.
Thanks.
Regards, Fonsi.
Attachments:
capture.GIF ‏71 KB
example.vi ‏40 KB

Can i Create a Form Bean ouitside a page controller and use it

In Pageflows all the form beans are created in the JPF file. Is it possible to create the FormBean outside the JPF file and use it in the JPF File..
Regards
Krishna

When you create a bean in a jpf it creates it as an inner class.
If you don't want to use this method all you have to do is to write your bean and import it into your jpf file(s) that use it.

CAN I BUY A MAC BOOK PRO FROM THE STATES AND USE IT IN EUROPE?

i will come on holiday in the states and am planning on buying a macbook pro...can i use it in europe. cos i know the voltage in europe is diff from US.

Yes - the power supply is auto-sensing for 110-240V.
You'll obviously need some kind of physical adapter though.
Bear in mind that a US macbook comes with a US keyboard where the top line characters are mapped differently from the various European versions - Dollar sign, Euro sign, Pound sign etc.
And check the warranty arrangements in case you have to take the mchine back to America to get warranty servicing done.
Strictly speaking, you may also be liable for local taxes on value of the computer when you get home. Sales taxes, import duties for example. Probably not a great concern.

How can I create a custom field in contacts and have it appear in ICal?

How can I create a custom field in contacts (death date) and have it appear in calendar?
Birthdays seems to work fine but I'd like to do the same for a custom field called Date of Death

By default, iTunes convert files to type AAC which has an extension of .m4a
For iTunes to recognize them as Audiobook files, the extension needs to change from .m4a to .m4b
This can be done a number of different ways. Here are 2 (beginner and advanced)
. simply, by renaming each file from windows explorer
. more complex, by using Start/Run/cmd to get a "DOS" type window,
using the command "cd" to change to the directory that your files are in
and entering "ren *.m4a *.m4b"

How can I create a custom sized video in PP cs6?

How can I create a custom sized video in PP cs6? I have read references to the "desktop" setting but cannot find it. I am trying to find the right settings for a 1080 px x 486 px video (which I need to qualify for hi res on Vimeo). I need to output a 450 x 1000 px video for
my website. Ideally, I'd like the sequence settings as well as the output settings. I am using still shots- no actual video.

What are the exact properties of the still images, particularly the pixel dimensions and pixel aspect ratio (PAR).* The letterboxing (black bars top & bottom) is most likely a result of a mismatch in these settings. If this is the case, then the easiest fix is to make sure not only the dimensions but the PAR match.
Say for instance your source images are 1000x1000 with a PAR of 1.0 (square pixels) and your sequence is set also set to 1000x1000 but with the PAR set to D1/DV NTSC (0.9091), the result would be letterboxing as seen here:
*if you're not sure about the PAR of your source images, right click on one of them in the Project panel and select Properties.

How can you create a writable PDF document from a PPT presentation ?

How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
Thanks.
B

You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
Open your PowerPoint Document then go to “File” “Print”
Select ‘Adobe PDF” Printer
Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
Default: PDF/A 1-b
Adobe Security: none (change as needed)
Adobe Output folder: Prompt for Adobe file name
Adobe Page size: Letter (change as needed)
Check the following check boxes
View Adobe PDf Results,
Add Document Information,
Rely on system fonts only,
Delete Log files for successful jobs.
Select OK
A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
Hope this will help.
Tiger26

Can I take a frame from my project and use it as a custom menu background with CS4 and its Encore

My project is edited in CS4.
I moved it to Encore CS4.
I don't want to use any of the supplied menu templates in CS4 Encore.
I was hoping CS4 would be all I needed to create custom menus using scenes from my project.
My question is: Can I take a frame from my project and use it as a custom menu background with CS4 and its built in Encore or do I need some other element from the Adobe catalog to make these custom chapter menus and sub-menus?
Thanks Jim

OK, I'm back. Here are my steps for creating Custom Menus with PS, En and PrPro:
In PrPro, move the CTI (Current Time Indicator) to the desired Frame. Check Frames on either side, with the Program Monitor’s Magnification to 100%, or maybe even 200% (you’ll need to scroll, but get a really clear picture). You want the clearest Frame in that area. With AME, in CS4, you’ll want to Export that Frame as .TIFF, or .BMP. I use .TIFF for this.
Now, for a caveat. When you Import this Exported Frame into Photoshop, be sure to check the specs., especially the PAR. You may have to use Image>PAR to adjust this to match your Project’s specs. Or, all might be perfect - just check this out.
Now, at this point, I choose the Library Menu, Blank, so that everything is setup. One can create the Menu from scratch, but careful attention needs to be paid to the exact naming conventions. At the very least, unless you’ve done this dozens of times before, use that Blank Menu, or similar as a guide, so you get things done, as they must be done.
Using that Blank Menu, just drag the Layer from your Exported Frame to your Menu image. It will appear above the black Background.
Add, or manipulate your Button Layer Sets, as is required, keeping them together. Remember that Button #1 will be the Button Layer Set, that is lower down in the Layers Palette. This can play a roll with Button Routing, back in Encore. Lower Button Layer Sets will have lower Button numbers.
Now, I always rename my Button Layer Sets, keeping the required characters - just changing the name. I also do all of my Button text in PS, and make sure to turn OFF Sync Button Names.
When done, Save_As .PSD, and then Import_As_Menu into Encore. Note: if you start with the Blank Menu, you can choose Edit in Photoshop, and then when done in PS, you just need to Save, and it will update in Encore. This is a personal workflow choice. I do the Edit in Photoshop route, but it is not necessary. One just needs to Import the resulting .PSD into Encore with Import_As_Menu, so that Encore does all the things that it needs to and recognizes the .PSD as a Menu.
When deciding what to base your Menu on, remember that you can "populate" your Menu with Buttons from the Functional Content. I’d suggest studying these Assets, and picking the ones that work best for you. You can still alter/edit those back in PS, so you just need to "get close."
Pay special attention to the required naming conventions. You cannot deviate from those first characters in the Button Layer Sets. They MUST be followed.
If you have any questions, do not hesitate to ask.
Good luck,
Hunt

Can I create a custom scrollbar for my spark datagrid

Basically I'm trying to customize the look of my spark datagrid.
I'd like to change the header appearance and I'd also like to create a custom scrollbar.
If only Catalyst would implement a custom datagrid component. I mean the datagrid is a very popular component, isn't it?
Thanks
kristin

You need the password for free apps as well as for paid apps. The only ways that you can control what your child downloads is for you to supervise while the downloading is taking place or by totally restricting download apps with restrictions.
When you enter your password and download content, you have 15 more minutes to continue downloading before you have to enter the password again. So if you download and app - then give the iPad to your child - he or she can continue downloading apps or music or any content for the next 15 minutes without any restrictions. IF you sign out of your account, then the child can no longer download. IMHO - You should NOT give your password to your child. That really is not a good practice.
You can set restrictions on the iPad so that the child cannot download any apps at all. Go to Settings>General>Restrictions>On. Then you will have to enter a passcode for the device which you do not want to forget (if you do, you have to restore the device) so if you do this remember your passcode. You can then go to the apps settings within the restrictions and Enable Restrictions and turn off Installing Apps.
This article will provide more information for you.
http://netsecurity.about.com/od/frequentlyaskedquestions/a/How-To-Setup-Parental -Controls-On-An-Ipad-Ipod-Touch-Or-Iphone.htm

How can i create a custom table in to my banking services server

I am having product type and account type details for those things I need to create a table
Product Id.                 Account Type
DP_PYGO_P     21
DP_BASIC     25
DP_UNLIMIT     24
DP_ADVANTG     17
DP_SAV                     34
DP_TBILL                     54
DP_USDCHQ     19
DP_FREEDOM     52
For the above fields how can i create a custom table into banking services server

Transaction SE11, maybe? I don't really see the problem, unless you have never created a transparant table before...

How can I create a java.awt.Image from ...

Hi all,
How can I create a java.awt.Image from a drawing on a JPanel?
Thanks.

JPanel p;
BufferedImage image =
new BufferedImage(p.getWidth(), p.getHeight, BufferedImage.TYPE_INT_RGB);
Graphics2D g = image.createGraphics();
p.paint(g);
g.dispose();

How can i create a custom object 0REQUID

Hello all,
I have a question. How can i create a custom object 0REQUID? Is it possible to create it without actvating BI content?
Thanks in advance..

Hi,
If you want to create a new info object which is a copy of 0REQUID. then
Go to > info object key figure / Chara catalogue> create new key figure / Chara --> enter 0REQUID in front of TEMPLATE and you will get all details of 0REQUID in your new key figure / chara.
Hope this helps.
Assgn pts if helpful.
Regards
Edited by: chintamani deshmukh on Apr 14, 2008 11:09 AM

Can't create a custom installer ARD 3.6.1 + OSX 10.8.3

Hi guys,
I am new to ARD, and straight out of the gate I've got issues!!
I can't create a custom installer, its giving me the following error:
"An unexpected error occurred while creating a custom installer."
I've done some searching and the only issues I can find are form older versions back in 2007!
If I choose to not customise an installer is saves fine, but as soon as I customise one I get that error.
Any assistance would be much appreciated!
Thanks,
Ben

Hi,
Just install the lastest Client version ...
http://support.apple.com/kb/DL1594?viewlocale=fr_FR
And it works again !!
Julian

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb again?

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb from the App Store again? My problem is my 4Gb/month allowance on a 12 month contract. I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

HI tasclix, it depends what you mean by an OS X boot drive.
If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X Mavericks.app"; see this article:
http://support.apple.com/kb/HT5856
Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
Message was edited by: SilverSkyRat

Hi, My IMac Superdrive has gone bust and i need to re-install Adobe CS5.5 design premium middle east version. I have the original version DVD with me. But i am unable to install. Can i create an USB installation drive from the DVD or can you please

Hi, My IMac Superdrive has gone bust and i need to re-install Adobe CS5.5 design premium middle east version. I have the original version DVD with me. But i am unable to install. Can i create an USB installation drive from the DVD or can you please send me a link to download the Middle east version of Adobe CS 5.5 design premium. After downloading i can enter the product key which i had bought. appreciate if anybody can offer a solution urgently. All my jobs are held up. thanks

Download CS5.5 products
Mylenium

Can I create a custom output settings from Compressor 4 and use it as a export setting in iMovie 10.0.4?

Similar Messages

Maybe you are looking for