Can i create a new function (Fade out, Amplify down, Fade In)

Hi,
I am using Adobe Audition version 3.0
Is it possible to define a new function, so that i can select a short piece of the audio file within Edit View, so that the first 5 miliseconds (of the selected piece of audio) will be applied a Fade Out, and the last 5 miliseconds will be applied a Fade In, and in-between will be Amplified by -12dB.
I have to do this hundreds of times within a 1 hour recording of speech which has many short pauses, in order to remove small external noises between the words.
I normally select (one by one) the space/pause between the words and amplify this by -12 dB. Then i select the preceeding 5 miliseconds and apply a Fade Out. And the 5 miliseconds after the pause a Fade In.
I have only discovered today how to create short-cuts, so at least i have a short cut for the Amplify, Fade Out and Fade In.
But it would be great, if i could somehow define a function as i described above, to do all 3 steps within the one function.
Any help or tips appreciated.
Dave

[email protected] wrote:
Hi,
I am using Adobe Audition version 3.0
Is it possible to define a new function, so that i can select a short piece of the audio file within Edit View, so that the first 5 miliseconds (of the selected piece of audio) will be applied a Fade Out, and the last 5 miliseconds will be applied a Fade In, and in-between will be Amplified by -12dB.
I have to do this hundreds of times within a 1 hour recording of speech which has many short pauses, in order to remove small external noises between the words.
I normally select (one by one) the space/pause between the words and amplify this by -12 dB. Then i select the preceeding 5 miliseconds and apply a Fade Out. And the 5 miliseconds after the pause a Fade In.
I have only discovered today how to create short-cuts, so at least i have a short cut for the Amplify, Fade Out and Fade In.
But it would be great, if i could somehow define a function as i described above, to do all 3 steps within the one function.
Any help or tips appreciated.
Dave
You might be able to - but this is going to require quite a complex script that would need some serious editing by hand, and even then I'm not absolutely sure that it would work. The previous problem with this sort of script was that due to an 'anomaly' in the program, the - (minus) sign wouldn't work in a script, but I think that with the 3.0.1 patch, it does again. And even with this working, it's going to require some experimentation. Initially you need to refer to ryclark's method of entering absolute values which you will find here, and then you have to find a way to realise the whole operation a step at a time. You'd have to handle the fade out and the fade in separately, but where I think you might come considerably unstuck is trying to fade to -12dB for the middle section - that's probably the bit that would perhaps require slightly more than might actually be possible. I'd be quite happy to be proved wrong about that though!
I'm afraid that there's no documentation at all for the scripting language - this is something that Adobe, and Syntrillium before them, have never quite managed to provide, despite promising me some a while back. The good news though is that if you can make this work, then it's relatively straightforward to assign a shortcut key to it. But I should warn you now that this would be one hell of a script...

Similar Messages

HT1918 If you are locked out of your account and you dont use that email address anymore, can you create a new account without losing your music library

If you are locked out of your Itunes account and you no longer use the same email address, can you create a new account without losing your music library

Just to let you know that I DIDNT swear in the last post. It was bleeped for using non offensive language. Just letting you know. (And @moderator this subnote isnt "off topic", its just letting colleagues know I'm not in the habit of swearing - something that the search and replace word-bot actaully makes it look worse than it is!!)
Many thanks - please dont delet this footnote (again)
Dom

How to create a new function module?

I was doing the tutorial to create a SAP data widget and the tutorial was using BAPI_FLIGHT_GETLIST to display the data. However, in my system, theres no data in the table SFLIGHT2 and i couldnt populate any data in it.
So i am trying to create my own function module. Can anyone tell me how should i go about doing it?

Hi Low Soon ,
please check the below links for creating a new function module.
SAP Help :
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/frameset.htm
Step by Sterp approach to create a Functional Module:
http://www.****************/Tutorials/ABAP/FunctionModule/page1.htm
Thanks
Jaideep Srinivasan

I can't create any new reminders on my iPhone 5S with iOS 8.

Hi.
I have a 16 GB iPhone 5S with iOS 8.1.3. The problem I have is that I can't create any new reminders, at all. The problem started with my iPhone 4 (which I had before this phone), and I was using iOS 7 when the problem arose (but it didn't start immediately after I switched to iOS 7).
One day when I had the iPhone 4, I noticed that all my reminders had disappeared, and that I couldn't create any mew ones because the New List + button is grayed out. I didn't try to fix it until I got my 5S. I got to the "Scheduled" list and was able to type in a reminder (I thought I was a genius). But then when the time I'd set for the reminder actually came around, nothing happened, and when I checked Reminders, the reminder I'd entered was gone.
I tried using Siri to set a reminder but she said she couldn't.
I've tried Googling it, but it just says to press the + button to make a new list, and then start typing.
I recently got a MacBook Air which I synced up to my phone, and all my old reminders from my iPhone 4 are there, and I can create new reminders. Except they don't show up on my phone (which I think they're supposed to do, right?). They do show up on my computer, though.
I've taken to emailing myself things I need to remember, which is fine, I guess, but sometimes they get buried in my inbox.
Any help would be fantastic!
Also, if you'd like me to clarify anything, I'm happy to do so because I don't know how much sense this makes.
Thanks so much!

I have exactly the same problem. I discovered it yesterday.
I have a 16 GB iPhone 4 with iOS 7.1.2, just to note that we both are using different devices and different iOS versions. I will add here some screenshots of the problem.
Main view of the application when opened (the only tappable elements here are the search bar and the clock icon on the top):
Result of tapping the search bar and searching for an existing reminder:
Result of tapping the clock for showing scheduled reminders:

Can I create a new album in the photos then delete the photo fro the camera roll and it still stay in the album if so I do I do this?

Can I create a new album and moved the pictures out of the camera roll into it then delete the pictures from camera roll and they still be in the aalbum if so how do I do this?

Hey Nyanza,
Clean out your Camera Roll the same way you'd clean out your still camera: sync to your computer. iTunes will move the photos to iPhoto (Mac) and give you the option of deleting them from Camera Roll. Do so. You can sync them back on once they are organized in iPhoto. Do you really need 3000 images?
If you are on a PC, it's a little more difficult as there is no photo app on the PC to make it easy. Save the pictures to My Pictures like you would your regular still camera. Organize into albums. Sync the albums back on via iTunes.

Can I Create a New User Account and Move Existing Account ???

Lion was reinstal.
I'm suspecting issue with one user account.
Can I creat a new user account and move all my files to that new user?
What are the impact?
How about permissons on this files?
What about the Library Folder?
Thank you for your help and support.
BigBlaze

This should help you out after you have created the new user account. You are trying to make it much more complex than it needs to be. Just follow the directions in:
Transferring files from one User Account to another.

How can I create a new name and itunes acct

I want to give my old 2nd generation ipod nano to my son. Can I create a new device name and itunes for the ipod?

Yes. I would suggest creating a separate user account for him on your PC to use to store his own separate iTunes library. See Method 1 from this Apple support document for more information and assistance.
How to use multiple iPods, iPads, or iPhones with one computer
When he connects the iPod to this new iTunes library he'll need to Erase and Sync (or restore) the iPod allowing him to set it up as his own iPod and everything just as if you had just taken it out of the box.
B-rock

How can I create a new iCloud account and transfer my apps?

I'm sharing an iCloud and iTunes account and want to have my own. Can I create a new iCloud account and transfer my contact list? If I keep the existing iTunes account with the new iCloud acct, can I reload my apps without purchasing them again? I understand I can create a new iTunes acct afterwards.

OK, so you can create a separate Apple ID for yourself that you use for your Messages, iCloud, Mail, FaceTime, etc. and keep the one that you have your Apps on as your iTunes "Family" Account.
Before you set up your new Apple ID, be sure to delete your iCloud account from your device: Settings>iCloud, scroll to the bottom and delete the account. Save your Contacts on your phone so you can merge them with your new iCloud account. Your notes, and Photos will still be on your old iCloud account, but if you want to keep any of your photos on your new iCloud account, it would be a good idea to import all of your photos to your computer first, so you can selectively download them to your device. (Note: only your Photo Stream will go away when you delete your iCloud account. Your Camera Roll will stay in place. It's just a good idea to back up that Camera Roll to a computer or to your new iCloud account immediately once you have set it up.
You then would set up a brand new Apple ID for you under Manage your Apple ID: Apple - My Apple ID
Once you get it set up, go into your devices and sign off the following:
Settings>Messages>Send & Receive, click on your "Family" Apple ID and Sign Out
Settings>Facetime, click on your Apple ID and sign out
You will leave your "Familiy" Apple/iTunes ID signed on on the iTunes & App Store, becasuse you willl continue to share your iTunes account with the family. Here is a little more info about using two Apple IDs:
Using your Apple ID for Apple services
Once you have your new ID set up, go back into Messages and FaceTime and sign back in with your new ID
Also, go to Settings>iCloud and sign in with your new ID, and be sure to "Merge" your contacts into your new iCloud account.
Post back with any questions!
Cheers,
GB

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Hey Hindfromlondon,
Welcome to Apple Support Communities. Since you are posting here, I take it you already have an Apple ID.
You can setup that Apple ID to work with iCloud. See:
Set up your Apple ID for iCloud and iTunes - Apple Support
And you usually want to stick with one Apple ID as having multiples can cause confusion (especially with purchases).
Frequently asked questions about Apple ID - Apple Support
What is an Apple ID?
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID.
For a complete list of all of the places you can use an Apple ID, see Where do I use an Apple ID.
and further down:
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Regarding iCloud storage check out
iCloud storage upgrades and downgrades - Apple Support
I encourage you to read all about it as there's lots of information out there.
Take care,
Nubz

Can I create a new GeneratedItems folder?

No luck with my first question. So maybe this one is easier?
I've noticed that my page on my system also does not work (rollovers or actions) and I have tried it both ways as well (import from library and encode into page), so I was wondering about a corrupt CSScriptLib.js file? And can I create a new one from the page somehow?
Once again the site is www.bluemoonbandblues.com/index4.html if you can help.
Thanks again in advance.
Eric

Try this. Back up your entire site folder somewhere safe, then delete the Generated Items folder. Made a small change to an action - Golive should create a new Generated Items folder. Don't ever do anything to your site or files from then on unless via the site window - as I pointed out in your other thread, this is usually what causes such problems.

On Mac and Firefox 3.6.6., I can't create a new folder in organize bookmarks because it is grey. I used to be able to do this. How do I create a new bookmark?

On a Mac and Firefox 3.6.6., I can't create a new bookmark in the organize bookmark folder, because it is gray. I used to be able to do this. How do I create a new bookmark in the bookmark folder?

For what it's worth, here's the bug on this: https://github.com/adobe/brackets/issues/1577. It will be fixed later when we move the Getting Started files out of the install folder.
- Peter

How to create a new table based out of old data rows

Hi All,
How to create a new table based out of old data rows. Also how can we find out the DBF for different users in a database?
Saqib

Not very clear what you need. I'll try to interpret...
How to create a new table based out of old data rowsIf this means how to create a table from an existing one, then you can do :
SQL> create table <new table> as select * from <old table>;
if you need a subset of rows you can add a where clause.
how can we find out the DBF for different users in a database?Here I need some more clarification. What do you mean exactly ?

Can I create a new Queue/Topic in client application?

In sun's JMS turorial the application client sends messages to the queue, which is created administratively, using the j2eeadmin command. Can I create a new destination(queue or topic) in my client's code?
Thanks very much.

Thank you very much, flhood. This is my first time to gain aid from website except my school's BBS.
But I still cann't solve the problem, here is my code, can you help me to check it if there is anywhere that I might do wrong?( I omit the try/catch part)
QueueConnectionFactory queueConnectionFactory =null;
QueueConnection queueConnection =null;
QueueSession queueSession =null;
Queue queue =null;
Queue tempQueue =null;
QueueSender queueSender =null;
TextMessage message =null;
final int NUM_MSGS;
Context jndiContext =null;
jndiContext =new InitialContext();
queueConnectionFactory =(QueueConnectionFactory)jndiContext.lookup("QueueConnectionFactory");
queueConnection =queueConnectionFactory.createQueueConnection();
queueSession =queueConnection.createQueueSession(false,Session.AUTO_ACKNOWLEDGE);
queueConnection.start();
queue =queueSession.createQueue("MyQueue");
tempQueue =queueSession.createTemporaryQueue();(Actually I don't know why I shall need a tempQueue if I have the queue.)
queueSender =queueSession.createSender(queue);
message =queueSession.createTextMessage();
NUM_MSGS=10;
for (int i =0;i <NUM_MSGS;i++){
message.setText("This is message "+(i +1));
System.out.println("Sending message:"+message.getText());
queueSender.send(message);
These codes run well if I lookup in the JNDI for the existing queue "MyQueue", but when I try to make it dynamically, the resutlt shows(I only use texteditor+j2sdk1.4+j2ee1.3.1):
Java(TM) Message Service 1.0.2 Reference Implementation (build b14)
Sending message:This is message 1
Exception occurred:javax.jms.InvalidDestinationException: No Destination found f
or name: MyQueue
I use deloytool to check the destionation, of course the "MyQueue" hasn't been created, but I use try/catch to brace these two line:
queue =queueSession.createQueue("MyQueue");
queueSender =queueSession.createSender(queue);
Nothing gain.
They are really puzzling me!

How to create a new function group in EEWB creating new fields.

Hi gurus,
Iu2019m creating an enhancement of the BP Object through EEWB, but when I finish I received the following message:
Message no. FL030
Diagnosis
You attempted to add a function module to a function group that is already full. A function group can contain a maximum of 99 function modules.
Procedure
Create a new function group or reorganize the existing one.
Could you guys kindly guide me in how to create or reorganize the function groups in order to include the total of my custom fields?
Thanks in advance!

Hi,
the issue has been investigated in the customer system.
You're trying to create a table extension using EEWB and the table has 55 fields and each field has checktable.
EEWB creates for each field with checktable 2 function modules. However, there is a limitation that one function group
can contain only 99 function modules. That's why you got the error.
Possible solutions can be following:
1. Design question: Do you really need checktable for all fields? Do you need all 55 fields in one table? Otherwise, you can split it into two tables.
2. Instead of using checktable, you can also use domain fixed values. For that you have to define your own data element and domain with fixed values.
Regards,
Steve

Can i create a new function (Fade out, Amplify down, Fade In)

Similar Messages

Maybe you are looking for