Can I create a pamphlet using Elements?
I am wondering if it is possible to create a pamphlet using Photoshop Elements? I have done so using another version of Photoshop but never Elements. Thanks!
Yes.
In Editor, go to File>new>blank file. Enter the dimensions for the pamphlet. For resolution, enter 300px/in.
Use the Type tool to add text.
.Add graphics, logo, etc.
Use the move tool to position each of these components. They should come in on separate layers.
Similar Messages
-
Can I create club flyers using Elements 10? Is Elements a capable software to do?
Can I create club flyers to post on facebook using Elements 10? Is Elements a capable software to do this project? Thanks Everybody !!
That swirl effect is an interesting one. I "cheated" and created the swirl in CorelDraw (vector graphic) and exported it as an EPS file, then imported the EPS into the image in PSE.
Given this original image:
This is the swirl:
Here's the result:
The layers look like this:
The steps:
Opened the original image of Katie.
Double-clicked on that background image to convert it to a normal layer.
Used the Quick Selection tool to select her.
Inverted the selection and hit the Delete key to remove the background. This became layer "Katie base".
Duplicated the layer. This became layer "Katie erase".
Used File...Place to import the EPS swirl. This is the hidden layer "swirl".
Made two duplicates of the swirl layer and simplified both layers.
The "swirl copy sparkle" layer had the Outer Glow...Noisy effect applied with a size of 10px, an opacity of 100% and a pure yellow colour.
The "swirl copy 2 inner shadow" layer has these effects:
Inner Glow -- Size: 6px, Opacity: 100%.
Bevel -- Size: 2px.
Inner Shadow...Reverse Shadow.
Then I used the Eraser tool with a hard-edged round brush on the "Katie erase" layer to reveal the swirl and its sparkle in specific areas.
I added a new layer at the bottom of the stack (the "Background" layer) and applied the Filter...Render...Clouds and Filter...Stylize...Wind to it.
Added a Hue/Saturation layer clipped to the "Background" layer to adjust its colour.
Added a new layer at the top of the stack (the "Starburst" layer) and used the Assorted Brushes...Starburst Small brush with white at 123px size, with its angle changed to 28d to create the starburst, clicking 3 times to get the opacity I wanted.
As far as I can remember, that's it!
I think the swirl can be drawn directly in PSE using a tablet and pen to get the width variation, but I was too lazy to hook it up....
Ken -
How can I create DVD Label using Photoshop Elements 10?
How can I create DVD label using Photoshop Elements 10?
RichardYou can create the design for a DVD label in Create>More Options. Once you have the label set up, you would copy it to a template for the labels you plan to use. (The PSE template makes one label, while most printed labels are two-up.)
-
"Can't create part for model element: null"
Hello Colleagues,
I am developing a Widget using Eclipse. Yesterday I closed the project and today I tried to open it again. For some reason, it seems that the config.xml file is corrupted. When I open the editor, I receive the following error:
"Can't create part for model element: null"
I tried to find out where in the xml file is the error, without success.
Do you have any clue to get it solved?
If you need some more information, please let me know.
Thank you very much!
RafaelHi Rafael,
What version are you using? I have had similar problems in the past. Worst case I had to recreate the widget and copy the coding across.
Can you send me the project file, I will understand also if you do not want to, I will try it on my machine.
Regards
John -
Can I create a book using the IBooks Author word processing software, save it as a PDF, then have it professionally printed on an offset press to sale in brick and mortar stores? If so, is this procedure free from any IBooks restrictions?
It's your content, under your control.
If you output as an .ibooks file, and you want to sell it, the store is the only outlet, otherwise, you can do as you wish. -
How can i create splash screen using netbean?
how can i create splash screen using netbean?
Welcome to the Sun forums.
gabbyndu wrote:
how can i create splash screen..Java 6 offers a splashscreen functionality. See [New Splash-Screen Functionality in Java SE 6|http://java.sun.com/developer/technicalArticles/J2SE/Desktop/javase6/splashscreen/] *(<- link)* for details.
[Java Web Start|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] has offered splash screens to applications since Java 1.2. See [How can I provide my own splash screen?|http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#206] in the JWS FAQ for more details.
.. using netbean?We don't support Netbeans here. Ask that on a [Netbeans forum|http://forums.netbeans.org/]. -
How can i create slaes order using BAPI
hi all,
i didnt work on BAPIS .how can i create sales order using BAPI here i should pass Z values.
Moderator message : FAQ, search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 13, 2011 12:22 PMHi!
There are a lot of answered threads regarding your question. Try searching first. Below is a sample link.
BAPI_SALESORDER_CREATEFROMDAT2
Regards,
Steph
Edited by: stephquion on Sep 13, 2011 8:25 AM -
Can I create Oracle Database using Java ???
HI ...
Can I create a Database using Java... ? If yes can any one tell me how ? I mean provide some codeing help... ???If you mean a table yes, since the create table statement is exactly that, an SQL statement, if you mean an SID then I would have to say (AFAIK) no.
-
How can we create info record using IDOC INFREC?
Hi Friends,
Can we create info record using IDOC INFREC. If Yes. How?
Regards,
NarendraUsing IDOC INFREC & FM IDOC_INBOUND_SINGLE
-
I can't create an Infotype using PPCI
Hello all!!
Please, I need help!!! I can't create an infotype using PPCI. After a lot of changes, I've created some objects by hand, but, when I execute transaction PPCI I still have the same error, Impossible to create.
Following you can see the tree... please, can anybody help me!!!
Infotype 9504
Dictionary
Structure HRI9504 exists
Structure P9504 exists
Table HRP9504 exists
HRP9504 created in the database
Database index XXXX not created
Module Pool
Module pool MP950400 exists
Include MP950420 exists
Include MP9504BI exists
Screens
Screen 1000 exists
Screen 2000 exists
Screen 3000 exists
User interface
User interface for MP950400 exists
Table entries
T778T: no table entries exist
T777T: no table entries exist
T777D: no table entries exist
T77ID: no table entries exist
T777I: no table entries exist
T777Z: no table entries exist
T77OA: no table entries exist
T777M: no table entries exist
T778U: no table entries exist
T777U: no table entries exist
T77NI: no table entries exist
SOBJ entries
OBJECT PDST: no table entries exist
OBJECT PDWS: no table entries exist
TADIR entries
R3TR TABL HRI9504 exists
R3TR TABL P9504 exists
R3TR TABL HRP9504 exists
R3TR PROG MP950400 exists
R3TR PROG MP950420 exists
R3TR PROG MP9504BI exists
R3TR DIAL RH_INFOTYP_9504 does not exist
Please, how can I create the index and the Dialog Module? I can't created by hand using SE35!!
Need help!! Thanks!!!!Hi Rebeca,
Please maintain tables manually via SM30.
You can check the following article :
http://www.sdn.sap.com/irj/scn/articles-erp-all?startindex=81
And please close other threads on the same subject.
Regards,
Dilek -
Can I create PAdES signature using Adobe Acrobat 8.0 or 9.0?
Hi
Can I create PAdES (PDF Advanced Electronic Signatures, Technical Specification ETSI TS 102 778) signature using Adobe Acrobat 8.0 or 9.0?
ETSI Technical Specification (TS) 102 778 contains five parts:
• Part 1: PAdES Overview – a framework document for PAdES
• Part 2: PAdES Basic – Profile based on ISO 32000-1
• Part 3: PAdES Enhanced – PAdES-Basic Electronic Signatures and PAdES-Explicit Policy Electronic Signatures Profiles
• Part 4: PAdES Long Term – PAdES-Long Term Validation Profile
• Part 5: PAdES for XML Content – Profiles for XAdES signatures of XML content in PDF files
All five parts were published on 31 July 2009.
Thanks for answer.
DraganHi,
The short answer is yes.
Acrobat 8 and later support all of requirements of PAdES such as serial signing, long term validation (time stamping and embedded revocation responses) and signatures in the PKCS#7 format.
Steve -
Can't create a file using fm 'File_Get_Name'
hi gurus,
Can you please help me with this issue. There's a program that have to create a file using the said fm. It was working before when it was set in OS NT. But when the settings and codes have been changed to UNIX, the program was able to generate the program. But the file doesn't exist. It seems it doesn't create a file in that server.
What else do I need to check?
Points will be rewarded. Thanks
Here's the code for your reference:
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
* CLIENT = SY-MANDT
logical_filename = 'Z_SYSBRIDGE'
OPERATING_SYSTEM = SY-OPSYS
* PARAMETER_1 = ' '
* PARAMETER_2 = ' '
* USE_PRESENTATION_SERVER = ' '
* WITH_FILE_EXTENSION = ' '
* USE_BUFFER = ' '
IMPORTING
* emergency_flag =
* file_format =
file_name = ltfile-out_path
EXCEPTIONS
file_not_found = 1
OTHERS = 2.Hi Maui,
Did you check SM69, where the code that ties to this FM creates a file after it execute your FM...
SM69 are os commands that does UNIX execution or other OS commands...
or maybe you have missed another FM like FM 'SXPG_OS_COMMAND' or of some sort.
Thanks
William Wilstroth -
How can I create an iBook using iBooks Author using images from a PDF?
I have a complex book with custom fonts and lots of images, and the client wants it on the iPad. So my most reasonable option seems to be to take images from a PDF and use them for the pages. However, images in iBook Author don't get "laid out" as expected in Portrait mode. How can I create a layout that is essentially one image per page in portrait mode, and then convert that to landscape mode? Or is there an easier way to go about this?
tk0us wrote:
Make sure you have disabled portrait in the Inspector.
I don't understand why portrait mode defaults images and other "widgets" to thumbnails. The original format of the book (and of 99% of all books I'm guessing) is in portrait format. By forcing the book to work only in landscape mode it's forcing the page image to be half the size, and that makes using this book particularly difficult. Is there no way to force the pages to be full-size in portrait mode? -
How can i create Jar file using Eclipse IDE.
Hi Guys
Am new to java. I want convert my project into executable jar file.
In my project am using itext.jar.And some other folder.
already i create jar file.But its not working.only its working 4 modules after that its say file cannot found exception.but the file path is correct.i dont know why its happen.
This is my project folder strutre also
Log:->
src(folder)
logs(folder)
comments(folder)
lib-->itext.jar.
images-->1,gif
properties-->catconfig.properties (file)
now can i create jar file
this code also show error when i run the jar file
And this is my catconfig. properties file
fileName=total_system_log.log
DDSingle=DD_bysingleIP_comment.txt
DDRange=DD_byrange_comment.txt
NDPing=ping_comments.txt
NDFPing=fping_comments.txt
reportFileName=report.txt
moduleFileName=Modules.txt
propFileName=nameDetails.properties
Choice=DDSingle
logFileName=DDSingleIP_10.32.0.2.log
finalReport=FinalReport.txt
logFilePath=\logs\
commentFilePath=\\Comments\\
its very urgent for me . could u pls send my error and u r ideas.
thanks for u r Ansewering.
import java.io.BufferedReader;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.InputStream;
import java.io.RandomAccessFile;
import java.util.Properties;
import java.util.ResourceBundle;
import java.util.ArrayList;
public class LogReader {
public void getValuesFromFilesOnly(String Choice,String logFileName)
try {
ArrayList commentsList = new ArrayList();
ArrayList tempList = new ArrayList();
String userdir = System.getProperty("user.dir");
String logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
String commentDir =ResourceBundle.getBundle("catconfig").getString(Choice);
String commentFilePath=ResourceBundle.getBundle("catconfig").getString("commentFilePath");
String currentdir1 =userdir+logFilePath+logFileName;
StringBuffer strBuff=new StringBuffer();
RandomAccessFile randomFile = null;
RandomAccessFile commentsFile = null;
String tempLine = null;
String commentLine = null;
String catVersion = null;
String finalReport=null;
int colon = 0;
int counter = 0;
boolean startFlag = false;
boolean endFlag = false;
boolean endOfFileFlag = false;
System.out.println("Log file checked----->"+currentdir1);
System.out.println("comments file used--->"+commentDir);
try {
randomFile = new RandomAccessFile(currentdir1, "r");
} catch (Exception e) {
System.out.println("exception@getValuesFromFilesOnly@begin : "+e);
System.out.println("hi test1");
String commentDir1=userdir+commentFilePath+commentDir;
try{
System.out.println("Comment Dir:"+commentDir1);
commentsFile = new RandomAccessFile(commentDir1, "r");
catch (Exception e) {
System.out.println("exception@getValuesFromCommentDirOnly@begin : "+e);
while ((commentLine = commentsFile.readLine()) != null) {
String checkLine = commentLine.substring(commentLine.indexOf("=")+1, commentLine.length());
String message = commentLine.substring(0,commentLine.indexOf("="));
commentsList.add(checkLine);
commentsFile.close();
String startComment = (String)commentsList.get(0);
String endComment = (String)commentsList.get(commentsList.size()-1);
strBuff.append(" CAT LOG REPORT \n\n");
while ((tempLine = randomFile.readLine()) != null) {
if(tempLine.contains("CAT version is :"))
colon = tempLine.indexOf("is :");
catVersion = tempLine.substring(colon+4,tempLine.length());
String version=tempLine;
strBuff.append("Version : "+catVersion+"\n");
System.out.println("catVersion is :"+catVersion);
commentsFile = new RandomAccessFile(commentDir1, "r");
while ((commentLine = commentsFile.readLine()) != null) {
String checkLine = commentLine.substring(commentLine.indexOf("=")+1, commentLine.length());
String message = commentLine.substring(0,commentLine.indexOf("="));
checkLine=checkLine.toLowerCase();
tempLine=tempLine.toLowerCase();
if(tempLine.contains(checkLine))
colon = tempLine.indexOf("info -");
catVersion = tempLine.substring(colon+7,tempLine.length());
strBuff.append(message+" ==> "+catVersion+"\n");
System.out.println(message+" ==> "+catVersion);
tempList.add(message+" ==> "+catVersion);
if (catVersion.contains(startComment)){
startFlag = true;
counter++;
System.out.println("*******startFlag**********"+startFlag);
if (catVersion.contains(endComment)){
endFlag = true;
System.out.println("*******endFlag**********"+endFlag);
if (startFlag == true && endFlag == true){
System.out.println("******************************************");
System.out.println("-------------Successfull completion-------");
System.out.println("******************************************");
startFlag = false;
endFlag = false;
counter = 0;
tempList.clear();
if (startFlag == true && endFlag == false && counter > 1){
System.out.println("******************************************");
System.out.println("---------------Failure after-----:"+tempList.get(tempList.size()-1));
System.out.println("******************************************");
//startFlag = false;
//endFlag = false;
counter = 0;
tempList.clear();
commentsFile.close();
endOfFileFlag = true;
if (startFlag == true && endFlag == false && endOfFileFlag == true){
System.out.println("******************************************");
System.out.println("---------------Failure after-----:"+tempList.get(tempList.size()-1));
System.out.println("******************************************");
startFlag = false;
endFlag = false;
counter = 0;
tempList.clear();
randomFile.close();
System.out.println("hi");
finalReport=ResourceBundle.getBundle("catconfig").getString("finalReport");
savereportFile(strBuff,finalReport);
System.out.println("Report Generated");
} catch (Exception e){
System.out.println("Exception@getValuesFromFilesOnly : "+e);
public void findDetails()
String currentdir1 = ResourceBundle.getBundle("catconfig").getString("fileName");
String logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
String userdir = System.getProperty("user.dir");
RandomAccessFile randomFile = null;
StringBuffer strBuff=new StringBuffer();
StringBuffer strBuff1=new StringBuffer();
StringBuffer strBuff2=new StringBuffer();
String tempLine = null;
String catVersion = null;
String timeStr=null;
String nameStr=null;
String startIP="";
String endIP="";
String tempStart="";
String tempEnd="";
String reportFileName="";
String moduleFileName="";
String propFileName="";
int startPos=0;
int endPos=0;
int fromIndex=0;
boolean versionFlag=false;
boolean ndFlag=false;
boolean ddFlag=false;
try {
randomFile = new RandomAccessFile(userdir+logFilePath+currentdir1, "r");
while ((tempLine = randomFile.readLine()) != null) {
if(tempLine.contains("CAT version is :") && !versionFlag)
startPos = tempLine.indexOf("is :");
catVersion = tempLine.substring(startPos+4,tempLine.length());
String version=tempLine;
strBuff.append("version : "+version+"\n");
versionFlag=true;
//System.out.println("version : "+version);
if(tempLine.contains("Inside NetworkDiscoverySlider.jsp"))
ndFlag=true;
strBuff.append("ND start : "+tempLine+"\n");
if(tempLine.contains("Inside NetworkDiscoveryDetails.jsp"))
strBuff.append("ND end : "+tempLine+"\n");
//System.out.println(" ND end : "+tempLine);
if(tempLine.contains("Given IPRange from"))
startPos = tempLine.indexOf("from");
catVersion = tempLine.substring(startPos+5,tempLine.length());
strBuff.append("NDRange : "+catVersion+"\n");
//strBuff.append("NDRange : "+tempLine+"\n");
//System.out.println("NDRange :"+catVersion);
startPos=0;
fromIndex=tempLine.indexOf(":");
endPos= tempLine.indexOf(':', fromIndex+2);
//System.out.println("fromIndex : "+fromIndex+" endPos : "+endPos);
timeStr=tempLine.substring(startPos, endPos);
nameStr=catVersion.replaceAll(" ", "_");
strBuff2.append("ND_"+timeStr+" "+catVersion+" = "+"NDRange_"+nameStr+".log\n");
if(tempLine.contains("inside ByIpAddress.jsp"))
ddFlag=true;
strBuff.append("DD Start : "+tempLine+"\n");
if(tempLine.contains("start_IpAddress:"))
startPos = tempLine.indexOf("start_IpAddress:");
catVersion = tempLine.substring(startPos+16,tempLine.length());
startIP=catVersion;
if(tempLine.contains("end_IpAddress"))
startPos = tempLine.indexOf("end_IpAddress");
catVersion = tempLine.substring(startPos+13,tempLine.length());
endIP=catVersion;
if(endIP.length()==0)
System.out.println("hi5");
strBuff.append("DDSingleIP : "+startIP+"\n");
//strBuff.append("DDSingleIP : "+tempLine+"\n");
//System.out.println("DDSingleIP : "+startIP);
//startPos = tempLine.indexOf(" ");
startPos=0;
fromIndex=tempLine.indexOf(":");
endPos= tempLine.indexOf(':', fromIndex+2);
timeStr=tempLine.substring(startPos, endPos);
strBuff2.append("DD_"+timeStr+" "+startIP+" = "+"DDSingleIP_"+startIP+".log\n");
else
strBuff.append("DDRangeIP : "+startIP + " to "+ endIP+"\n");
//strBuff.append("DDRangeIP : "+tempLine+"\n");
//System.out.println("DDRangeIP : "+startIP + " to "+ endIP);
//startPos = tempLine.indexOf(" ");
startPos=0;
fromIndex=tempLine.indexOf(":");
endPos= tempLine.indexOf(':', fromIndex+2);
timeStr=tempLine.substring(startPos, endPos);
strBuff2.append("DD_"+timeStr+" "+startIP+" to "+endIP+" = "+"DDRangeIP_"+startIP +"_to_"+ endIP+".log\n");
if(tempLine.contains("set percentage completedCount: 100"))
System.out.println("hi...1");
strBuff.append("DD End : "+tempLine+"\n");
//System.out.println("DD End : "+tempLine);
reportFileName=ResourceBundle.getBundle("catconfig").getString("reportFileName");
savereportFile(strBuff,reportFileName);
if(ndFlag)
strBuff1.append("Network Discovery\n");
if(ddFlag)
strBuff1.append("Device Discovery\n");
moduleFileName=ResourceBundle.getBundle("catconfig").getString("moduleFileName");
savereportFile(strBuff1,moduleFileName);
propFileName=ResourceBundle.getBundle("catconfig").getString("propFileName");
savereportFile(strBuff2,propFileName);
} catch (Exception e)
System.out.println("error hi1");
System.out.println("Exception@findDetails : "+e);
public void savereportFile(StringBuffer strBuff,String targetFileName)
try{
String userdir = System.getProperty("user.dir");
String logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
String reportFile=userdir+logFilePath+targetFileName;
String fileContent="";
fileContent=strBuff.toString();
//System.out.println("file content : "+fileContent);
FileWriter fileWriter = new FileWriter(reportFile);
if(fileContent!=null)
fileWriter.write(fileContent);
fileWriter.close();
catch(Exception e)
System.out.println("error hi1");
System.out.println("Exception@savereportFile : "+e);
public ArrayList<String> getFileNames()
String reportFile=ResourceBundle.getBundle("catconfig").getString("reportFileName");
String logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
String userdir = System.getProperty("user.dir");
RandomAccessFile repFile=null;
String reportLine = null;
int colon=0;
int fromIndex=0;
int startPos=0;
int endPos=0;
String timeStr="";
String fileName=null;
ArrayList<String> nameList=new ArrayList<String>();
try
reportFile=userdir+logFilePath+reportFile;
repFile = new RandomAccessFile(reportFile, "r");
while ((reportLine = repFile.readLine()) != null) {
if(reportLine.contains("NDRange"))
colon=reportLine.indexOf(" : ");
fileName=reportLine.substring(colon+3, reportLine.length());
fileName="NDRange_"+fileName.replaceAll(" ", "_");
nameList.add(fileName);
System.out.println("fileName : "+fileName);
if(reportLine.contains("DDSingleIP"))
colon=reportLine.indexOf(" : ");
fileName=reportLine.substring(colon+3, reportLine.length());
fileName="DDSingleIP_"+fileName.replaceAll(" ", "_");
nameList.add(fileName);
System.out.println("fileName : "+fileName);
if(reportLine.contains("DDRangeIP"))
colon=reportLine.indexOf(" : ");
fileName=reportLine.substring(colon+3, reportLine.length());
fileName="DDRangeIP_"+fileName.replaceAll(" ", "_");
nameList.add(fileName);
System.out.println("fileName : "+fileName);
repFile.close();
catch(Exception e)
System.out.println("Error@getFileNames : "+e);
return nameList;
public void writeFile(String oldLogName,String newLogName)
try
FileOutputStream writeFile=null;
String line = null;
String userdir = System.getProperty("user.dir");
String reportFile=ResourceBundle.getBundle("catconfig").getString("reportFileName");
String newLogPath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
RandomAccessFile repFile=null;
String reportLine = null;
String tempLine=null;
String prevLine=null;
String nextLine=null;
String target=null;
String tempStr=null;
String startStr=null;
String endStr=null;
int pos=0;
boolean flag=false;
boolean writeFlag=false;
boolean versionFlag=false;
//System.out.println("newLogName : "+newLogName);
newLogPath=userdir+newLogPath;
System.out.println("newLogPath : "+newLogPath);
BufferedReader buffRead = new BufferedReader(new FileReader(oldLogName));
writeFile = new FileOutputStream(newLogPath+newLogName+".log", false);//true-for append mode
DataOutputStream dout=new DataOutputStream(writeFile);
tempStr=newLogName.replace("_", " ");
pos=tempStr.indexOf(" ");
startStr=tempStr.substring(0,pos);
endStr=tempStr.substring(pos+1, tempStr.length());
target=startStr+" : "+endStr;
System.out.println("target ===> "+target);
reportFile=newLogPath+reportFile;
repFile = new RandomAccessFile(reportFile, "r");
while ((reportLine = repFile.readLine()) != null) {
if(reportLine.contains(target))
flag=true;
prevLine=tempLine;
//System.out.println("prevLine *****: "+prevLine);
else
tempLine=reportLine;
if(flag==true)
nextLine=reportLine;
flag=false;
//System.out.println("nextLine *******:"+nextLine);
break;
repFile.close();
if(prevLine!=null && prevLine.length()>0)
pos=prevLine.lastIndexOf(" : ");
prevLine=prevLine.substring(pos+3, prevLine.length());
//System.out.println("prevLine : "+prevLine);
else
System.out.println("Starting line not available for : "+target);
if(nextLine!=null && nextLine.length()>0)
pos=nextLine.lastIndexOf(" : ");
nextLine=nextLine.substring(pos+3, nextLine.length());
//System.out.println("nextLine : "+nextLine);
else
System.out.println("Ending line not available for : "+target);
nextLine=prevLine;
while ((line=buffRead.readLine()) != null) {
if(line.contains("CAT version is :") && !versionFlag)
versionFlag=true;
dout.writeBytes(line+"\n");
if(line.contains(prevLine))
writeFlag=true;
if(line.contains(nextLine))
writeFlag=false;
break;
if(writeFlag)
dout.writeBytes(line+"\n");
dout.writeBytes(nextLine+"\n");
buffRead.close();
System.out.println("done");
catch(Exception e)
System.out.println("Exception@writeFile : "+e.getMessage());
public String folderCheck(String foldName)
File folder=null;
File newFile=null;
String[] folderContent=null;
String tempFileName="";
String newLogName="";
int count=0;
String logFilePath="";
String fileName="";
String feedBackMsg="";
String userdir = System.getProperty("user.dir");
logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
fileName=ResourceBundle.getBundle("catconfig").getString("fileName");
folder=new File(foldName);
if(folder.isDirectory())
newLogName=userdir+logFilePath+fileName;
//System.out.println("newLogName : "+newLogName);
newFile=new File(newLogName);
if(newFile.exists())
newFile.delete();
folderContent= folder.list();
if (folderContent != null && folderContent.length>0)
System.out.println("folder has files : "+folderContent.length);
for(int iterate=0;iterate < folderContent.length;iterate++){
if (folderContent[iterate].toLowerCase().contains("system"))
count++;
tempFileName=foldName+"/"+folderContent[iterate];
try
FileOutputStream appendedFile=null;
BufferedReader buffRead = new BufferedReader(new FileReader(tempFileName));
appendedFile = new FileOutputStream(newLogName, true);//true-for append mode
DataOutputStream dout=new DataOutputStream(appendedFile);
String line = null;
System.out.println("writting : "+tempFileName);
while ((line=buffRead.readLine()) != null) {
dout.writeBytes(line+"\n");
buffRead.close();
//System.out.println("done");
catch(Exception e)
System.out.println("Exception@folderCheck : "+e);
if(count==0)
feedBackMsg="syslognotavail";
//System.out.println("System Log(s) not available");
else
feedBackMsg="syslogavail";
//System.out.println(count +" System log(s) avail");
else
feedBackMsg="filesnotavail";
//System.out.println("Files are not in the folder");
else
feedBackMsg="Dirnotavil";
//System.out.println("Directory not exists in the given name");
return feedBackMsg;
public ArrayList<String> loadFileContent(String selectedStr)
//System.out.println("inside loadFileContent()");
String logFilePath="";
String propFileName="";
String line="";
String choice="";
String tempStr="";
int startPos=0;
int endPos=0;
ArrayList<String> timeList=new ArrayList<String>();
String userdir = System.getProperty("user.dir");
try
logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
propFileName=ResourceBundle.getBundle("catconfig").getString("propFileName");
propFileName=userdir+logFilePath+propFileName;
BufferedReader buffRead = new BufferedReader(new FileReader(propFileName));
if(selectedStr.equalsIgnoreCase("Device Discovery"))
choice="DD";
else if(selectedStr.equalsIgnoreCase("Network Discovery"))
choice="ND";
while ((line=buffRead.readLine()) != null) {
if(line.contains(choice))
System.out.println(line);
startPos=line.indexOf("_");
endPos=line.indexOf(" =");
tempStr=line.substring(startPos+1, endPos);
System.out.println("tempStr : "+tempStr);
timeList.add(tempStr);
buffRead.close();
catch(Exception e)
System.out.println("Exception@loadFileContent : "+e);
return timeList;
public String getFileName(String timeStr)
System.out.println("inside getFileName");
String logFilePath="";
String propFileName="";
String line="";
String tempStr="";
int startPos=0;
String userdir = System.getProperty("user.dir");
try
logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
propFileName=ResourceBundle.getBundle("catconfig").getString("propFileName");
propFileName=userdir+logFilePath+propFileName;
BufferedReader buffRead = new BufferedReader(new FileReader(propFileName));
while ((line=buffRead.readLine()) != null) {
if(line.contains(timeStr))
System.out.println(line);
startPos=line.indexOf(" = ");
tempStr=line.substring(startPos+3, line.length());
System.out.println("tempStr : "+tempStr);
buffRead.close();
catch(Exception e)
System.out.println("Exception@loadFileContent : "+e);
return tempStr;
public ArrayList loadFile()
String logFilePath="";
String moduleFileName="";
String line="";
ArrayList<String> moduleList=new ArrayList<String>();
String userdir = System.getProperty("user.dir");
try
logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
moduleFileName=ResourceBundle.getBundle("catconfig").getString("moduleFileName");
moduleFileName=userdir+logFilePath+moduleFileName;
BufferedReader buffRead = new BufferedReader(new FileReader(moduleFileName));
while ((line=buffRead.readLine()) != null) {
moduleList.add(line);
buffRead.close();
catch(Exception e)
System.out.println("Exception@loadFile : "+e);
return moduleList;
public static void main(String[] args) {
System.out.println("Inside main");
//String userdir = System.getProperty("user.dir");
//System.out.println("userdir : "+userdir);
/*ArrayList<String> fileNameList=new ArrayList<String>();
String Choice="";
String logFileName="";
String logFilePath="";
String totalLog="";
String newLog="";
String folderName="";
Choice=ResourceBundle.getBundle("catconfig").getString("Choice");
logFileName=ResourceBundle.getBundle("catconfig").getString("logFileName");
logFilePath=ResourceBundle.getBundle("catconfig").getString("logFilePath");
folderName=ResourceBundle.getBundle("catconfig").getString("folderName");
totalLog=ResourceBundle.getBundle("catconfig").getString("fileName"); */
/*try
//to write the total log
//folderCheck(folderName);
//to find the details in the given log
//findDetails();
//to split the logs accordingly
totalLog=logFilePath+totalLog;
fileNameList=getFileNames();;
System.out.println("FileNameList size = "+fileNameList.size());
for(int i=0;i<fileNameList.size();i++)
newLog=fileNameList.get(i).toString();
writeFile(totalLog,newLog);
//to analyse the logs & to produce reports
//getValuesFromFilesOnly(Choice,logFileName);
}catch (Exception e)
System.out.println(e.getMessage());
}[JSP is used for server validation.
So you need a an application server (like Tomcat or Jboss) to execute your jsp files.
you can create the .war file of your simple jsp application and put it in the server.
then you will have to access your page using a web browser.
the URL will be
http://<ComputerName or IP Address>:<PortNumber>/<WarFileName>/<MainJspPage>
(eg: http://100.100.100.252:8080/SimpleApplication/mainPage.jsp)
-Achyuth -
Can i create production order using process material ?
Dear All.
Please help me.
I want to create production order using process material (material type is PROC).
For may knowledge, process order is standard for the process material, but my customer want to use the PP module for the process material.
But I cant convert the planned order of precess material to production order in MD05.
The system message is "System does not support planned orders for process materials."
The followings are my test steps.
1. Master Creation
- Material Master, BOM, ROUTING
In standard, process material (Material Type : PROC) need creation of master recipe. But due to my clients need (Using production order
for the process material), I create the work center and ROUTING
2. DM Creation
- In MD61, I create the planned independent requirement (Type : LSF)
3. Planned order creation for the process material using MRP
- In MD01, I run the total MRP, the the planned order is created.
It's order type is "LA"
4. Converting the planned order to Production Order
- In this step, the system give the error "System does not support planned orders for process materials."
and can not do anything.
I want to know that the above case is possible, and how.
Please Help meu2026..Hi
First of if yur want to create production order or process order why do you go for material type :PROC.
you can create the same material as FERT & go ahead.
I do not understand the logic to select the material type as PROC.
Pl. go through SAP library where PROC is used.
Regards
YMREDDY
Maybe you are looking for
-
Ical will not open. crashes immediately
ical will not open. it crashes immediately. at first, it would open a blank calendar window, spin for a minute and then crash. now it just crashes immediately. i tried updating; but it didn't need it. i tried taking ical app from another mac in the h
-
17 inch mac book pro dvd jitters
I experienced a problem with the MBP DVD drive on my new mac book. I have been hearing a lot of information about the new model (related to optical drive problems) Although it's too late to get my 17 inch g4 powerbook back (sold it on ebay last week)
-
Lumia 620 - How do I 'preview' the ringtones prior...
Greetings, I bought a Lumia 620 yesterday and I cannot find a way of hearing the ringtones so that I can choose my preference. Searching on 'ringtones' and 'preview' hasn't brought anything up and neither has a good read of the User Guide. Could some
-
Can call an applet method directly in javascript?
I want to call an applet method directly in javascript as the following format: function test() ret_val = document.myapplet.mymethod(); myapplet is the applet name,mymethod is a public method in applet and it returns a string result,can that works? /
-
Services of shared services not starting
Hi All, Please help . I am using hyperion 11.1.1.3, When I am starting the services of shared service from services.msc,it's starting but again stopping in few seconds.When I logged on to event.vwr it's saying.. The description for Event ID ( 0 ) in