Can I create a secure log in using muse
can I create a secure log in using adobe muse?
Hi
check this thread, Re: Can I create a login/password protection in Muse for a HTML5 page or two?
Similar Messages
-
I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?
Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two? -
How can I create an csv/excel file using pl/sql and then sending that file
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244} -
can i create additional apple id's using the same email address for using multiple products with iCloud?
Hi Anne,
I'm pretty sure different eMail addies are needed for different Apple IDs. -
How can i create an apple id without using a visa or credit card
how can i create an apple id without using a visa or credit card
Follow the directions here, EXACTLY:
http://support.apple.com/kb/ht2534 -
How can I create a new entry without using LOV for foreign keys.
Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
How can I create a new employee without using LOV for the foreign key "job_id".
On the first page I would like to choose the job_title from adf read-only table.
After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
Regards M.Winkler
Edited by: user3541283 on 06.10.2008 03:44
Edited by: user3541283 on 06.10.2008 03:50Hi,
usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
Frank -
Dear Experts,
Could you please advise :
1) Can we create the purchase order that using profit and loss account ? ( if yes , which kind of account assignment category we should use ?)
2) How to create a purchase order for service charge .( just using GL account )
Thanks & Best Regards,
WatsonHi,
May I know why you do not use cost center for consumption?
You may create a new account assignment category in OME9 by copying K and maintain the cost center as optional. Please note that you have to maintain the item category blank and the account assignment category combination in OMG0. Now, you can use a GL account in PO which doesnt require a cost center assignment (in OBC4 against the field status group of the GL)
You may use the same account assignment category created in the previous step with item category D, after you maintain the combination of the account assignment with item category D in OMG0.
Please test the scenario and revert back.
Regards,
AKPT -
How can we create the error log in a ABAP program
Hi all,
How can we create the error log in a ABAP program
Thanks,
srinivas.Hi,
Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
Regards
Raju Chitale -
Can we create multiple session in BDC using Call session?
Hi Experts,
Can we create multiple sessions in BDC using Call Session?
Scenario:
Program has to upload 1 million records,so can we programmatically create multiple sessions such that after every 50thousand records we create a different session.
For moment due to large number of records BDC DYNPRO and BDC Field are unable to hold the large number of records,due to which we get a Out of memory error.
Thanks in advance.
ShilpaHi
If ITAB is your table with the data to be transfered:
Open the first session:
CALL FUNCTION 'BDC_OPEN_GROUP'.........
IF SY-SUBRC = 0.
FL_OPEN = 'X'.
ENDIF.
LOOP AT ITAB.
IF FL_OPEN = SPACE.
Create new session
CALL FUNCTION 'BDC_OPEN_GROUP'.........
IF SY-SUBRC = 0.
FL_OPEN = 'X'.
ENDIF.
ENDIF.
Here elaborate your data and fill BDCDATA
Insert the transaction:
CALL FUNCTION 'BDC_INSERT'
IF SY-SUBRC = 0.
COUNT = COUNT + 1.
IF COUNT = COUNT_MAX.
COUNT = 0.
Close the session
IF FL_OPEN = 'X'.
CALL BDC_CLOSE_GROUP
IF SY-SUBRC = 0.
FL_OPEN = SPACE.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
Max -
How can I create additional security with my ipad on a shared office network?
How can I create additional security with my ipad on a shared office network?
Haven't heard of any security explotes on the iPad. That should tell you security has been built in.
Great password. Set up remote wipe in case iPad goes missing. Backup iPad regularly.
Robert -
can I create bookmarks on PDF document using stadard acrobat writer? or only using professional acrobat writer?
Hi hagitl14083762,
Bookmarking in available in both Acrobat Pro and Standard. You'll find instructions here: Adobe Acrobat X Standard * Create a bookmark (while written for Acrobat X, these instructions apply to Acrobat XI as well).
Please let us know if you have additional questions.
Best,
Sara -
How can I create a full page on Adobe Muse (without side space)?
How can I create a full page with Adobe Muse (without side space)?
Muse uses Fixed width Layouts so that is not 100% possible. You can extend images and box elements to full width but not actual content.
-
How can I create a search filter on my muse project?
How can I create a search filter on my muse project like the 'sort by' function of this website? http://trufcreative.com/work
By that I mean be able to narrow down the content displayed on a single page (preferably with an animation) without having the switch pages or reload the browser.
I'm assuming this isn't something Muse can do natively, but if anyone knows the code, and how to make it work with Muse, that would be awesome.
Cheers!yes i have same problem. i couldnt create one. please help me
-
How can I create a recovery partition to use Find my Mac?
I want to activate Find my Mac on my MBP. The iCloud system preference says I don't have a recovery partition that's required for it. It apparently didn't install when I upgraded to Mountain Lion.
How can I retroactively create a recovery partition? There are no other partitions on the drive (other than the Macintosh HD, of course).
Thanks.
RobFIRST, assuming you do not have another Mac of the same model with a working restore, I would suggest using your Lion, mountaint lion or Maverick install to create a bootable system on a flash drive. You will need a DMG image created with Disk Utility from that stick to recreate the restore partition on your mac.
Once you create the bootable USB stick, Use it to log in and follow the below process to back up the restore partition. Then, save the DMG back up anywhere and finish the walk through on your normal operating partition.
Close Disk Utility if it is open.
Open Terminal
Enter the command below
defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool true
Now open Disk Utility and pull down the Debug menu
Click Show Every Partition
Now, select the Recovery Partition and create a new image.
NOTE: The Recovery Partition will need to be made in Read Only format if you wish to restore the image normally with disk utility or by software such as Deploy Studio. If you take an image with Deploy Studio and want it to restore the Recovery Drive normally, you will need to adjust the Work Flow for Image Capture to use the Read Only format. It will slow things down. If you dont use the read only format, the .dmg will not scan properly. This is most likely because the recovery drive already hosts compressed files. That said, this guide WILL restore from even a compressed .dmg image. HERE IS THE WALK THROUGH FOR RESTORING A SCANNED READ ONLY FORMATTED .DMG.
Copy the Recover HD.DMG image to a flash drive
The following must be on an Administrator account
Next, Log on to the admin account of the computer you wish to restore the MLTI Recovery Partition.
Copy the Recovery HD.DMG from your Flash drive to the HD
Enter the following command in terminal
diskutil list
If there is no partition for the restore drive listed, then use Disk Utility to create a GUID Partition keeping in mind the size of the original restore partition. (19 gigs for the MLTI Version of the restore drive)
Open Terminal and enter the following command
sudo asr -noverify -source (PATH FOR DMG IMAGE HERE) -target (PATH FOR RECOVERY HD PARTITION HERE) -erase -noprompt
NOTES: You must replace the () and everything in between with the respective path. You can simple drag and drop the source (your .dmg) and your target (the drive to be restored) while you are typing in terminal.
Enter admin password
In terminal Type the following command
diskutil list
note which disk and slice is the restore partition. It should be /dev/disk0s3, but it could vary a bit.
Now, run the following in terminal
sudo asr adjust --target /dev/disk0s3 --settype "Apple_Boot"
REMEMBER: you may need to replace /dev/disk0s3 with your new restore partition's designation.
Enter Admin Password when prompted
Restart.
Don't forget to enter the following terminal command into the machine you took the Recovery HD image from.
defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool false -
Can we create a Portal without Spaces using JDeveloper ?
Hi
Is it possible to have Portal without Webcenter Spaces (collaboration) component for WebCenter but I do require a portal with the Administration functionality found in the WL_Spaces managed Server. For instance, securing pages/portlets, LDAP/OAM integration, exchange integration, UCM integration, configuration with WSRP portlets on WL_Portlet and analytics configuration with WL_Utiltiies. Can we create a new portal (one without Spaces) using JDeveloper and create a managed server?
Cheers
KhadYes you can!
WebCenter is more than just WebCenter Spaces.
WebCenter Spaces is just one part, another part is the WebCenter Portal which is an application in JDeveloper. You might want to read my tutorial: http://www.yonaweb.be/webcenter_tutorial/introduction it explains how to build such a portal.
All the connections you make in the enterprise manager, can also be configured in JDeveloper so you can also use UCM, mail server, portlets and so on in WebCenter Portal application in JDeveloper.
It is common practice to create a new managed server on your domain to deploy the custom WebCenter Portal application. You can also manage the connections to the different service from within the enterprise manager, just as you do with spaces.
Maybe you are looking for
-
No. of Rows in an internal table
Dear Friends, Please let me know which ABAP System Field shall give me the no. of rows in an internal table. If it is sy-dbcnt kindly provide an example on how to use it in a program. Regards, Alok.
-
Updating properties in activationAgents
Hi All, how can we Update values of properties in activationAgents during deployment? i want to update the values in the below entry <property name="dispatch_incoming_file" type="LogicalDirectory">*/home/user/new*</property> <property name="dispatch_
-
How to set automatic e-mail alert for 90% threshold reach for MAXDBdatabase
Hi, I want to set automate e-mail alert for 90% threshold reach for MAXDB database i.e. data area. I want to know where i can set the automate e-mail alert for data area in MAXDB database? As i have already have script for oracle tablespace alert if
-
In Internet Explorer I can view the temporary internet files - is it possible to view the cache files in Firefox and where are they stored. Thanks for any help.
-
Weird Macbook Pro Unibody Trackpad problem
Okay, this has been bothering me for a while. I have a 2 year old Unibody 15" Macbook pro, with the glass trackpad. I used the laptop for a year, and it was perfect. One day I was sitting on the couch with the computer next to me and I push the track