Can i create credit note request with selling price,but without material no
hi
can i create credit note request with selling price, but without material no.? which item cat. i should choose?
thanks
Hi,
The price is controlled for any item category with the help of the Item Category setting (VOV7 tcode) that is, the field Pricing under Business Data section.
Select the option X in the Pricing field.
Now for your case, the setting will be greyed out. as it is a text item....
To make it for entering any option ....then change the option to A in the Item Type field.
Reagrsd
Similar Messages
-
Credit Note Request with reference to an invoice
Hi All,
We are creating a Credit Note Request referring an invoice. A Credit Note is then created referring to the Credit Note Request. However both the invoice and credit note shows as open items FBL5N.
Please help how do we get the invoice amount to be cleared once the credit note is created referring to the same? Please find below the document flow:
Sales Order => Invoice => Credit Note Request => Credit Note.
Regards,
Rajesh SinghHello,
there is not any functionality to make billing document and credit memo automatically cleared in accounting.
Only in case of cancellation (by VF11) it is possible that cancelled invoice and cancellation invoice are automatically cleared in accounting.
Sorry for the negative answer.
Best regards,
Ivano. -
Error while creating Credit Memo Request for Milestone billing invoice
Hi All,
I have a scenario where i have Milestone billing(% based) at header level in Contracts. I create Invoice for that and then try to create Credit Memo Request with reference to the Invoice.
Problem comes when we try to change the qty in the credit memo request. we are able to change the qty but the value is not changing. It remains the same constant value of that milestone.
In my copy control from Invoice to Credit memo request for the item category i have maintained the pricing type as "C" because i want to copy and manual conditions.
So kindly let me know which config setting should be done so that whenever i change the qty the value should also be changed.
Please Note : This is happening only when my billing plan is at header level. For Billing plan at Item level its working fine.....
Thanks.....Hiiii.....
Can anyone please advise on the below issue of mine.....
Thanks alot for the help.......in advance -
Hi,
Is there a bapi which i can use to create credit memo request with reference from a billing document?
dylHi Rakesh,
thank you for your reply. I am using 4.6B. i do not see that function -
Creating credit memo request - V1 498 / missing order quantity
Hi Experts,
could any of You pls help me with a credit memo creation issue?
I credit memo needed to be created based on invoice, so configuration and copy control is done as usual, but I have a failure during CR order creation referring to an invoice F2.
I got an error message: V1 498 - Credit already exist for item... - and no qty is transferred to new document
I have gone thought the threads on Forum, but none of the suggested solution was appropriate to solve the issue:
- the document flow is updated in copy control ,
- I can no remove the schedule line flag at VOV7 - the order qty will be missed but target qty is used, and end up incompletition (VU 019 error messge), so billing is faile
- completition control set as B at VOV7,
Still have the problem
Could any of You pls help me - answers will be appreciated.V1 498 - Credit already exist for item...
What the above message means is that lines items have already been used as reference for the creation of credit memo request(s).
Create a new sales order, delivery and billing document. Then create credit memo request with reference to this new billing document and test.
In VTAF copy control, at item level, field "Pos./neg. quantity" dictates how the quantity in the source document is affected by copy control.
PS - I tried to create credit memo with reference to billing document (F2), there were no issues there. Therefore I am taking that the issue is with credit memo request (copied with ref to billing document F2) -
Message V1478 - Credit memo request with reference to an invoice
Dear all,
Creating a credit memo request with reference to an invoice, I get the following message "Material in item 000060 does not exist in plant/storage location".
Of course, this material exists in the plant and the storage location, as we could create the invoice without any problem.
Any idea?
Best regards,
InéHello
Generally, these errors may appear due to:
- The plant is marked for deletion.
- The plant should be copied from the referenced item.
So, I would suggest you to
- Check copying control for Invoice to Credit memo request, particularly, item.
- Try and create Credit Memo Request with reference to sales order.
- Or if you want rectify a invoice, then use invoice coreection request.
Thanks & Regards
JP -
Credit Memo request with reference to billing document
Dear all,
I am having a requirement to create credit memo request with reference to Billing document. But the issue is, I have separate pricing procedure for normal sales to billing, and different pricing procedure for CMR to Credit memo.
When I am creating CMR with reference to Billing document it copies the pricing procedure, Please suggest how to block pricing procedure to get copied. (please note that B: redetermine pricing, is not working in this case)
Suitable points for valuable answers guerenteed.
Regards
BidhuHi,
In VTAF maintain the folowing parameters,
HEADER
053,103 and 03 in the Data T in this order from top to bottom,maintain 021 in the billing header box and check the copy item number box.
ITEM
153,104,004 in the Data T in this order from top to bottom,maintain 303 in the copying requirements box and pricing type E.
This should resolve your issue. -
Credit Memo request with reference to Billing Document number via IDoc
Hi,
I want to create credit memo request with reference to billing document number via IDocs.
I have tried through ORDERS05, but when I process I saw that it is only processing with reference to contract number or quotation.
So is any other way of creating credit memo request creation with reference to Billing document number via IDocs?
Thank you in advance.
Regards,
SanthiPlease Help... it is Urgent... Thank you
-
I read the supporting article. But those pictures were old. Also the format had changed. I can't create an Apple ID with no credit cards? I got no credit cards. I am just a secondary student and how can I have a credit card?
Follow the instructions on this page exactly : http://support.apple.com/kb/HT2534 i.e. select a free app and click on 'create Apple ID' when 'buying' it (it worked for me yesterday).
-
Credit memo request with currency conversion to EURO
I have a requirement in which i need to create a Credit Memo Request for the newly created sales organisation using the old billing document number created for old sales organisation.New sales org will have its currency changed to EURO.I referred to a FM named 'Pricing' where the currency conversion is done.
The requirement is to get the current price in EURO from the price list instead of currency conversion to EUR.The current price has to be extracted from new pricelist.
Your inputs in this regard is highly appreciated.HI
Am not on SAP system now, so will try to give you
info with what i can recollect.
You can use FM: SD_SALESDOCUMENT_CREATE for creating
Credit Memo Request. Note that reference document and
reference type should be passed for identifying the
reference document as invoice. Please consider these as
initial inputs to explore on the same. Regarding the
pricing, it can be configured either at order type or
copy control to carry out new pricing so it can take
directly from condition records.
Hope the above info can help you in exploring on the same.
Kind Regards
Eswar -
Credit memo request with zero net value
Hello all,
when we create a credit memo request (VA01, doc type CR) and put a material quantity into the credit memo request that falls below the scale in VK13, the net value for the material will be zero.
We do not want to allow to save the credit memo request with a zero net value, but SAP will just allow us do that.
I was wondering if there is a way to pop up a warning or even an error message that avoids saving the document in case of a zero net value?
Thanks
AnneHi,
You can make the condition type (for which $0.00 is not allowed) as mandatory condition type in the pricing procedure. By this way the system will give error and wont allow to proceed any further unless the data is complete. (make sure this is not affecting your regular sales order cycle).
Or if you just want to give a pop-up message then you can use user exit USEREXIT_SAVE_DOCUMENT_PREPARE in include MV45AFZZ
Regards, -
Collective billing for credit note requests
Hi ERP Gurus,
i'm trying to bill in a single credit note (billing document) many credit note requests generated through a rebate partial settlement.
I'm using the billing due list functionality (tcode VF04) with collective billing execution mode.
I got a dubt while seeing the billing document created because as many rows as the sum of the items of the two sales documents were created even if there were some common items.
I would like to have a summation if one item (i.e. a material) is present in more than one sales document but i wanna also be sure that the rebate agreement will be correctly taking in consideration the billing document created.
Anybody can support me on that?
Any suggestion is well accepted
Thanks and regards
C*Hi Carmine,
If you could use any of the user exits to do it may be it will help you to solve you problem better, use a userexit while creating a billing document with more than one reference and then try to check and summate the materials in the user exit.
try this and let me know if this works...
even I did the same in my pro and it worked..
thanks & regards
raviraj -
Create credit memo request using inbound IDOC
Hi Experts,
I want to create credit memo request using inbound IDOC, currently I am using GSVERF03 basic type and process code GSVE, I am getting below error:
No records exist in T661W for vendor XXXXX, plant, unloading point
Anyone suggest me is this correct message type to create credit memo request or suggest me the correct one. because we are working with customer sales order and invoice not with vendor purchase order.
Thanks for your help.ah, apologies i read outbound! I think you are using the correct message type i.e. GSVERF.
Can you not simply create the missing entry in T661W? i.e. for the missing records? -
Problem while creating credit memo request using BAPI
HI,
I am trying to create credit memo request using the BAPI_SALESDOCU_CREATEFROMDATA1..
I am getting the error as " No customer master data is available for the customer". But the customer exists in the KNA1 table. What is the mistake i hv done.. this s my code..
REPORT ZSV_CREDITMEMO_TEST1.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = 'G2'.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = '0001'.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = ''.
headerx-distr_chan = 'X'.
Division
header-division = ''.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = ''.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = '0000C10130'.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = ''.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = 'C20011'.
itemx-material = 'X'.
Plant
item-plant = ''.
itemx-plant = 'X'.
Quantity
item-target_qty = '10000'.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = '10000'.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
can anyone tell what the error is.?Hi
please look at code below code this succefully creating credit memo may some help to you
header-doc_type = 'ZS4'.
PERFORM get_plant.
headerx-doc_type = 'X'.
header-sales_org = wa_temp1-vkorg.
headerx-sales_org = 'X'.
header-purch_no = wa_temp1-bstnk.
header-distr_chan = wa_temp1-vtweg.
headerx-distr_chan = 'X'.
header-division = wa_temp1-spart.
header-purch_no_s = wa_temp1-bstnk.
headerx-division = 'X'.
wa_partner-partn_role = 'AG'.
wa_partner-partn_numb = wa_temp1-kunnr.
APPEND wa_partner TO it_partner.
wa_partner-partn_role = 'WE'.
wa_partner-partn_numb = wa_temp1-kunnr.
APPEND wa_partner TO it_partner.
CLEAR: wa_partner.
LOOP AT lt_temp2 INTO wa_temp2 WHERE kunnr = wa_temp1-kunnr.
"AND matnr = wa_temp1-matnr.
*wa_item-itm_number = wa_temp2-posnr .
wa_item-material = wa_temp2-matnr.
wa_item-plant = wa_temp2-werks.
wa_item-req_qty = wa_temp2-fkimg * 1000.
wa_item-target_qty = wa_temp2-fkimg * 1000.
APPEND wa_item TO it_item.
ENDLOOP.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
EXPORTING
order_header_in = header
* WITHOUT_COMMIT = ' '
* CONVERT_PARVW_AUART = ' '
IMPORTING
salesdocument = v_vbeln
* SOLD_TO_PARTY =
* SHIP_TO_PARTY =
* BILLING_PARTY =
return = return
TABLES
order_items_in = it_item
order_partners = it_partner.
IF v_vbeln <> space.
wa_vbeln-vbeln = v_vbeln.
APPEND wa_vbeln TO lt_vbeln.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
HIDE wa_vbeln-vbeln.
CLEAR: wa_partner,header,v_vbeln, wa_temp2.
REFRESH: it_partner,it_item.
ELSE.
* LOOP AT return .
it_error-srno = idx.
it_error-err_msg = return-message.
APPEND it_error.
* ENDLOOP.
ENDIF.
idx = idx + 1.
ENDLOOP.
Regards -
How To Create Credit Memo Request In CRM
Hi Friends,
I have to create CMR i.e. Credit Memo Request with Header and Item details but I am not able to do it.
Kindly let me know the BAPI / FM with some example. Also, do let me know which all values are mandatory for the FM or BAPI structures.
I will definitely reward points if the solution will help me in creating the CMR.
Thanks,
PradeepHi Rekha,
I have to create CMR with following details :
Description To be displayed in Header
Status : i.e. Create / Open
Item Detail
Product and quantity
Hope I am clear in this.
Regards,
Pradeep Singh Dhadwal
Maybe you are looking for
-
What is NMDB and why does it want to connect to netbios?
Only lately have I been getting a connection warning for this... what is it? Anyone know? e
-
Yum update problems with iwl*-firmware
Hello, I install an oracle linux 7 machine and after the installation when I try to apply updates, I get many errors all related to iwl*-firmware. If I do yum remove iwl* Then all the other updates install correctly. I tried to clean the metadata a
-
Explain plan not available in dba studio
Hi, guys, Why the explain plan not available in my dba studio with a message like this "explain plan not available for this sql statement. ora-02195: attempt to create permanent object in a temporary tablespace" Another question: I can use "set autot
-
Forgive me because I'm in a state of confusion over all the options that now exist called iCloud, and iTunes sync and iPhone & iPad setting to do this, that, and the other thing. I have an iPhone & iPad. On the iPad (Apple) calendar, opened this morn
-
Urgent issue, Suddenly no data is extracted Once I create new infopack
Hi, I have an urgent issue and need help. We were loading data after activating business content. Every thing worked fine and the delta load was also smooth. However, in order to start everything afresh, I deleted all the info package, deleted the "I