Can I create my own Sync Security Key?

I would like to be able to create my own security key for Sync. Is this possible?

Hi 'sounder,
This topic has been discussed several times since the beginning of the year. Click here for a prebuilt search that will pull up several useful discussions.
Regards,
Barry

Similar Messages

Complex Splits - Can I Create my Own?

Hi,
Im just wondering if in Mainstage 2. can i creat my own complex splits with the freedom of what ever instruments i want. Like one side would be dragndrop sample kit, the middle would be an ultra beat, and the third, right side, woulc be a keyboard. is that possible?

Ok Great. I figured out how to make as many splits i as want to. Thats good.
However.
Now im trying to lower the octave of just one of the instruments im using my novation sl 61 key. for example. i am just trying to make a basic split with a drum and bass. so i found the drum noise i want. say its breaks remix. or big beat remix. depending on what you have on your computer. so then im trying to use a bass noise from the c3 all the way up c1-b2 is the drum... Anyway. the noise that i hit it on the bass is still to high pitched. i need to keep the mapping the same as it is understanding the split for the keyboard, but i just need to lower the octave just the bass noise. i hope that makes sense.

Where can I enter my Firefox sync recovery key?

Where can I enter my Firefox sync recovery key?

hello, you could try this "hack" to get a new firefox version to connect to an old sync account:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up), right-click somewhere in that page & create a new string preference named '''services.sync.username'''with a value like '''fake'''.
afterwards you should be able to connect to the old account through the firefox options > sync panel. if this worked and you could import your data successfully, please migrate to the new sync afterwards: [[How to update to the new Firefox Sync]]

Can we create our own loops? Basic question.

Hi,
Can we create our own loops in Logic Pro. I see in all the tutorials. They are either taking input from external instruments OR use existing apple loops.
I have tried FL studio demo to create our own loops. But there is no trial version for Logic Pro. Need your inputs before I purchase it.
Thank you.
Anji

Yes you can!
It is as simple as selecting a Region (optional trimming recommended) and choose the Export command.
A Dialog window opens up that lets you enter the metadata
Apple had its separate "Apple Loop Utility" app (now only available in the developer package) that allowed you to create loops in a standalone app. The built-in loop capability in Logic uses part of that engine.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Can I create my own attributes in iDS?

I know to store my photo I can use the jpegPhoto attribute, but what about if I want to store other binary objects like maybe my fingerprints, can I create my own attributes for it, and how?
Or I can't do that?

You can use Directory Server Console to create new attributes. After adding new attributes to your schema, you must create a new object class to contain them.
Creating object class:
1.Click Create on the Object Classes tab.
2.Enter a unique name for the object class in the Name text box.
3.Enter an object identifier for the new object class in the OID (Optional) text box.
4.Select a parent object for the object class from the Parent drop-down menu.
5.To add an attribute that must be present in entries that use the new object class,highlight the attribute in the Available Attributes list and then click the Add
button to the left of the Required Attributes box.
6.To add an attribute that may be present in entries that use the new object class,highlight the attribute in the Available Attributes list and then click the Add
button to the left of the Allowed Attributes box.
7.To remove an attribute that you previously added, highlight the attribute in the Required Attributes list or the Allowed Attributes list and then click the
corresponding Remove button.You cannot remove either allowed or required attributes that are inherited
from the parent object classes.
8.Click to OK.
To create a new attribute:
1. Display the Attributes tab.
2. Click Create.
The Create Attribute dialog box is displayed.
3. Enter a unique name for the attribute in the Attribute Name text box.
4. Enter an object identifier for the attribute in the Attribute OID (Optional) text box.
5. Select a syntax that describes the data to be held by the attribute from the Syntax drop-down menu.
6. If you want the attribute to be multi-valued,select the Multi-Valued checkbox.The Directory Server allows more than one instance of a multi-valued attribute
per entry.
7.Click OK
This is repersenting binary data.
You can represent binary data, such as a JPEG image, in LDIF using one of the following methods:
The standard LDIF notation, the lesser than (<) symbol. For example:
jpegphoto: < file:/path/to/photo
If you use this standard notation, you do not need to specify the ldapmodify -b parameter. However, you must add the following line to the beginning of your LDIF file, or your LDIF update statements:
version:1
For example, you could use the following ldapmodify command:
prompt% ldapmodify -D userDN -w user_passwd
version: 1
dn: cn=Barney Fife,ou=People,dc=siroe,dc=comchangetype: modify
add: userCertificate
userCertificate;binary:< file: BarneysCert
Using base 64 encoding. You identify base 64 encoded data by using the ::
symbol. For example:
jpegPhoto:: encoded_data
In addition to binary data, other values that must be base 64-encoded include:
Any value that begins with a semicolon (;) or a space
Any value that contains non-ASCII data, including new lines Use the ldif command-line utility with the -b parameter to convert binary data to LDIF format:
ldif -b attribute_name
where attribute_name is the name of the attribute to which you are supplying the binary data. The binary data is read from standard input and the results are written to standard output. Thus, you should use redirection operators to select input and output files.
The ldif command-line utility will take any input and format it with the correct line continuation and appropriate attribute information. The ldif utility also assesses whether the input requires base 64 encoding. For example:
ldif -b jpegPhoto < mark.jpg > out.ldif
This example takes a binary file containing a JPEG-formatted image and converts it into LDIF format for the attribute named jpegPhoto. The output is saved to
out.ldif.
The -b option specifies that the ldif utility should interpret the entire input as a single binary value. If -b is not present, each line is considered to be a separate input value.

Can I create my own categories in a Numbers checkbook?

Can I create my own categories in a Numbers checkbook? If so, how?
I would be most grateful for anyone's help with this matter.
Respectfully,

Hi 'sounder,
This topic has been discussed several times since the beginning of the year. Click here for a prebuilt search that will pull up several useful discussions.
Regards,
Barry

I have the retail iCloud account. How can I delete it? And how can I create my own account?

I have the retail iCloud account. How can I delete it? And how can I create my own account?

Welcome to Apple Support Communities
To delete the iCloud account, open Settings > iCloud, scroll to the bottom and select Delete account. Then, log in with the Apple ID you want to use with iCloud

How can i create my own component

hello all,
how can i create my own componet,
say for example i want to create my own JTextField.
give me links, or give me a examples
thanks
daya

http://www.onjava.com/pub/a/onjava/2004/08/11/desktop.html

How can i create my own t-code

hi ,
how can i create my own t-code with a specified applications? may i know the t-code for create a t-code
Edited by: amarnath popuri on Nov 24, 2008 10:53 AM

Hi amarnath popuri
Use t-code SE93 to create a t-code.
Check below link.
http://help.sap.com/erp2005_ehp_02/helpdata/EN/43/2c43b427bf601fe10000000a422035/frameset.htm
Regards
Ashok

How can I create my own toolbar like SmartBar??

I would like to know how can I create my own toolbar that works like the default smart bar.
I need to work with a smart bar, but i have to create it, and it has to work like the default one.
the smart bar should be able to navigate along my different forms/canvases.
Can someone help me??
With regards
Tiago Valador

Tiagor,
you can't change the smart bar. All you can do is to create a hrizontal toolbar canvas.
Frank

How can i create my own file from the Adobe Export PDF to Word ?

How can I create my own file from the file of the Adobe Export PDF to Wodrd?

If there is handwritten content in your PDF then ExportPDF can't convert that to word.
~Deepak

Can you create your own Themes

Please help I'm new to iweb and I'm trying to figure out who to create my own theme, complete with my own color palette, fonts etc? I maintain my sororities website and everything has to be pink and green but I would like for our site to have the professional look iweb provides without all of the hassel of custom coding. I just need a few text pages, calendar, photo album, etc. Feel free to check out our current site if will help you point me in the right direction. http://www.akaupsilontauomega.org/
thanks in advance.

Welcome to the Apple Discussions. To create a complete theme with all the different pages takes considerable coding knowledge.
I think it would be more expedient to start with a blank page of the white theme and add your shapes, colors, photos, etc. that you want to use. Be careful regarding use of non web safe fonts. If you do it can change how the site looks when viewed by visitors on PCs which might not have that font on their machine. See the following regarding web safe fonts:
Common fonts to all versions of Windows & Mac equivalents
OT

UWL Help - How can i create my own task within the Enterprise Portal

Dear all,
I am currently working with UWL .
I have tried the customization and those stuffs associated with UWL , and it is working properly.
My current issue is , how can create my own task within the Portal ( not using Ad Hoc Workflow , which is present in Portal) ?.
If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
Is there any API regarding UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
How can i add that custom task in the drop down ?.
I have tried the customization of existing UWL.
I shall be grateful to those who can help me to solve this issue with links regarding the solution of my problem's.
with regards
Kishor Gopinathan

Hi Kishore,
I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
Thanks
Vijay

Can I create my own .cbx file or modify a current .cbx file?

What I would like to do is create an object that will give me a DOUBLE Action Verification message (Are you sure? YES! Are you REALLY SURE? YES!) I'm doing this already with a cloggy of pop-up messages, and wanted a CLEANER and Easier way to do this. My thought was to modify the current PUSHBUTTON -- logctrl.cbx file. Or create a similar one. Any thoughts???

If this is the case, have you thought of using the Aggregate object? You can "create" your own Object out of the existing pop-up windows and push-buttons once and for all and keep using this as an "Object" in future.
Here's a snippet from the Online Help on the Aggregate Object:
The Aggregate object is a way for you to create a collection of Lookout objects, already connected and configured, and use that collection multiple times as an element in your processes.
Create an aggregate by creating a Lookout process and saving the process as an aggregate definition file, choosing which of the object parameters and data members to expose when aggregate is used in another process. Then use that aggregate definition process in other processe
s by creating an aggregate object that uses your aggregate definition as its source. ...

Can we create range variable for Query Key Date

Hello Gurus,
Can we create a range variable for Query Key Date ? when I tried to give a range of values for Query Key Date, I am unable to find Range Values option. I found only Single Values.
so, Please let me know if we can use Range variables for Query Key Date ??
Thanks in advance,
Regards,
Aarthi

Hi Aarthi,
This is relevant for the time dependant master data that is being pulled in thw query. Like if you are using a nav attr in the query and this nav attr is time dependant, then which record (from the char master data) is to be pulled into the report, depends upon the key date that you specify.
The default key date value is the date on which the query is executed, that is <Today>.
Hope this helps...

Can I create my own Sync Security Key?

Similar Messages

Maybe you are looking for