Can I create subtitles in Encore on videos specifically for web (not DVD or blu ray)?

I have a premiere pro project in Spanish and would like to add English subtitles with the final product being an MOV or MP4 file with permanent subtitles to upload to vimeo and embed on a website. Is this possible in Adobe Encore? No DVD or blu ray will be created.

Burned in subtitles are done in Premiere with the titler.

Similar Messages

  • Can anyone explain how I go from a Sony HD camcorder .m2ts file to viewing the video in HD on either DVD or Blu-Ray?

    I have recently started to edit footage taken on a Sony HD Camcorder using iMove 11.
    Uploading the .m2ts file was no problem straight from the camera to iMovie, but I (stupidly) assumed that I could burn an HD DVD from iMovie/iDVD to view on a DVD player. I've done a bit of internet research to find out why the quality of the DVD is so bad i.e. SD rather than HD and I think I understand it. Just.
    Further searching to find out our to convert AVCHD/.m2ts to either HD DVD or Blu-ray has boiled my brain. So much stuff I read was a couple of years old so I wasn't sure what is possible.
    Can anyone tell me how I get to the point where I can upload the .m2ts to the iMac, edit the footage and burn a Blu-Ray or HD DVD?
    Cheers!

    Booted the Mac this morning and it now works. I tried Alchroma's solution but whether the stereo is Plain or Matrix, it works both ways. I don't think that this was the solution as a result, but thanks for the suggestion. To confirm, my Easy set up is HD / AVCHD Apple 1920 x1080i60, the only thing I can think I did differently compared to yesterday is that I shut my Mac down having changed the Easy setup. Previously, I only changed the easy setup then closed FCE4 down.

  • How can I create multiple versions of a video within the same project?

    OK...this is a probably a very basic question but I'm not sure how to word it clearly.
    How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
    Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

    How can I create multiple versions of a video within the same project?
    You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

  • How can I create a new entry without using LOV for foreign keys.

    Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
    How can I create a new employee without using LOV for the foreign key "job_id".
    On the first page I would like to choose the job_title from adf read-only table.
    After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
    Regards M.Winkler
    Edited by: user3541283 on 06.10.2008 03:44
    Edited by: user3541283 on 06.10.2008 03:50

    Hi,
    usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
    Frank

  • How can I create a new partition to install Windows 7 by not using Bootcamp

    How can I create a new partition to install Windows 7 by not using Bootcamp?

    If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
    Your question seems a bit blurry so I'm giving you a general tip here.
    If you want to just try the beta you can always use Sun's "Virtualbox".

  • How can i fix a clip when the video and audio are not matching up?

    How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

    I would try detaching the audio and the dragging the audio to the left or right until it lines up.

  • Can i create a WSDL Definition in SAP 4.7 Web AS 620 system?

    Can i create a WSDL Definition in SAP 4.7 Web AS 620 system?
    I am asking this because; I didn't find the WebServicesBrowser in the following path.
    bc/bsp/sap/webservicebrowser/search.htm.
    I am asking this because, i didn't find the WebServicesBrowser in the following path, even though it is available in BSP Application.
    Ranga Manthena

    you wont see this sicf path,
    just run the following ulr
    http://<wasserver>.domain.com:port/bc/bsp/sap/webservicebrowser/search.htm
    make sure that the ICAMN is running (transaction SMICM).
    also make sure dependant services are active in transaction SICF
    Dependant services (relavant for all BSP applications) needs to be activated. (refer OSS Note No.517484)
        List of services to be activated (as per OSS note 517484)
        /default_host/sap/bc/bsp/sap                                        
        /default_host/sap/bc/bsp/sap/system                                 
        /default_host/sap/bc/bsp/sap/public/bc                              
        /default_host/sap/public/bc
        /default_host/sap/public/bc/ur
        /default_host/sap/public/bsp/sap/public                             
        /default_host/sap/public/bsp/sap/public/bc                          
        /default_host/sap/public/bsp/sap/system                             
        /default_host/sap/public/bsp/sap/htmlb
    Regards
    Raja

  • HELP!How to create HD disc that will play back in HD DVD or Blu-Ray player?

    Footage comes from Panasonic HVX200 as DVCPRO HD 1080i60, all appropriate settings made in FCP5 to edit. Have already made SD DVD, whoopie.
    Now client is interested in real HD version that they can play back on HD DVD or Blu-Ray set top unit. Of all my research, I've discovered little about how to make a "real" HD video disc. OSX doesn't support Blu-Ray burning, OK. What about HD DVD burning support? And what drive to purchase for this application?
    I understand DVD Studio will allow me to author a disc with HD content...that I can burn onto DVD5. Useless to the client. Need to burn on either Blu-Ray or HD DVD media.
    Aside from encoding in Compressor, what do I do when I need to make this HD disc happen? Compressor step seems easy enough to figure out. Just very unclear on how to burn out appropriate video disc.
    Thanks for your help.

    For Blu-Ray creation:
    I'm curious if DVDit! works in parallels too, though it will certainly work in BootCamp. The question is what format should FCP/Compressor output to in order for DVDIt, etc. on BC or Parallels need in order to create the disc?
    MPEG-2 and H.264 should work, but who knows?
    In the meantime, I have HDV source footage that I edit. I print the final edit back to HDV for archiving, and burn a HD-DVD on a DL DVD+R red laser disc to show on my Toshiba HD-DVD player using DVDSP. It works, and I can get about 40 minutes of MPEG-2/HDV on there without transcoding at 1080i and it looks fantastic.
    In the future, I hope to be able to dump the HDV final edit onto a Blu-Ray disc. I'm guessing Adobe Encore will be needed on the Mac for that.
    The point here is there certainly are options that work. I do wish Apple added Blu-Ray burning capability.
    There's still room for that, however... FCS 1 (and even now 2, with AVCHD support, albeit non-native) have histories of adding new support for codecs, etc. in free updates.

  • Can not burn a Blu-ray disc

    The problem: Can not burn a Blu-ray disc.
    I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”.  I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems.  I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works.  The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's.  Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc?  Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

    Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
    In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements.  I assumed I have to do the same thing with a Blu-ray too.  I've tried following this procedure, also tried using the live file system.  Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting.  One suggestion has been that another program is interfering with premiere elements.  I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
    I Have a lot of great suggestions from you guys and I really appreciate it.  I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system.  I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements.  I appreciate the input regarding Cyberlink software.  I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
    Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1.  Time is money, the cost of a new Blu-ray burner is insignificant.  I will consider this option later.

  • Encore freezes when I change from DVD to blu ray

    When I open Encore, or link from Premier pro CS4, and change from DVD to blu ray Encore freezes completely. Not even alt - ctrl - del works.
    Everything works fine when making DVD's, the problem comes when trying to change to blu ray.
    Has anyone seen this problem, - what can I do?

    Welcome to the forum!
    Please search the forum for "Roxio fix".  Apply the pxengine patch and try again.
    -Jeff

  • I canot change an .img (video) file to a .mov file. It ends in .img no other endings. It plays on my computer but not on my blue Ray player TV. It came from Finalcut Pro as a home movie. Any help?

    want to change .img to .mox or .avi but won't convert. It is a movie from Finalcut pro 10.1.3 as a home video. I am on IMAC 10.1.1 yosemity. I have tried 3 different video convcerters. It plays on my computer but not recognized by blue ray player on TV. - Roger

    Julie O wrote:
    I just purchased the MPEG2 component but it can't be installed on Yosemite using the installer. Do you have to manually drop it into a certain area folder?
    Have you followed the instructions on the Square5 website>MPEG Streamclip for Mac>Lion/Mountain Lion and MPEG2 Playback Component?
    Russ

  • Encore CS4 - Main Menu Loops / Repeats Every Few Seconds (Blu-Ray)

    Hello there,
    I am experiencing a rather unusual issue with Encore CS4 in which after burning my project to Blu-Ray the main menu (which has a two minute long audio track linked to it) appears to "reset" itself every one or two seconds repeatedly, thus making it next to impossible to select any of the buttons on the menu itself. (I should also note that I've tried playing this disc on both my Blu-Ray player and my computers Blu-Ray drive and both of them have produced the exact same results)
    Any help would be greatly appreciated.
    Thank you

    The only thing I can think of to try is to delete the menu from your project (again!).  Also delete the .wav file asset.  Save the project, then close Encore.  Launch En and open any other project.  Go to Edit | Preferences | Media and clean the cache.  Re-open the problem project and re-import the .wav file and the menu.  Hopefully cleaning the cache will reset whatever En is doing with the menu audio.
    -Jeff

  • Can you make a fully automated Action using Save for Web? - Illustrator CC

    I have been trying to create a simple action using the Save for Web feature. When I run the created action it stops on the Save to Web window until I click on "Save" then it brings up the finder window asking me to select where to save it and I then have to click "Save" At that point the Action continues to run and completes.
    I'm using this process to export JPEGs of client labels for an web based government submission. The guidelines are pretty tight and the Save for Web gives me the best results for File Size, Image Size, and Quality... basically the files have to be small, but legible. Our files are organized in a Client/Project/SKU structure so batch processing with the Export command is not really an option.
    I have created many actions & batches over the years, but never had this kind of issue with such a simple action. Is there a way to bypass these prompt similarly to what a batch would do?

    I would love to know the answer to this as well. I am having the exact same issue. Super annoying

  • I have created a new (alias) email address specifically for general emails (shopping, etc). I was expecting it to pop up in Mail, Inbox next to my existing .mac account. It's not there so where do I find it?

    I have created a new (alias) email address specifically for general emails (shopping, etc). I was expecting it to pop up in Mail, Inbox next to my existing .mac account. It's not there so where do I find it?

    Aliases are merely another address within the same account, you won't see additional groups of settings for them. You should however see them as an option in the pull down "From" menu when you create an email.

  • We feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.pls answer

    we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.

    I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
    I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
    Anyway, I ran some commands and here are the results:
    megaraid -showstatus
    MEGARAID CLI version 1.0.12
    No cmd argument
    Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
    megaraid -showdevices
    Physical devices Available = 3
    Drive ID Identification Size(MB) Status
    0 Hitachi HDS722580VLSA80 78529 Failed
    1 Hitachi HDS722580VLSA80 78529 Online
    2 Hitachi HDS722580VLSA80 78529 Online
    diskutil list
    /dev/disk0
    #: type name size identifier
    0: Applepartitionscheme *153.3GB disk0
    1: Applepartitionmap 31.5KB disk0s1
    2: AppleHFSServer HD 153.2GB disk0s3
    /dev/disk1
    #: type name size identifier
    0: Applepartitionscheme *2.6GB disk1
    1: Applepartitionmap 31.5KB disk1s1
    2: AppleDriveATAPI 4.0KB disk1s2
    /dev/disk2
    #: type name size identifier
    0: untitled *467.0KB disk2
    /dev/disk3
    #: type name size identifier
    0: untitled *95.0KB disk3
    /dev/disk4
    #: type name size identifier
    0: untitled *95.0KB disk4
    /dev/disk5
    #: type name size identifier
    0: untitled *95.0KB disk5
    /dev/disk6
    #: type name size identifier
    0: untitled *219.0KB disk6
    megaraid -showconfig
    Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
    0 5 64 156958 Degraded
    megaraid -showapater
    FW Version = A130
    Bios Version = G117
    Product Name = MegaRAID SATA 150-4D
    Cache Size = 64MB
    diskutil checkRAID
    No RAID sets found
    Thank you for your help. I really appreciate it and so do the teachers and the students!

Maybe you are looking for