Can I create x1 CR layout for all databases

Hi
Is it possible to have x1 Crystal Report Layout for x17 Databases with different Logos (Logos are based off the databases), a little detail:
We have x17 databases on the same SQL Server, I have created a Crystal Report which can be used for all companies / databases but I am wanting to know if there is a possibility to have this x1 Crystal Report and everytime you print from the relevant database it pulls that specific company Logo? Is there any Crystal Syntax to create this? especially when the field is labelled "Picture2" and is not a SBO Table & Field.
It seems logical than having x17 Crystal Reports.
Any ideas?
Regards
Kurt Walters

Hi Julie
Thanks for the reply, for your last alternative:
"An alternative is to embed all 17 picture files into your layout, one on top of the other, and conditionally suppress each one based on the database name"
I tried this with an If statement based off Company Name on the OADM table but was having issue with the If Statement (Format Editor > (X+2) Button next to Supress > Format Formula Editor - Suppress).
I will give the Print Preferences a Go but will it be possible with a If statement?
Regards
Kurt Walters

Similar Messages

  • How can I set default toolbar layout for all users in my system?

    Hi everybody! I am running a local ubuntu server at my office. I can set some defaults preferences (about:config) for all new users in the system by defining those prefs in the /etc/firefox/syspref.js.
    Now, I want to define default toolbar layout in a similar way (maybe not needed but fun), to copy the toolbar layout for my user. Is there a general way to do that?
    thank you in advance!

    You can try to create a default template folder (defaults/profile) in the Firefox and place the file(s) in that folder for newly created profile.
    The only way to customize an existing profile is to copy files directly to it.

  • Can we create a SAP report for all messages displayed inRWB

    Hi All,
    We are planning to create an SAP report (in XI or R/3) which will display the status of all the messages in the XI adapter engine. I wish to know if this is possible and if yes, then can someone throw some light on it.
    <b>Scenario:</b><u></u>
    Inbound XML messages are coming to XI from legacy system and finally are sent to R/3 from XI.
    In R/3 and XI we have SXMB_MONI or SXI_MONITOR to see the overall status of the message pipeline.  However if there are some adapter issues, the messages are stuck in the adapter and never get shown on SXI_MONITOR. Only way to see these messages is through RWB.
    So can we create a report in R/3 or XI which displays such messages stuck in RWB  .
    Appreciate your response on same.
    Thanks and regards
    RK

    alerts can be triggered for RWB errors also. So when it is triggered there will be an entry in tables related to alert. from there u can read and make use of it in a table. there are workaorunds which we need to explore. to read the text from sxmb_m,oni there are f/n mod aviable...not able to get one but can be found in debuggin

  • How can I create a custom dock for all users?

    Hello,
    I would like to create a custom dock for everyone that uses a certain Mac. I have found a bunch of stuff, but it is outdated. Most of the tutorials are for 10.4 or 10.5. I am using 10.7.4 and I have found nothing regarding that. Can anyone point me in the right direction?
    Thanks in advance

    Hello,
    I am not sure how I wound-up in the server forum. I am using the desktop version of OS X 10.7.4.
    Thanks

  • How can I create a default dock for all users (Mavericks)?

    I would like to modify the dock to display specific installed applications.
    I then want this dock to be the default dock for any users that log in.
    OS is Mavericks.
    All users are AD users.
    No server management.
    We use Deep Freeze to revert the Mac to the way we set it up.
    I can find info for previous versions of OSX; basically just copying the plist, but I can't find anything that works for Mavericks.
    Any help would be appreciated!

    You could set up a user template for new user accounts, but you can’t stop individual users from modifying their Dock to suit their needs.
    I don’t know how to modify the user template, so you’ll have to google for it.

  • Create a new layout for VF04

    hi all,
    how can i create a new layout apart from the standard for VF04 ( maintain billing due list ) , reason being the user does not require all the fields which are on display in the std one.
    Hence forth i want to create a new user specific layout.
    regards,
    sudarshan

    After executing VF04 create new layout, (settings -> Layout). Hide the columns you do not want to be displayed. If you want to change in the options available in the selection screen to the user then Goto -> Variants -> Save as variant.
    After that you create Z-transactions using SE93 and assign these Variant and Layout. Then assign Z-transaction to the users.
    Cheers.
    Ashish

  • Can we create 'Bulding Block string' for autonumbering?

    Hi All,
    Can we create 'Bulding Block string' for autonumbering in FM 9? If you have any idea about it, pls share...
    What i am asking you is, if I want to insert an image or a special charactors instead of number in auto numbering , how I can achive that?
    Regards,
    Jobin.

    Jobin,
    Strictly speaking you can’t. But, as Peter Golden recently commented: »There’s always a way to do something that can’t be done in FrameMaker in FrameMaker.«
    If you upload a screen shot with a mock-up of the desired layout the forum participants might come up with good ideas how to achieve this.
    - Michael

  • HT4436 My family has multiple iPhones.  Can we use one Apple ID for all of our phones?

    My family has multiple iPhones.  Can we use one Apple ID for all of our phones?

    If you use the same AppleID for iMessage and iCloud though, you will all be sharing the same message account and iCloud email account.  You can use a common AppleID for purchased content, but each create your own unique AppleID for iMessage and iCloud so you each have your own private accounts for those services.

  • How can I create a Forms9i Runtime for client distribution

    Currently we have an application developed in Forms 5.0.6.8.0 our Database has been upgraded to 9i DB. The application is working fine with this combination but we want to upgrade Forms in order to get Oracle Support. We just get the Developer Suite 9i package and we're trying to test our application with this software.
    How can I create the client runtime for Forms 9i?
    My application will work with Win 95 and 98?
    Thanks.

    Oracle9i Forms is web-only. Forms 6i is the last release of Forms to have client/server and character mode.
    You can test Forms from the Builder by installing iDS. To deploy Forms using iAS follow the documentation. It's all there in the deployment guide.
    iAS and Forms doco can be found on OTN.
    Regards,
    Robin Zimmermann
    Forms Product Management

  • HT5622 How can I create an Apple ID for my child without linking it to a credit card?

    How can I create an Apple ID for my child without linking it to a credit card?

    Hi Kappy..
    that did use to be the case but ios 8 you can create a child's Apple ID which will stay linked to the main Apple ID until they are 13 when they can if you wish take over the Apple ID themselves.
    I Have the same question regarding creating an Apple ID for my son but it insists I have to add a credit card to prove I'm an adult.
    thing is I don't have another card to add to my Apple ID I have been using the same card for all my family's Apple purchases i just update my details when I get issued a new one.
    Any ideas or suggestions greatly accepted.
    cheers

  • Can I create a single PO for two company codes

    Hi
    Can I create a single PO for two company codes. Though I know that Company code is assigned at header level but still I know there is a setting in controlling which when activated two company codes under same controlling area can procure the goods under the same PO.But i forget from where to activate that message or control in config.
    Thanks

    Hi Lekhram,
    I'm just beginner so maybe I got the wrong end of the stick.
    If you order something that something must belong to a definite company > plant. How could possess two company the same thing at the same time (totally)?
    (companies are at the same organisational level - none of them is subject to the other).
    Maybe I'm mistaken.
    So I <b>guess</b> you can use only one company code for one PO.
    Controlling area & company code
    http://help.sap.com/saphelp_46c/helpdata/en/e5/077a704acd11d182b90000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/08/513f4b43b511d182b30000e829fbfe/frameset.htm
    Purchasing & organisation
    http://help.sap.com/saphelp_46c/helpdata/en/75/ee0a9555c811d189900000e8322d00/frameset.htm
    All the best
    Csaba

  • Is there a way to create a "common desktop" for all RD/TS 2012 users? (Office 2010 icons on the dekstop, for example.)

    Hello!  Just like the title, is there a way to create a "common desktop" for all RD/TS 2012 users?
    I know how to do this using regular W7 workstations and 2008 Servers, but the "Default" folder under the USERS directory is gone and I'm not sure how to get the icons there in Windows 8, let alone Server 2012 Remote Desktop.
    I've installed Office 2010 on the 2012 server, but every end user that logs in has to manually type in "Word," "Excel." "PowerPoint." etc from the metro interface, then right-click each icon to add the shortcut to the desktop.
    Given the... uh.. unfamiliarity of our endusers around the computer, this really isn't the best option.  What I'd like is them to log on and have all the Office icons ready and availible for them.
    Any ideas?
    Matthew J. Fazio

    Hi,
    You can edit the local GPP and create a desktop shortcut for all users.
    Reference:
    Customize the default local user profile in windows Server 2012
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/3f178a0e-128e-4f4f-870a-90c8bbf1afeb/customize-the-default-local-user-profile-in-windows-server-2012?forum=winserver8gen
    Also, you can use CopyProfile to customize the Default User Profile.
    Customize the Default User Profile by Using CopyProfile
    http://technet.microsoft.com/en-us/library/hh825135.aspx
    Best Regards.
    Jeremy Wu
    TechNet Community Support

  • Urgent: How to create a new layout for portal lightframeworkpage

    Expert,
    I want to create a new layout for  external facing portal. I have created a new par project also in NWDS, but being new I do not know where to get "com.sap.portal.layouts.default.par" and other supporting libraries.
    Need an urgent help.
    Thanks in advance
    -Lave Kulshreshtha

    Hi,
    Look into this blog to know, how to write custom layouts:
    Nuts and Bolts of the External Facing Portal (EFP)
    Once you wrote your layout jsp, then declare it in portalapp.xml like this:
    <component name="example_narrowWide">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
            <property name="com.sap.portal.pcm.Description" value="two-column layout displaying the narrow column on the right"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="*yourLayout.jsp*"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="Left Column">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="Right Column">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
    As all the layout taglibs and required classes are in com.sap.portal.pagebuilder application, you should refer to it in your portalapp.xml SharingReference property.
    Try all this and if you have specific questions, let me know.
    Regards,
    Praveen Gudapati

  • Can I create a parent category for a series of categories?

    I have created a list of construction works in categories with subtotals for each article.
    Can I create a parent category for a selection of categories?
    For example:
    categories:
    - masonry
    - windows
    - plumbing
    each with subtotals.
    Now I want to create a parent categorie: - house #1, with a total of all subtotals

    Yes, using the Reorganize control. It's done in the opposite order though—create the (parent) category, then create the subcategories.
    Detailed instructions are available in Chapter 3, Using Tables, of the Numbers '09 User Guide. The guide may be downloaded through the Help menu in Numbers. A search on 'categories' will take you to the TOC page where you can click to go directly to the discussion of Categories and Sub categories.
    Regards,
    Barry

  • Can we create different reservation no for each auto PR created through PS.

    Hi Gurus
    With reference to above captioned subject, can we create different reservation no for each auto PR created through PS
    Thanks in advance
    Regards
    Abhijit Sen

    Hi,
    The reservation number will be same for all the material components in one network.
    so as long as there are "n" components in one networks then all the "'n" components will have the same reference number.
    If you need different reservation numbers then need to maintain those components in multiple networks.
    Hope its useful.
    Reward points if useful.
    Thanks..

Maybe you are looking for